dji Go User guide

Type
User guide

This manual is also suitable for

3
Contents
EN
KR
IT
CHT
ES
NL
CHS
DE
PT
JP
FR
RU
User Guide
4
使用说明
10
使用說明
16
ユーザーガイド
22
사용자 가이드
28
Bedienungsanleitung
34
Guía del usuario
40
Guide de l'utilisateur
46
Guida dell'utente
52
Gebruiksaanwijzing
58
Manual do utilizador
64
Руководство пользователя
70
Compliance Information
76
EN
4
Disclaimer and Warning
Congratulations on purchasing your new DJI
TM
product. The information in this document
affects your safety and your legal rights and responsibilities. Read this entire document
carefully to ensure proper conguration before use. Failure to read and follow instructions
and warnings in this document may result in serious injury to yourself or others, or damage
to your DJI product or damage to other objects in the vicinity. This document and all other
collateral documents are subject to change at the sole discretion of DJI. For up-to-date
product information, visit http://www.dji.com and click on the product page for this product.
By using this product, you hereby signify that you have read this disclaimer and warning
carefully and that you understand and agree to abide by the terms and conditions herein. You
agree that you are solely responsible for your own conduct while using this product, and for
any consequences thereof. You agree to use this product only for purposes that are proper
and in accordance with all applicable laws, rules, and regulations, and all terms, precautions,
practices, policies and guidelines DJI has made and may make available.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or
indirectly from the use of this product. The user shall observe safe and lawful practices
including, but not limited to, those set forth in this document.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its afliated
companies. Names of products, brands, etc., appearing in this document are trademarks or
registered trademarks of their respective owner companies.
Introduction
The DJI Focus Handwheel 2 enables users to control aperture, focus or zoom on the
INSPIRE
TM
2 and OSMO
TM
Pro/RAW cameras precisely and conveniently.
[8]
[10]
[9]
[1]
[4]
[7]
[2]
[6]
[5]
[3]
[4]
EN
5
[1] Focus Wheel
Controls the camera lens.
[2] Stiffness Control
Adjusts focus wheel stiffness.
[3] Marking Ring
Provides a marking scale.
[4] Hard Stop Screws
Adjustable hard stops limit the focus wheel travel range.
[5] Power Switch
Toggle the power switch to power on/off the Focus Handwheel 2.
[6] Status LED/Backlight
Indicates the communication status and illuminates the marking ring from behind.
[7] LENS Button
Opens lens travel settings and switching between focus, aperture or zoom control,
subject to lens compatibility.
[8] DJI Rosette Mount
Used when mounting and securing the Focus Handwheel 2.
[9] Communication Port
Connects to the Osmo Pro/RAW.
[10] Pogo Pin
Connects to the Inspire 2 DJI Focus Handwheel 2 Remote Controller Stand for power
supply and communication. Ensure the Pogo Pin is clean and in good condition. Do not
cause the Pogo Pin to short-circuit.
Installation
Mounting on Inspire 2 Remote Controller
1. Attach the Focus Handwheel 2 to the Remote Controller Stand mounted on Inspire 2
remote controller (visit the ofcial DJI online store for more information on the DJI Focus
Handwheel 2-Remote Controller Stand).
2. Connect the cable on the Stand to the Inspire 2 Remote controller to power the Focus
Handwheel 2.
EN
6
The DJI Focus Handwheel 2 is compatible with the Inspire 2 only. The Inspire 1 series
is not supported.
Mounting on Osmo Pro/RAW
1. Attach the Focus Handwheel 2 to the Osmo Pro/RAW as shown then tighten the screw.
2. Connect the Communication Port on the Focus Handwheel 2 to the Osmo Pro/RAW for
power supply and communication using the dedicated Focus Handwheel 2-Osmo Pro/
RAW communication cable (not included, visit the official DJI online store for more
information). Ensure the cable's orientation is correct before plugging into the ports.
Mounting on other Devices
The Rosette Mount on the DJI Handwheel 2 provides
two mounting dimensions: 1/4” and 3/8”. If mounting the
Handwheel 2 on other devices with 3/8” port, remove the
