Electrolux IK257SZL User manual

Category
Fridges
Type
User manual

This manual is also suitable for

IK25 7SZR
IK25 7SZL
2
22
42
62
62
Description of the appliance
1Operating and control elements
2 Butter and cheese compartment - Vario Box
3 Adjustable door rack
4 Freezer compar tment
5 Sectioned shelf
6 Adjustable shelf
7 NaturaFresh drawer (dry storage climate)
8 NaturaFresh drawer (adjustable humidity)
9 Type plate
Content
Description of the appliance ...................................................62
Disposal notes ........................................................................ 62
Safety instructions and warnings ...........................................63
Range of appliance use ..........................................................63
Climate rating .........................................................................64
Setting up ...............................................................................64
Electrical connection ..............................................................64
Operating and control elements ............................................. 64
Switching the appliance on and o ........................................64
Setting the temperature ..........................................................65
ActionCool .............................................................................. 65
Door open alarm .....................................................................65
Child lock ................................................................................ 65
Interior light ............................................................................. 65
Equipment ..............................................................................66
Cooling ...................................................................................67
Saving energy ........................................................................67
Freezer compartment ............................................................. 67
Freezing..................................................................................67
Making ice cubes ...................................................................67
Defrosting ...............................................................................68
Cleaning .................................................................................68
Malfunctions ...........................................................................68
Shutting your appliance down ................................................68
Supplied accessories .............................................................69
Changing over door hinges ....................................................70
Limiting the door opening angle to 90° ...................................73
Installation options .................................................................73
Door panel design .................................................................. 74
Appliance dimensions ............................................................ 74
Installation dimensions ...........................................................75
Appliance venting ...................................................................75
Installing the appliance ...........................................................76
Disposal notes
The appliance contains reusable materials and should
be disposed of properly - not simply with unsorted
household refuse. Appliances which are no longer
needed must be disposed of in a professional and
appropriate way, in accordance with the current local
regulations and laws.
When disposing of the appliance, ensure that the refrigerant circuit
is not damaged to prevent uncontrolled escape of the refrigerant
it contains (data on type plate) and oil.
Disable the appliance.
Pull out the mains plug.
Cut through the connection cable.
WARNING
Danger of suffocation due to packing material
and plastic film!
Do not allow children to play with packaging
material.
Take the packaging material to an official collec-
tion point.
63
GB
Range of appliance use
The appliance is suitable solely for cooling food
in a domestic environment or similar.
This includes, for example, use
- in staff kitchenettes, bed and breakfast establish-
ments,
- by guests in cottages, hotels, motels and other
forms of accommodation,
- in catering and similar services in the wholesale
trade.
Use the appliance solely as is customary within a domestic en-
vironment. All other types of use are inadmissible.
The appliance is not suitable for storing and cooling medicines,
blood plasma, laboratory preparations or similar substances and
products covered by the 2007/47/EC Medical Devices Directive.
Any misuse of the appliance may result in damage to or spoilage
of stored goods.
Furthermore, the appliance is not suitable for operation in poten-
tially explosive atmospheres.
Safety instructions and warnings
To prevent injury or damage to the unit, the ap-
pliance should be unpacked and set up by two
people.
In the event that the appliance is damaged on
delivery, contact the supplier immediately before
connecting to the mains.
To guarantee safe operation, ensure that the ap-
pliance is set up and connected as described in
these operating instructions.
Disconnect the appliance from the mains if any
fault occurs. Pull out the plug, switch off or remove
the fuse.
When disconnecting the appliance, pull on the
plug, not on the cable.
Any repairs and work on the appliance should
only be carried out by the customer service
department, as unauthorised work could prove
highly dangerous for the user. The same applies
to changing the mains power cable.
Do not allow naked flames or ignition sources
to enter the appliance. When transporting and
cleaning the appliance, ensure that the refrigerant
circuit is not damaged. In the event of damage,
make sure that there are no ignition sources
nearby and keep the room well ventilated.
Do not stand on the plinth, drawers or doors or
use them to support anything else.
This appliance can be used by children of 8 years
old and over, and also by persons with restricted
physical, sensory or mental capacity or lack of
experience and knowledge, if they are supervised
or have been instructed on safe use of the appli-
ance and understand the resulting risks. Children
must not be allowed to play with the appliance.
