RTS Rvon-io User manual

F.01U.193.280

Rev. 18

NOVEMBER/2014

RVON-I/O User Manual

Bosch Security Systems, Inc.

Technical Manual

RVON-I/O 2

F.01U.193.280

Rev. 18

PROPRIETARY NOTICE

The product information and design disclosed herein were origi-

nated by and are the property of Bosch Security Systems, Inc.

Bosch reserves all patent, proprietary design, manufacturing, repro

-

duction, use and sales rights thereto, and to any article disclosed

therein, except to the extent rights are expressly granted to others.

COPYRIGHT NOTICE

reserved. Reproduction, in whole or in part, without prior written

permission from Bosch is prohibited.

*All other trademarks are property of their respective owners.

WARRANTY AND SERVICE INFORMATION

For warranty and service information, refer to the appropriate web

site below:

RTS Intercoms .............................. www.rtsintercoms.com/warranty

RTS Digital

RTSTW

AudioCom

RadioCom

Intercom Headsets ....................................................www.telex.com

CUSTOMER SUPPORT

Technical questions should be directed to:

Customer Service Department

Bosch Security Systems, Inc.

www.telex.com

TECHNICAL QUESTIONS EMEA

Bosch Security Systems Technical Support EMEA

http://www.rtsintercoms.com/contact_main.php

DISCLAIMER

The manufacturer of the equipment described herein makes

no expressed or implied warranty with respect to anything

contained in this manual and shall not be held liable for any

implied warranties of fitness for a particular application or

for any indirect, special, or consequential damages. The

information contained herein is subject to change without

prior notice and shall not be construed as an expressed or

implied commitment on the part of the manufacturer.

THE LIGHTNING

FLASH AND

ARROWHEAD

WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

“DANGEROUS

VOLTAGE” INSIDE

THE PRODUCT.

CAUTION: TO REDUCE

THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE

COVER. NO USER-

SERVICABLE PARTS

INSIDE. REFER

SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

THE EXCLAMATION

POINT WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYING

THE PRODUCT.

SEE MARKING ON BOTTOM/BACK OF PRODUCT.

WARNING: APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR

SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHALL BE PLACED ON THE APPARATUS.

WARNING: THE MAIN POWER PLUG MUST REMAIN READILY OPERABLE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING OF

THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPRATUS TO RAIN OR MOISTURE.

WARNING: TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY

ATTACHED TO THE FLOOR/WALL/RACK IN ACCORDANCE WITH THE

INSTALLATION INSTRUCTIONS.

This product is AC only.

Bosch Security Systems, Inc.

Technical Manual

RVON-I/O 3

F.01U.193.280

Rev. 18

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

4 RVON-I/O

Table

of

Contents

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

INTRODUCTION ......................................................................................................................... 3

Description ...............................................................................................................................................3

Features ....................................................................................................................................................3

Reference View ........................................................................................................................................4

LED Explanation of the LED Device Status Module ............................................................................................. 4

Specifications ...........................................................................................................................................5

Default Ethernet IP Addresses .................................................................................................................6

Pin Outs for Connections .........................................................................................................................7

Connection Diagrams ..............................................................................................................................8

DIP Switches ............................................................................................................................................9

INSTALLATION ........................................................................................................................ 11

System Requirements .............................................................................................................................11

Reset the Current IP Address to the Default RVON-I/O IP Address ....................................................12

Basic Installations ..................................................................................................................................13

Basic Local Mode Setup .................................................................................................................................... 13

Basic Remote Mode Setup ................................................................................................................................ 14

RVON-I/O Trunk Setup .................................................................................................................................... 15

RVON Serial Pass-through Setup ...................................................................................................................... 15

System Diagrams ...................................................................................................................................17

RVON-1 Jumpers and Connections .......................................................................................................21

J2 Connector ...................................................................................................................................................... 21

CONFIGURATION .................................................................................................................... 23

Setup IP Addresses .................................................................................................................................23

Configure the IP Address from a KP-32, KP-632, or a KP-832 ....................................................................... 23

Configure the IP Address from a KP-812 ......................................................................................................... 24

Configure the IP Address Using Telnet ............................................................................................................. 26

Configure the IP Address Using the Serial Debug Port .................................................................................... 27

Configure the RVON-I/O Using Telnet or a Serial Port ................................................................................... 28

Configure RVON-I/O Using Telnet and Serial Port ......................................................................................... 29

RVON-I/O Command Table ..................................................................................................................31

Default Setup ..................................................................................................................................................... 35

Set Serial ............................................................................................................................................................ 35

Set GPIO ............................................................................................................................................................ 35

Set Panel ............................................................................................................................................................ 37

Setting Channel Information of an RVON-I/O for a Remote Keypanel ............................................... 40

Bosch Security Systems, Inc.

Technical Manual

6 RVON-I/O

Rev. 18

F.01U.193.280

BASIC NETWORK CONFIGURATION ..................................................................................43

Basic Network Configuration ................................................................................................................43

LAN (local area network) vs. WAN (wide area network) ................................................................................ 43

WIDE AREA NETWORK ................................................................................................................................ 44

ACCESSING THE WIDE AREA NETWORK (WAN) .................................................................................. 44

NETWORK ADDRESS TRANSLATION (NAT) ........................................................................................... 45

PORTS ............................................................................................................................................................... 45

IP ADDRESSES ................................................................................................................................................ 47

Ping a Computer ................................................................................................................................................ 48

POSSIBLE PITFALL WITH ROUTERS, GATEWAYS, AND SWITCHES ................................................. 48

RVON Configuration .............................................................................................................................50

Network Terminology ............................................................................................................................51

RVON TRUNKING CONNECTIONS .......................................................................................55

Notes ......................................................................................................................................................63

List

of

Figures

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

FIGURE 1. RVON-I/O Reference View ............................................................................................... 4

FIGURE 2. DB-9 Crossover Cable Connection Diagram ..................................................................... 8

FIGURE 3. RJ-12 to DB-9 Crossover Cable Connection Diagram ....................................................... 8

FIGURE 4. RJ-21 To DB-9 Connection Diagram ................................................................................. 8

FIGURE 5. RJ-45 to DB-9 Connection Diagram .................................................................................. 8

FIGURE 6. RJ-45 to DB-9 Crossover Connection Diagram ................................................................. 8

FIGURE 7. Straight DB-9 to DB-9 Connection Diagram ..................................................................... 8

FIGURE 8. Serial Pass-Through system diagram ............................................................................... 16

FIGURE 9. Local Mode ....................................................................................................................... 17

FIGURE 10. Remote Mode ................................................................................................................... 18

FIGURE 11. Local and Remote Mode ................................................................................................... 19

FIGURE 12. Trunking with RVON-I/O ................................................................................................ 20

FIGURE 13. Front and back of the RVON-1 board .............................................................................. 21

FIGURE 14. UPL Statement Example .................................................................................................. 36

FIGURE 15. AZedit Via RVON-8 RS-232 Mode ................................................................................. 57

FIGURE 16. CS9500 Trunking Via RVON-I/O To RVON-8 ............................................................... 58

FIGURE 17. ADAM Trunking Via RVON-8 ........................................................................................ 59

FIGURE 18. Zeus II Trunking Via RVON-I/O to RVON-C ................................................................. 60

FIGURE 19. Cronus Trunking Via RVON-I/O To RVON-8 ................................................................ 61

FIGURE 20. RVON-16 Trunking .......................................................................................................... 62

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

2 RVON-I/O

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

CHAPTER 1

Introduction

Description

Coupled with the same VOIP technology used with the RVON-8, the RVON-I/O can take legacy analog audio and convert it to

digital VOIP audio. The RVON-I/O expands the boundaries of digital audio to include analog conversion. There are many

applications in which the RVON-I/O can be used, such as:

• ADAM Matrix AIO to RVON-I/O to RVON-1, RVON-8, RVON-I/O or VOIP Virtual Keypanel.

• Zeus to RVON-I/O to RVON-1, RVON-8, RVON-I/O or VOIP Virtual Keypanel.

• ADAM to RVON-I/O to Zeus

• Cronus to RVON-I/O to RVON-1, RVON-8, RVON-I/O or VOIP Virtual Keypanel.

• McCurdy 9500 to RVON-I/O to RVON-1, RVON-8, RVON-I/O or VOIP Virtual Keypanel.

RVON-I/O is fully compatible with the following internationally recognized standards and protocols; G.711, G.729AB, G.723.

Features

8 Channels of Bidirectional Audio

Plus Keypanel Data -

The RVON-I/O supports eight (8) channels in and out and has configurable

network bandwidth parameters that can be tailored to individual network

conditions. Supports local and remote keypanels.

Addressing - Eight individually addressable audio channels. The RVON-I/O can feed

simultaneously VoIP (Voice Over Internet Protocol)-capable keypanels, as well

as, various other matrix intercom systems.

Ethernet Capabilities - The RVON-I/O uses standard Ethernet protocols and is compatible with

10 BASE-T and 100 BASE-TX Ethernet compliant devices and networks.

4 Introduction RVON-I/O

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

Reference View

LED Explanation of the LED Device Status Module

FIGURE 1. RVON-I/O Reference View

# Red LED Green LED

1

VOIP not connected

channel 1

VOIP connected

Channel 1*

2

VOIP not connected

channel 2

VOIP connected

Channel 2*

3

VOIP not connected

channel 3

VOIP connected

Channel 3*

4

VOIP not connected

channel 4

VOIP connected

Channel 4*

5

VOIP not connected

channel 5

VOIP connected

Channel 5*

6

VOIP not connected

channel 6

VOIP connected

Channel 6*

7

VOIP not connected

channel 7

VOIP connected

Channel 7*

8

VOIP not connected

channel 8

VOIP connected

Channel 8*

9 GPO 1 asserted GPI 1 asserted

10 GPO 2 asserted GPI 2 asserted

11 GPO 3 asserted GPI 3 asserted

12 GPO 4 asserted GPI 4 asserted

13 GPO 5 asserted GPI 5 asserted

14 GPO 6 asserted GPI 6 asserted

15 GPO 7 asserted GPI 7 asserted

16 GPO 8 asserted GPI 8 asserted

17

18

Pass-Through Serial TX

Activity

Pass-Through Serial

RX Activity

19

20

Shell Log Message (TX)

Activity

21 Ethernet Half Duplex

Ethernet Full

Duplex

22 Ethernet 10 Mbps Ethernet 100 Mbps

23 Ethernet Not ‘AUTO’ Ethernet Link Good

24 Remote Mode Processor Good

*Green LED wink periodically when a keypanel is

connected.

** If both LEDs are off or not lit, the channel is not

configured (this only applies to LEDs 23-16).

RVON-I/O Introduction 5

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

Specifications

NOTE: The playout delay and bandwidth depend on the configured amount of audio per packet. The bandwidth values

are for bidirectional audio without VA D (Voice Activity Detection) enabled.

Analog Audio Specifications

Signal Type: Fully differential (balanced)

Nominal Level: 8dBu

Maximum Level: 20dBu

Input Impedance: High (22K Ω)

Output Impendance: Low (600 Ω)

A/D and D/A Specifications

Sampling Rate: 8 KHz

Resolution: 8 bits

Converter Architecture: 128x Over-sampling Σ - Δ Modulator

Connections

RJ-45 Ethernet

DB-9 I/O Port (8 bidirectional audio and keypanel data; Male)

DB-25 GPI/O Connection (Female)

DB-9 Relay Port (Female)

DB-9 Serial Port

Power

90-240 VAC

Physical

1 RU (height)

19 inches (482.6 mm) wide X 8 inches (203.2 mm) deep

Digital

TABLE 1. Digital Specifications

Codec Bit Rate Coding Delay Playout Delay Bandwidth MOS*

G.7 11 64 125 μs 20-60 ms 160-224 kbps 4.3

G.729AB 8 10 ms 20-120 ms 32-112 kbps 3.95

G.7 23 5.3, 6.3 30 ms 60-120 ms 29-45 kbps 3.5, 3.9

*MOS (Mean Option Score) or ACR (Absolute Category Rating) is a widely known voice quality measuring method. The

scale ranges from 5 (excellent) to 0 (unacceptable). The typical desirable range for VOIP transmission is from 3.5 to 4.2.

6 Introduction RVON-I/O

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

Default Ethernet IP Addresses

TABLE 2. Default Address for the RVON Product Line

Product Default IP Address Default Subnet Mask

RVON-I/O 192.168.0.1 255.255.0.0

RVON-8 192.168.0.2 255.255.0.0

RVON-1 192.168.0.3 255.255.0.0

RVON-C 192.168.0.4 255.255.0.0

RVON-16 192.168.0.5 255.255.0.0

GPIO-16 192.168.0.6 255.255.0.0

MCII-e 192.168.0.7 255.255.0.0

Cronus 192.168.0.8 255.255.0.0

Zeus III 192.168.0.9 255.255.0.0

RVON-I/O Introduction 7

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

Pin Outs for Connections

NOTE: The DB-25 pin GPI/O connector can be

directly connected to the Zeus, Zeus II, ADAM

CS, and ADAM

** Connection to a Cronus Intercom requires a customer

cable assembly.

RJ-45

Function Ethernet

1 Ethernet TPO+

2 Ethernet TPO-

3 Ethernet TPI+

4 TPO+

5 TPO-

6 Ethernet TPI-

7 TPI+

8 TPI-

DB-9

Function I/O

1 RS485+

2 RS485-

3 N/A

4 RVON-I/O Audio IN+

5 RVON-I/O Audio IN-

6 N/A

7 RVON-I/O Audio OUT-

8 RVON-I/O Audio OUT+

9 N/A

See page Figure 2, “DB-9 Crossover Cable Connection

Diagram,” on page 8.

DB-9 Function Serial Port

1 N/A

2 RXD, RVON-I/O Received Data (RS485-)

3

TXD, RVON-I/O Transmitted Data

(RS485+)

4 N/A

5 GND

6 N/A

7 N/A

8 N/A

9 N/A

DB-9

Function Relay 1&2

1 Closed 0

2 Open 0

3 +12V Through 300 Ohm Resistor

4 Closed 1

5 Open 1

6 Common 0

7 GND

8 GND

9 Common 1

DB-25 Pin Function GPI/O

1 GPO 1

2 GPO 2

3 GPO 3

4 GPO 4

5 GPO 5

6 GPO 6

7 GPO 7

8 GPO 8

9 GND

10 GND

11 GND

12 GND

13 GND

14 GPI 1

15 GPI 2

16 GPI 3

17 GPI 4

18 GPI 5

19 GPI 6

20 GPI 7

21 GPI 8

22 GND

23 GND

24 GND

25 GND

DB-9

Function Relay 1&2

8 Introduction RVON-I/O

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

Connection

Diagrams

FIGURE 2. DB-9 Crossover Cable

Connection Diagram

FIGURE 3. RJ-12 to DB-9 Crossover

Cable Connection Diagram

FIGURE 4. RJ-21 To DB-9

Connection Diagram

FIGURE 5. RJ-45 to DB-9

Connection Diagram

FIGURE 6. RJ-45 to DB-9 Crossover

Connection Diagram

FIGURE 7. Straight DB-9 to DB-9

Connection Diagram

RVON-I/O Introduction 9

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

DIP Switches

DIP Switch 1: RVON-I/O Mode

Default Position: Open

Switch Position: Open - Local Mode

Closed - Remote Mode

Description: There are two (2) modes in which the RVON-I/O can run: local and remote mode

In Local mode, keypanels are directly connected to the RVON-I/O. For example, a KP-32 is

connected serially to the RVON-I/O which is connected via Ethernet to the RVON-8 in the

ADAM system. The connection between the KP-32 and the RVON-I/O is local.

In Remote mode, a digital keypanel (such as a KP-32 with RVON-1) is connected to an

RVON-I/O, which is then connected to an ADAM CS, Zeus, Cronus or an ADAM with AIO

cards.

NOTE: To see system drawing scenarios of both local and remote mode, see “System

Diagrams” on page 17.

DIP Switch 2: Serial Debug Shell, IP Configuration on Port 8

Default Position: Open

Switch Position: Open - Pass-through port enabled, IP configuration on Port 8 disabled.

Closed - Serial Debug Shell enabled; IP configuration on Port 8 enabled.

Description When the Dip switch is open, the pass-through port is enabled.

The Pass-through Port is used to send serial port data over Ethernet.

When the Dip Switch is closed, serial debug and IP Configuration on I/O port 8 is enabled.

The Serial Debug Shell provides the user access to a command shell (this is similar to Telnet,

except the connection is made through a serial cable).

The IP configuration on I/O Port 8 allows users to connect and configure the IP Address of the

RVON-I/O using a compatible keypanel (KP-32, KP-632, KP-832, and KP-812) connected

serially to I/O Port 8 on the back of the RVON-I/O. IP Configurations are made from the

keypanel service menu. Note, you must have keypanel firmware version 2.02 or higher to

configure the IP Address.

DIP Switch 3: Telnet Shell

Default Position: Open

Switch Position: Open - Telnet Shell is enabled

Closed - Disabled, user name and password are set to default

Description Using telnet, you can set permissions and configurations within the RVON-I/O application. See

Table , “RVON-I/O Command Table,” on page 31.

DIP Switch 4: Boot Downloader

Default Position: Open

Switch Position: Open - Boot downloader is disabled (runs the native flash program)

Closed - Boot downloader is enabled (runs the boot downloader)

Description:

Switches to the boot downloader flash program. This program is sent with the RVON-I/O in case

the native flash program becomes corrupt.

10 Introduction RVON-I/O

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

CHAPTER 2

Installation

The RVON-I/O can operate in one (1) of two (2) modes, local mode or remote mode. When operating in local mode, keypanels

are directly connected to the RVON-I/O. For example, a KP-32 is connected serially to the RVON-I/O, which is connected via

Ethernet to the RVON-8. The KP-32 RVON-I/O is in local mode. When operating in remote mode, a digital keypanel (such as

KP-32 with RVON-1) is connected via Ethernet to an RVON-I/O, which is then connected to an intercom.

System Requirements

Before you install the RVON-I/O, verify the following items are updated:

Product Firmware

RVON-I/O 1.0.0 or higher

RVON-1 1.1.0 or higher

RVON-8 1.2.0 or higher

Master Controller 9.22.0 or higher

KP-32 2.0.2 or higher

AZedit 2.08.0 or higher

VKP 1.0.1 or higher

12 Installation RVON-I/O

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

Reset the Current IP Address to the Default RVON-I/O IP Address

The RVON-I/O is shipped with a default IP Address already configured on the unit. The default IP Address is 192.168.0.1, the

default Netmask is 255.255.0.0, the default Gateway is set to zero. This feature is useful when using an RVON-I/O in the field

(i.e.; a mobile truck) where the IP Address is constantly changing from on destination network to the next. By being able to

reset the IP Address to a default address, you will be able to connect to the RVON-I/O without having to remember the IP

Address of the previous location. For more information on configuring the IP Address, see

“Reset the Current IP Address to

the Default RVON-I/O IP Address” on page 12.

To reset the IP Address to default on the RVON-I/O, do the following:

1. On the front of the RVON-I/O unit, push and hold buttons 1 and 2, then push the RESET button.

Hold the buttons in for 15 seconds or until all the LED lights blink rapidly. When all the LED lights blink rapidly, the

RVON-I/O IP Address has been reset to the default.

NOTE: If buttons 1 and 2 are pressed during power on, the unit will reset the IP Address.

RVON-I/O Installation 13

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

Basic Installations

On the following pages, installation for Basic Local Mode, Basic Remote Mode, and Basic Trunked systems is explained.

IMPORTANT: When using Zeus with RVON-I/O or GPI/O you must clear the Configure onboard GPI/Os in FR9528

mode check box in AZedit before you configure your system. If you set this after you configure your

panels, it causes the Zeus configuration to be reset.

Basic Local Mode Setup

NOTE: Keypanel version is not relevant in local mode.

In local mode, the keypanel is directly connected to the RVON-I/O through the use of a DB-9 serial cable.

To setup an RVON-IO local mode system, do the following

1. On the back of the RVON-I/O, put DIP switch 1 in the Open position (local mode).

2. Power on the RVON-I/O unit.

3. Connect keypanels to the RVON-I/O (I/O ports), using a straight DB-9 (serial cable). See page 8

4. Connect the RVON-I/O to the Ethernet.

5. Set the IP Address for the RVON-I/O.

6. Using telnet or serial programming, configure the RVON-I/O as follows:

NOTE: To see actual Telnet commands, see “RVON-I/O Command Table” on page 31.

set channel [chan]

dest ip_addr (IP Address of the RVON-1, RVON-8, or RVON-I/O that is connected to the RVON-I/

O)

dest_type (the type of device, either an RVON-1, RVON-8, or RVON-I/O)

dest_chan

dest_codec (optional)

7. Once you are finished configuring the RVON-I/O, type activate into the command prompt to activate the

configuration setup on the RVON-I/O.

14 Installation RVON-I/O

Bosch Security Systems, Inc.

Technical Manual

F.01U.193.280

Rev. 18

Basic Remote Mode Setup

In Remote Mode, the keypanel with RVON-1 installed is directly connected to the RVON-I/O via Ethernet.

To setup a basic remote mode system, do the following:

1. On the back of the RVON-I/O, put DIP switch 1 in the closed position (remote mode).

2. Power on the RVON-I/O unit.

3. Connect the matrix system to the RVON-I/O (I/O ports), using a DB-9 crossover cable. See page 8 for the different

connection diagrams.

4. Connect the RVON-I/O to Ethernet.

5. Set the IP Address for the RVON-I/O (see “Setup IP Addresses” on page 23).

6. Using Telnet or Serial programming (see “RVON-I/O Command Table” on page 31), configure the RVON-I/O as

follows.

NOTE: To see actual Telnet commands, see “RVON-I/O Command Table” on page 31.

set channel [chan]

dest ip_addr (IP Address of the RVON-1, RVON-8, or RVON-I/O that is connected to the RVON-I/

O)

dest_type (the type of device, either an RVON-1, RVON-8, or RVON-I/O)

dest_chan

dest_codec (optional)

set panel [panel]

poll_id (see “Set Panel” on page 37)

baud

7. Once you are finished configuring the RVON-I/O, type activate into the command prompt to activate the

configuration setup on the RVON-I/O.

NOTE: If you do not have a RVON-1 pre-installed, the KP-32 or the KP-812 must have the RVON-1 component

installed prior to Remote setup (See the RVON-1 User Manual for details).

Page is loading ...

RTS Rvon-io User manual

RTS Rvon-io User manual

Related papers

Other documents