screw in the Rosette Mount as shown.
EN
7
Status LED Description
The status LED indicates the communication status after the Focus Handwheel 2 is powered
on. Refer to the table below for more information about the blinking patterns.
Blinking Patterns Description
Blinks quickly Upgrade failed.
Blinks slowly No device detected.
Solid on Working properly.
Settings
Setting Mechanical Limits
The two adjustable hard stop screws around the focus wheel can be used to limit the travel
range physically.
1. Loosen the hard stop screws, slide them to the desired positions and tighten.
2. The travel range of the focus wheel is now limited to the distance between the two hard
stop screws.
Adjusting the Stiffness
Turn the control knob at the center while holding the focus wheel to adjust the stiffness of the
wheel. Adjust the focus wheel until it reaches a stiffness or looseness that feels comfortable.
EN
8
The rotation direction of the Focus wheel can be reversed in the DJI GO
TM
/DJI GO 4 app.
Travel Range Settings
Travel range settings are only available in the focus control mode.
1. Turn the focus wheel to the desired upper travel limit and press the lens button once.
2. Turn the focus wheel to the desired lower travel limit and press the lens button once.
Turning the focus wheel a full cycle will now rotate the lens between the two travel limits.
3. Press the lens button again to reset.
Switch Control Mode
1. Press and hold the lens button to switch between focus, aperture and zoom control.
2. Focus, aperture or zoom control can be switched in the DJI GO/DJI GO 4 app.
Calibration
Only calibrate the Focus Handwheel when you feel lens control is not optimal.
How to Calibrate: Within the rst ve seconds after powering on, rotate the Focus wheel back
and forth across its full travel range four times.
EN
9
This content is subject to change.
Download the latest version from
http://www.dji.com/focus
Update Firmware
The Focus Handwheel 2 can be upgraded through the Inspire 2 remote controller and Osmo
Pro/RAW. Refer to the Inspire 2 user manual or the Osmo Pro/RAW upgrade guide for details.
Specications
Model FH02
Weight 340g
Dimensions 86 (diameter)×68 (height) mm
Operating Temperature -4°to 131°F (-20℃ to 55℃)
Operating Voltage 5V-12V
Operating Current 0.03A-0.072A
Power 0.36W
76
Compliance Informatron
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
EU Compliance Statement
SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of the EMC Directive.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-
compliance
EU-Compliance
Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den wesentlichen
Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie EMC
entspricht.
Eine Kopie der EU-Konformitätserklärung finden Sie online auf www.dji.com/euro-
compliance.
Declaración de cumplimiento UE
SZ DJI TECHNOLOGY CO., LTD. por la presente declara que este dispositivo cumple los
requisitos básicos y el resto de provisiones relevantes de la Directiva EMC.
Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/
euro-compliance
Déclaration de conformité UE
Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet appareil est conforme
aux principales exigences et autres clauses pertinentes de la directive européenne EMC.
Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/
euro-compliance
Dichiarazione di conformità UE
SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente dispositivo è conforme ai
requisiti essenziali e alle altre disposizioni rilevanti della direttiva EMC.
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web
www.dji.com/euro-compliance
78
DJI Support
DJI
技术支持
DJI
技術支援
DJI
サポート
DJI
지원
DJI Support
Servicio de asistencia de DJI
Service client DJI
Assistenza DJI
DJI-ondersteuning
Suporte DJI
Техническая поддержка DJI
http://www.dji.com/support
Printed in China.
中国印制
If you have any questions about this document, please contact
DJI by sending a message to
.
OSMO and INSPIRE are trademarks of DJI.
Copyright © 2017 DJI All Rights Reserved.
如果您对说明书有任何疑问或建议,请通过以下电子邮箱联系我们:
OSMO INSPIRE 是大疆创新的商标
Copyright ©
2017 大疆创新 版权所有
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78

dji Go User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI