Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range
Ecoflam on Open Base, Island, 1
Side
ITEM #
MODEL #
NAME #
SIS #
AIA #
Short Form Specification
Item No.
APPROVAL:
Electrolux Professional
www.electrolux.com/foodservice
Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range Ecoflam on Open Base,
Island, 1 Side
Modular Cooking Range Line
S90 Heavy Duty 2-Burner Gas Range
Ecoflam on Open Base, Island, 1 Side
584237 (GC1G11A1BF)S90 2 OPEN GAS BURNERS
(41,000 BTU), ECOFLAM,
OPEN BASE, ISLAND, 1SIDE
OPERATION
Unit to be Electrolux S90 Heavy Duty one 17,000 BTU (5 kW) and one 24,000
BTU (7 kW) burner gas range on open base with ecoflam. Unit to be installed
in central island type installations with operations from one side. High
efficiency burners with continuous power regulations to high power of
41,000 BTU’s (12 kW). Thermocouples as standard on burners for added
safety. Body and open base of unit entirely in 304 Stainless steel. Pan
supports in heavy duty cast iron. Unit shall have heavy duty 304 Stainless
steel internal frame with reinforcement on the top of 3 mm. Extra strength
work top in heavy duty 3 mm Stainless steel. “Lastertec” connection system
permits units to be connected to each other creating a seamless work top.
Main Features
•Unit for island type installation with operations by chef from
one side (knobs only on one side of the console).
•The one 5 kW and one 7 kW high efficiency burners suit high
performing cooking requirements for the most demanding
customers.
•Model is supplied with Ecoflam pan detection system, which
saves energy and reduces unnecessary heat radiation in the
kitchen.
•Large sized pan support in cast iron (stainless steel as
option) with long center fins to allow the use of the largest
down to the smallest pans.
•Open base compartment for storage of pots, pans, sheet
pans, etc.
•Flat deep drawn spillage area with removable pan supports,
burner rings and flame ignition parts.
•Heavy duty internal frame in 304 type Stainless steel with
reinforcement on top of 3 mm.
•3 mm top in 304 type Stainless steel.
•“Lasertec connection system” creates seamless work top
when units are connected to each other.
•Unit delivered with four 200 mm legs as standard (all round
Stainless steel kick plates as option).
Optional Accessories
•Shelf for one side open bases and hot
cupboards, W=500mm, thermaline
800&900
PNC 910777 ❑
•Stainless steel front kicking strip, 500mm PNC 911555 ❑
•Stainless steel kicking strips, against wall
installation, left and right
PNC 911639 ❑
•Kit for wall mounted installation for units
700mm high
PNC 911670 ❑
•Lower side panel (300mm) for wall
mounted installation for units 700mm
high, leftside
PNC 911671 ❑
•Lower side panel (300mm) for wall
mounted installation for units 700mm
high, rightside
PNC 911672 ❑
•Portioning shelf, 500mm widthPNC 911851 ❑
•Portioning shelf, 500mm widthPNC 911873 ❑
•Shelf fixation kit for open and hot base, GN
1/1, 1 side operated
PNC 911914 ❑
•Side panel, freestanding installations (units
without rear C-board)
PNC 911949 ❑
•Side panel, back to back, rightPNC 911952 ❑
•Side panel, back to back, rightPNC 911954 ❑
•Side panel, back to back, leftPNC 911955 ❑