Cleaning and user maintenance must not be
carried out by children without supervision.
Avoid prolonged skin contact with cold surfaces
or chilled/frozen food. This could cause pain,
numbness and frostbite. In the case of prolonged
skin contact, protective measures should be
taken, e.g. gloves should be worn.
Do not eat ice cream, particulary ice lollies or ice
cubes, immediately after taking them from the
freezer compartment as there is a risk of "burn-
ing" because of the very cold temperatures.
Do not consume food which has been stored for
too long, as it could cause food poisoning.
Do not store explosives or sprays using com-
bustible propellants such as butane, propane,
pentane, etc. in the appliance. Electrical com-
ponents might cause leaking gas to ignite. You
may identify such sprays by the printed contents
or a flame symbol.
Do not use electrical appliances inside the ap-
pliance.
The LED light strip illuminates the interior of the
appliance. It is not suitable for lighting a room.
64
Switching the appliance on and o
Switching the appliance on
Press the On/Off button until the temperature display
lights up.
Switching the appliance o
Keep the On/Off button pressed for approx. 3 seconds so that
the temperature display goes out.
1 Temperature display (display)
2 Temperature setting buttons
3 On/O button
4 Action Cool button (the Action Cool button switches the refrig-
erator compartment to maximum cooling)
5Audible warning on/o button
Symbols in the display
Setup mode is activated (activating the child lock)
Child lock is activated
Symbol ActionCool on
Demo mode is activated
Operating and control elements
The electronic control panel features the "touch capacitance
technology".
Any function can be activated by touching the corresponding icon.
Climate rating
The climate rating indicates the room
temperature at which the appliance may
be operated in order to achieve full refrig-
eration performance.
The climate rating is indicated on the
type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
Climate rating Room temperature
SN-T +10°C to +43°C
Do not operate the appliance outside the
specified room temperature range.
Setting up
Standard EN 378 specifies that the room in which you install
your appliance must have a volume of 1 m
3
per 8 g of R 600a
refrigerant used in the appliance, so as to avoid the formation
of inflammable gas/air mixtures in the room
where the appliance is located in the event
of a leak in the refrigerant circuit. The quan-
tity of refrigerant used in your appliance is
indicated on the type plate on the inside of
the appliance.
Only use the appliance when it is installed.
Do not cover ventilation openings
or grille.
Electrical connection
Only operate the appliance with alternating current (AC).
The permissible voltage and frequency are indicated on the type
plate. The position of the type plate is shown in the section entitled
Description of the appliance.
The socket must be properly earthed and protected by a fuse.
The tripping current of the fuse must be between 10 A and 16 A.
The socket must not be situated behind the appli-
ance and must be easily accessible.
Do not connect the appliance using an exten-
sion cable or extension socket.
Do not use stand-alone inverters (conversion
of direct current to alternating current/three-
phase current) or energy-saving plugs. Risk
of damage to the electronic control system!
Removing the transportation
safety component
65
GB
ActionCool
By activating the ActionCool function, the temperature in the
refrigerator compartment will drop to its lowest value. It is recom-
mended if large quantities of food are to be cooled rapidly.
Switching on
Press the ActionCool button.
The symbol
appears in the display.
Note
The ActionCool function switches off automatically after about
6 hours, but can be switched off earlier.
Switching o
Press the ActionCool button.
The symbol
goes dark.
Child lock
The child lock is designed to protect the appliance from being
switched off accidentally.
Activating the child lock
Press for 5 seconds. >> Display =
Display =
Display =
Display =
The child lock is activated.
Deactivating the child lock
Press for 5 seconds. >> Display =
Display =
Display =
Display =
The child lock is deactivated.
Setting the temperature
Increasing the temperature
Press the + button.
Reducing the temperature
Press the - button.
- When pressing one of the buttons for the first time, the display
will start to flash.
- Pressing this button again enables you to change the tempera-
ture setting.
Recommended temperature setting: 5°C. An average tem-
perature of approx. -18 °C is then established in the freezer
compartment.
- The electronic control system will switch over automatically
about 5 seconds after the last time you pressed the button, and
the actual temperature will be displayed.
If F0 to F9 appears in the display, the appliance has a fault. In this
case, contact the customer service department.
Door open alarm
If the door is left open for more than 60 seconds, the audible
warning signal will sound.
If the door must be opened for a lengthy period to place
items into the appliance, cancel the audible warning
signal by pressing the alarm button.
The alarm switches back to standby when the door is shut.
66
Equipment
You can re-arrange the storage
shelves as required.
Lift the glass shelf, align the recess
over the support and replace the
shelf in a higher or lower position.
Sectioned shelf
If you need to make space for
tall containers, simply slide
the front half of the sectioned
glass shelf carefully under-
neath the back half.
Repositioning the door racks
Lift door rack vertically, lift out to the front and
re-insert at a different height, following these
steps in the reverse order.
Adjusting the insertion
height of the sectioned
shelf
Remove the supporting strips
and place on the supports
above or below the previous
position.
Interior light
The interior light will always switch on when
the appliance door is opened.
The light intensity of the LED light cor-
responds to laser class 1/1M.
Important
The light cover may only be removed
by customer service staff.
If the cover is removed, do not look
directly at the light through optical
lenses from close distance. This can
damage your eyes.
Removing the NaturaFresh
drawers
Pull the drawer out as far as it will go,
lift slightly at the back and remove.
Inserting the NaturaFresh
drawers
Extend the pull-out rails as far as they
will go. Place the drawer on the rails
and slide it right in.
Removing the humidity
adjusting plate
Pull plate to the front and
remove downwards.
Inserting the humidity
adjusting plate
Fit plate from underneath and
push backwards.
67
GB
Cooling
Storage example
1 butter, cheese
2 eggs, cans, tubes
3 bottles
4 frozen food, ice cubes
5 baked goods, pre-cooked meals,
drinks
6 meat, sausage products, dairy
products
7 salad, fruit, vegetables, fresh herbs
8 meat, sausage products, fish,
dairy products
9 salad, fruit, vegetables
Note
Food which gives off or absorbs
odours and flavours as well as liquids
should always be stored covered or
in closed containers.
High- percentage alcohols should be tightly sealed and stored
upright.
NaturaFresh
The NaturaFresh compartment enables you to keep a range of fresh
food fresh for up to 3 times longer than usual whilst maintaining
the same quality as with conventional refrigerators.
The automatically controlled storage temperature, which is kept
constantly at just above 0°C, and the resultant humidity provide
the ideal storage conditions for different types of food.
The NaturaFresh compartment satisfies the requirements of a
chill compartment to EN ISO 15502.
The top drawer 8
is suitable for storing dry or wrapped food (e.g. dairy products,
meat, fish, cold meats). The storage
climate in this drawer is relatively
dry.
The drawer with humidity
control 9
When set to "humid", this drawer
can be used for storing salad,
vegetables and fruit. When the
drawer is full, the climate will be
"dew-fresh", with approximately
90% humidity.
You can set the humidity in this
drawer to dry or moist as required.
Humidity selection:
"dry" setting: small humidity
symbol - slide control to left.
Insert food that is suitable for
being stored in a dry climate.
"humid" setting: high relative
humidity of max. 90%, large
humidity symbol - slide control
to right. This setting is suitable
for storing unwrapped food with
a high moisture content such as
fresh lettuce.
Notes
Unwrapped animal and vegetable foods should be stored
separately in the drawers. If there is not enough space for them
to be stored separately, make sure that they are wrapped.
Do not allow different types of meat to come into contact with
one another but keep them packaged separately so as to avoid
premature bacterial spoilage.
The following products should not be stored in the NaturaFresh
compartment: hard cheese, potatoes, cold-sensitive vegetables
such as cucumber, aubergines, avocados, semi-ripe tomatoes,
zucchini, and all cold-sensitive tropical fruits such as pineapple,
bananas, grapefruit, melons, mangoes, papaya, etc.
Saving energy
- Always ensure good ventilation. Do not cover ventilation open-
ings or grille.
- Do not place the appliance in areas of direct sunlight or next to
a cooker, radiator or similar object.
- The energy consumption depends on the installation conditions,
e.g. the ambient temperature.
- Keep the time the appliance is open to a minimum.
- Store food logically.
- First cool warm food to room temperature before storing it.
- Defrost frozen food in the refrigerator.
Freezer compartment
- Ensure that all food is well packed and covered for storage. This
will prevent frost from forming.
- If there is a thick layer of frost in the appliance: defrost the ap-
pliance.
68
Adjusting the temperature in the NaturaFresh com-
partment
The temperature is controlled automatically between 0°C and 3°C.
The temperature can be adjusted from b1 (coldest temperature
setting) to b9 (warmest temperature setting).
The presetting is b5.
Important
At the b1 to b4 settings the temperature may drop below 0°C and
therefore the food may freeze slightly.
Press
for 5 seconds. >>Display =
Display =
Display =
Use buttons and to select the desired setting.
Display =
Display =
Making ice cubes
Fill the ice cube tray with water.
Place the ice cube tray in the appliance
and leave it to freeze.
The ice cubes can be removed from the tray by twisting or by
holding upside down for a short time under running water.
Freezer compartment
You can store frozen food for several months, make ice cubes
and freeze fresh food in the freezer compartment at a temperature
of -18°C and lower.
The air temperature in the compartment, measured by thermom-
eter or other instruments, may fluctuate.
Freezing
Fresh food should be frozen to core as quickly as possible.
You can freeze up to 2 kg/24 hours.
Set the temperature to 5°C or lower.
Wait 4 hours.
Place the fresh food in the freezer.
After approx. 24 hours the fresh food will be frozen.
Now set the temperature to the normal setting.
Deep frozen food can be placed into the cold freezer compart-
ment straight away.
CAUTION
Do not freeze bottles and cans of drinks. They
can burst during the freezing process.
Notes on freezing
Pack frozen food in standard freezer bags or reuseable plastic,
metal or aluminium containers.
Always write the date and contents on the pack and do not
exceed the stated storage time for the food.
Only take out as much food as is immediately required for
thawing. Use food which has been thawed in prepared meals
as quickly as possible.
Frozen food can be thawed in the following ways:
- in a fan oven
- in a microwave oven
- at room temperature
- in the refrigerator
69
GB
Cleaning
Before cleaning, always switch off the appliance. Discon-
nect from the mains or switch off the fuse!
Clean the inside and equipment with lukewarm water and a
little detergent. Do not use chemical solvents or any cleaning
agents containing sand or acid.
Ensure that no cleaning water penetrates into the electrical
components or ventilation grille.
Dry all parts well with a cloth.
Do not damage or remove the type plate on the inside of the
appliance. It is very important for servicing purposes.
CAUTION
Risk of damage to the appliance components
and risk of injury due to hot steam.
Do not use steam cleaning equipment to clean
the appliance.
Malfunctions
F0, F1, F2, F3, F4, F5, F6, F7, F8 or F9 appears in the display.
The appliance has suffered a fault.
Contact the customer service department.
When inserting the mains plug, the refrigeration unit does
not switch on, but a value is shown in the temperature
display.
Demo mode is activated.
Contact the customer service department.
You may be able to rectify the following faults by checking
the possible causes yourself:
Appliance does not function:
Is the appliance switched on?
Is the plug correctly fitted in the mains socket?
Is the fuse intact?
Loud running noise:
Is the appliance set up firmly on the floor?
Does the appliance cause nearby items of furniture or objects
to vibrate? Please note that noises caused by the refrigerant
circuit cannot be avoided.
The temperature is not low enough:
Is the temperature setting correct (see "Setting the tempera-
ture")?
Does the separately installed thermometer show the correct
reading?
Is the ventilation system working properly?
Is the appliance set up too close to a heat source?
If none of the above causes apply
and you cannot rectify the fault
yourself, contact the nearest
customer service department
stating the type designation
1,
PNC number
2 and appliance
number
3 as indicated on the
type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch
it off and disconnect the plug or switch off or unscrew the fuse.
Clean the appliance and leave the door open in order to prevent
unpleasant smells.
The appliance complies with the relevant safety regulations and
EC Directives 2004/108/EC and 2006/95/EC.
Defrosting
The refrigerator compartment defrosts automatically.
Freezer compartment
After a long period of operation, a layer of frost or ice can build up
on the walls of the freezer compartment. This increases energy
consumption.
Pull out the plug or switch off the fuse!
Wrap the frozen food in paper or blankets and store in a cool
place.
Leave the appliance door and the freezer compartment door
open when defrosting.
After a defrosting time of approx. 20 minutes, the layer of frost
or ice can be detached from the interior container by hand and
removed.
After defrosting, mop up the remaining water and clean the
appliance.
CAUTION
Risk of damage to the refrigerant circuit and
flammability hazard due to leaking refrigerant.
Do not use any mechanical devices or other
artificial aids for defrosting other than those
recommended by the manufactur er.
70
Supplied accessories
Cover profile (covers the gap between
the top of the appliance and the recess)
Covers
Installation on the left at the top for right-hand
hinged door.
Installation on the right at the top for left-hand
hinged door.
Cover
Installation on the left at the bottom for right-hand
hinged door.
Installation on the right at the bottom for left-hand
hinged door.
Covers for openings in the interior container in the
freezer compartment area
These parts are required if the appliance door
hinges are changed over.
Cover
Installation on the right at the top for right-hand
hinged door.
Installation on the left at the top for left-hand
hinged door.
Side cover for the door panel
retaining bracket
Top cover for the door panel retaining
bracket
Pin to restrict the hinge opening angle
to 90°
Angle bracket
To connect the appliance door and the
door panel.
Cover for the angle brackets.
2 pcs.
Angle bracket
To connect the appliance door and the
door panel.
2 pcs.
Retaining plate
To connect the appliance door and the
door panel.
2 pcs.
2 pcs.
2 pcs.
4 pcs.
4 pcs.
12 pcs.
8 pcs.
2 pcs.
Ring spanner
Note
The accessory pack contains all necessary components for an
entire range of appliances. Parts may therefore be left over after
installation, depending on the appliance type.
71
GB
Changing over door hinges
Door hinges should only be changed by a trained expert.
Changing the door hinges must be done by two people.
6.
Important
The door must now be held secure by somebody.
5.
5. Remove screws.
Remove door.
6. Transfer the bottom attach-
ment bracket.
Note
Screw in the screws, push the bracket to the left as
far as it will go, then tighten the screws.
7. Unscrew the top attachment
bracket.
7.
1.
2.
1. Remove cover.
2. Pull soft stop mechanism downwards.
The soft stop mechanism will then
contract.
3. Unscrew soft stop mechanism.
3.
4. Transfer ball stud to the opposite
side.
4.
72
8.
9.
8. Remove the retaining bracket and
transfer to the opposite side.
9. Screw on the top attachment bracket.
Note
Screw in the screws, push the bracket to the left as
far as it will go, then tighten the screws.
Changing over the hinges of the freezer compartment
door
10. Tilt lower part of the bracket down-
wards.
11. Remove screw.
Remove the compartment door with
the bracket downwards.
10.
11.
12. Transfer door latch.
13. Close the openings with the covers (supplied in
the accessory pack).
12.
13.
14. Transfer bracket to the opposite side.
15. Turn the compartment door through 18.
14.
15.
16. Insert the compartment door in the top left door mounting.
17. Screw on bracket.
18. Close lower part of the bracket.
16.
17.
18.
73
GB
19. Unscrew hinges and re-fit on the opposite
side at diagonals to the original position.
19.
20.
21.
20. Screw on door.
21. Click cover into place.
22. Screw on soft stop mechanism.
22.
23.
23. Extend the soft stop mechanism,
push it onto the ball stud and click
into place.
74
Limiting the door opening
angle to 90°
If necessary, limit the maximum door
opening angle to 9.
Fully insert pins (enclosed in the
accessory pack) in each hinge
in the opening shown.
Open the door to just under 9.
Important
The pins must be inserted before the appliance is
installed in the recess.
It is not possible to insert the top pin once the appli-
ance has been installed.
Installation options
External door panel
The door panel rests on
the panels of the unit.
Internal door panel
The door panel fits inside the body of
the unit. The front of the unit is visible.
Door panel design
Maximum panel weight = 19 kg
Dimensions of external door
panel
A = recess height plus overlapping of
the panel at the top and bottom
B = max. 562 mm
C = min. 16 mm
max. 19 mm
Dimensions of internal door
panel
A = max. 1518 mm
B = max. 544 mm
C = min. 16 mm
max. 19 mm
75
GB
Installation dimensions
In this area, the power cord comes out of the appliance rear.
Free length of the power cord = 2000 mm
Choose the position of the socket considering these specifications.
The socket must not be situated behind the appli-
ance and must be easily accessible.
Important
In order to avoid any problems when installing the appliance and
to avoid damage to the appliance, the following conditions must
be complied with.
The kitchen unit must be aligned horizontally and
vertically.
Minimum wall thickness of the body of the unit = 16 mm.
Important
The minimum recess depth of 575 mm applies to the
installation option with external door panel.
In the case of the installation option with internal
door panel, the panel thickness must be added to
the 575 mm.
Appliance dimensions
Side view
View from above
Maximum door
opening angle
76
Appliance venting
Important
The clear ventilation cross-
section must be at least
200 cm² from the lower ven-
tilation opening right to the
upper one.
Types of air outlet
1 Directly above the appliance
2 Above the top unit
3 From the front of the top unit with decor grille
Important
When using decor grilles, it must be taken into account
that the clear ventilation cross-section corresponds
to the sum of the individual openings in the grille.
A cut-out section of merely 200 cm² for installing the
ventilation grille is thus not sucient.
Installing the appliance
1.
Fit cover profile.
On appliances with
hinges on the right
On appliances with
hinges on the left
2.
Slide the appliance into the recess.
Route the mains cable towards the
socket.
When sliding in the appliance, make sure
that the mains cable is not damaged.
Installation option with external door panel
A = max. 43 mm
Installation option with internal door panel
A = 43 mm + panel thickness
1.
2.
77
GB
5.
3.
Secure the appliance through the hinges using
two 4 x 17 screws per hinge.
4.
Undo the screws 1.
Slide bracket towards the unit wall.
Tighten the screws
1.
Screw in the screws
2 (4 x 17).
3.
3.
4.
5.
Remove mounting strips, insert in the
adjacent openings and push
downwards as far as they will go.
Close the door.
6.
Push the mounting strips upwards.
The bottom edge of the mounting strips must be aligned with the
top edge of the adjacent unit door.
Installation option with internal door panel
6.
6.
Installation option with external door panel
78
Important
When removing, ensure that the mounting strips do
not move.
7.
Open the door.
Unscrew the retaining bracket with
the mounting strips.
To do so, use the ring
spanner provided.
7.
8.
10.
9.
10.
A = 1190 mm
8.
Position the retaining bracket in the middle of the door panel and
secure to the door panel using six 4 x 15 screws.
9.
Slide the cover onto the retain-
ing bracket from the side.
10.
Attach the retaining plates to the door panel using three 4 x 15
screws per plate.
Important
Fit the unit handle to the panel at this stage.
11.
11.
Remove the mounting strips and insert in the
adjacent openings.
12.
12.
Pull soft stop mechanism downwards.
The soft stop mechanism will then
contract.
13.
Pivot soft stop mechanism to the left.
13.
79
GB
15.
15.
Place the door panel on the adjusting screws and align in the centre.
Screw the nuts onto the adjusting screws and tighten.
To do so, use the ring spanner provided.
16.
Close the door and check the position
of the door panel.
16.
14.
Screw the angle brackets onto the underside of the door using
4 x 15 screws.
Push the bracket to the back as far
as it will go, then tighten the screw.
21.
21.
22.
18.
17.
17.
20.
20.
19.
Aligning the door panel
17.
Undo the nuts.
18.
Align the door panel vertically by
turning the adjusting screws.
Use a Torx 15 screwdriver (not supplied in the
accessory pack).
19.
Align the door horizontally.
20.
Tighten the nuts.
21.
Undo the screws.
22.
Adjust the depth of the door panel.
Tighten the screws.
80
23.
Screw the bottom of the door onto the door panel (4 x 15 screws).
23.
24.
Undo the angle bracket screws on
the underside of the door.
Adjust the depth of the panel.
Tighten the screws.
Fit the cover to the outer angle
bracket.
Note
Do not fit a cover to the inner angle
bracket. This is the area where the
soft stop mechanism is located.
24.
Important
Align external door panels so that
there is a gap of approx. 2 mm be-
tween the door panel and the body
of the unit.
This will ensure that the door seal
closes properly.
25.
Schließdämpfer auseinanderziehen, auf
den Kugelbolzen drücken und einrasten.
25.
26.
26.
27.
27.
27.
Fit cover caps.
26.
Insert the angle brackets
behind the retaining plates and
secure using two 3.5 x 11 screws per
bracket.
Important
Slide the angle bracket to the left, then tighten the
screws.
The angle bracket must be in contact with the
retaining plate.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

Electrolux IK257SZL User manual

Category
Fridges
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI