Electrolux IK141SL A User manual

IK141S R

IK141S L

2

18

34

50

Page is loading ...

50

Description of the appliance

1Operating and control elements

2 Butter and cheese compartment

3Adjustable door rack

4 Bottle rack

5 Freezer compartment

6Sectioned shelf

7 Adjustable shelf

8 Vegetable drawer

9 Type plate

Disposal notes

The appliance contains reusable materials and should

be disposed of properly - not simply with unsorted

household refuse. Appliances which are no longer

needed must be disposed of in a professional and

appropriate way, in accordance with the current local

regulations and laws.

When disposing of the appliance, ensure that the refrigerant circuit

is not damaged to prevent uncontrolled escape of the refrigerant

it contains (data on type plate) and oil.

•Disabletheappliance.

• Pulloutthemainsplug.

•Cutthroughtheconnectioncable.

WARNING

Danger of suffocation due to packing material

and plastic film!

Do not allow children to play with packaging

material.

Take the packaging material to an official collec-

tion point.

Content

Description of the appliance ...................................................50

Disposal notes ........................................................................ 50

Safety instructions and warnings ...........................................51

Range of appliance use ..........................................................51

Climate rating .........................................................................52

Setting up ...............................................................................52

Electrical connection .............................................................. 52

Operating and control elements ............................................. 52

Switchingtheapplianceonando ........................................52

Setting the temperature ..........................................................52

ActionCool .............................................................................. 53

Child lock ................................................................................ 53

Equipment ..............................................................................53

Interior light ............................................................................. 53

Cooling ...................................................................................54

Saving energy ........................................................................54

Freezer compartment .............................................................54

Freezing..................................................................................54

Making ice cubes ...................................................................54

Defrosting ...............................................................................55

Cleaning .................................................................................55

Malfunctions ........................................................................... 55

Shutting your appliance down ................................................55

Supplied accessories .............................................................56

Changing over door hinges ....................................................57

Adjusting the resilience of the hinges .....................................59

Installation options .................................................................59

Appliance dimensions ............................................................60

Installation dimensions ........................................................... 60

Appliance venting ...................................................................61

Door panel design ..................................................................61

Limitingthedooropeningangleto90° ...................................61

Installing the appliance ...........................................................62

51

GB

Range of appliance use

The appliance is suitable solely for cooling food

in a domestic environment or similar.

Thisincludes,forexample,use

- in staff kitchenettes, bed and breakfast establish-

ments,

- by guests in cottages, hotels, motels and other

forms of accommodation,

- in catering and similar services in the wholesale

trade.

Usetheappliancesolelyasiscustomarywithinadomesticen-

vironment. All other types of use are inadmissible.

The appliance is not suitable for storing and cooling medicines,

blood plasma, laboratory preparations or similar substances and

productscoveredbythe2007/47/ECMedicalDevicesDirective.

Any misuse of the appliance may result in damage to or spoilage

of stored goods.

Furthermore, the appliance is not suitable for operation in poten-

tiallyexplosiveatmospheres.

Safety instructions and warnings

•Topreventinjuryordamagetotheunit,theap-

pliance should be unpacked and set up by two

people.

•Intheeventthattheapplianceisdamagedon

delivery, contact the supplier immediately before

connecting to the mains.

•Toguaranteesafeoperation,ensurethattheap-

pliance is set up and connected as described in

these operating instructions.

•Disconnecttheappliancefromthemainsifany

faultoccurs.Pullouttheplug,switchofforremove

the fuse.

•Whendisconnectingtheappliance,pullonthe

plug, not on the cable.

•Anyrepairsandworkontheapplianceshould

only be carried out by the customer service

department, as unauthorised work could prove

highly dangerous for the user. The same applies

to changing the mains power cable.

•Donotallownakedflamesorignitionsources

to enter the appliance. When transporting and

cleaning the appliance, ensure that the refrigerant

circuit is not damaged. In the event of damage,

make sure that there are no ignition sources

nearby and keep the room well ventilated.

•Donotstandontheplinth,drawersordoorsor

use them to support anything else.

•Thisappliancecanbeusedbychildrenof8years

old and over, and also by persons with restricted

physical, sensory or mental capacity or lack of

experienceandknowledge,iftheyaresupervised

or have been instructed on safe use of the appli-

ance and understand the resulting risks. Children

must not be allowed to play with the appliance.

Cleaning and user maintenance must not be

carried out by children without supervision.

•Avoidprolongedskincontactwithcoldsurfaces

or chilled/frozen food. This could cause pain,

numbness and frostbite. In the case of prolonged

skin contact, protective measures should be

taken, e.g. gloves should be worn.

•Donoteaticecream,particularyicelolliesorice

cubes, immediately after taking them from the

freezer compartment as there is a risk of "burn-

ing" because of the very cold temperatures.

•Donotconsumefoodwhichhasbeenstoredfor

too long, as it could cause food poisoning.

•Do notstoreexplosivesor spraysusingcom-

bustible propellants such as butane, propane,

pentane, etc. in the appliance. Electrical com-

ponents might cause leaking gas to ignite. You

may identify such sprays by the printed contents

or a flame symbol.

•Donotuseelectricalappliancesinsidetheap-

pliance.

•Ifyouhavealockableappliance,donotkeepthe

key near the appliance or within reach of children.

•TheLEDlightstripilluminatestheinteriorofthe

appliance. It is not suitable for lighting a room.

52

Climate rating

The climate rating indicates the room

temperature at which the appliance may

be operated in order to achieve full refrig-

eration performance.

The climate rating is indicated on the

type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Climate rating Room temperature

SN-ST +10°Cto+38°C

Do not operate the appliance outside the

specified room temperature range.

Setting up

• StandardEN378specifiesthattheroominwhichyouinstall

your appliance must have a volume of 1 m

3

per8gofR600a

refrigerant used in the appliance, so as to avoid the formation

ofinflammablegas/airmixturesintheroom

where the appliance is located in the event

of a leak in the refrigerant circuit. The quan-

tity of refrigerant used in your appliance is

indicated on the type plate on the inside of

the appliance.

•Onlyusetheappliancewhenitisinstalled.

•

Do not cover ventilation openings

or grille.

Switching the appliance on and o

Switching the appliance on

Pressthe button until the temperature display lights

up.

Switching the appliance o

Keep the buttonpressedforapprox.3secondssothatthe

temperature display goes out.

Operating and control elements

1 Temperature display (display)

2 Temperature setting button

3 On/Obutton

4 Action Cool button (The Action Cool button switches the re-

frigeratorcompartmenttomaximumcooling)

Symbols in the display

Setup mode is activated (activating the child lock)

Child lock is activated

Symbol Action Cool ein

1

23 4

Setting the temperature

Pressthe button,thenextlowertem-

perature value in the temperature display

will light up.

Keep pressing the

button until the de-

sired value is displayed.

Recommendedtemperaturesetting:5°C.

Anaveragetemperatureofapprox.-18°Cisthenestablishedin

the freezer compartment.

After a certain period of operation, the interior temperature will

adjust to the value which has been set.

If F1 or F2 appears in the display, the appliance has suffered

a fault. In this case, contact the customer service department.

Electrical connection

Only operate the appliance with alternating current (AC).

The permissible voltage and frequency are indicated on the type

plate. The position of the type plate is shown in the section entitled

Description of the appliance.

The socket must be properly earthed and protected by a fuse.

Thetrippingcurrentofthefusemustbebetween10Aand16A.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Donotconnecttheapplianceusinganexten-

sioncableorextensionsocket.

Do not use stand-alone inverters (conversion

of direct current to alternating current/three-

phase current) or energy-saving plugs. Risk

of damage to the electronic control system!

Remove all transit supports

53

GB

Child lock

The child lock is designed to protect the appliance from being

switched off accidentally.

Activating the child lock

Press for 5 seconds. Display =

Display =

The child lock is activated.

Deactivating the child lock

Press for 5 seconds. Display =

Display =

The child lock is deactivated.

Equipment

You can re-arrange the storage

shelves as required.

Lift the glass shelf, align the recess

over the support and replace the

shelf in a higher or lower position.

Sectioned shelf

If you need to make space for

tall containers, simply slide

the front half of the sectioned

glass shelf carefully under-

neath the back half.

Repositioning the door racks

Lift door rack vertically, lift out to the front and

re-insert at a different height, following these

steps in the reverse order.

Adjusting the insertion

height of the sectioned

shelf

Remove the supporting strips

and place on the supports

above or below the previous

position.

Interior light

The interior light will always switch on when the appliance door

is opened.

The light intensity of the LED light cor-

responds to laser class 1/1M.

Important

The light cover may only be removed

by customer service staff.

If the cover is removed, do not look

directly at the light through optical

lenses from close distance. This can

damage your eyes.

ActionCool

By activating the ActionCool function, the temperature in the

refrigerator compartment will drop to its lowest value. It is recom-

mended if large quantities of food are to be cooled rapidly.

Switching on

PresstheActionCool button.

The symbol

appears in the display.

Note

The ActionCool function switches off automatically after about

6 hours, but can be switched off earlier.

Switching o

PresstheActionCool button.

The symbol

goes dark.

54

Cooling

Storage example

1 butter, cheese

2 eggs, cans, tubes

3 bottles

4 frozen food, ice cubes

5 baked goods, pre-cooked meals,

drinks

6 meat, sausage products, dairy prod-

ucts

7 salad, fruit, vegetables, fresh herbs

Note

Food which gives off or absorbs odours and flavours as well as

liquids should always be stored covered or in closed containers.

High-percentagealcoholsshouldbetightlysealedandstored

upright.

Saving energy

- Always ensure good ventilation. Do not cover ventilation open-

ings or grille.

- Donotplaceapplianceinareasofdirectsunlightornexttoa

cooker, radiator or similar object.

- The energy consumption depends on the installation conditions,

e.g. the ambient temperature.

- Keep the time the appliance is open to a minimum.

- Store food logically.

- First cool warm food to room temperature before storing it.

- Defrost frozen food in the refrigerator.

Freezer compartment

- Ensure that all food is well packed and covered for storage. This

will prevent frost from forming.

- If there is a thick layer of frost in the appliance: defrost the ap-

pliance.

Freezer compartment

You can store frozen food for several months, make ice cubes

and freeze fresh food in the freezer compartment at a temperature

of-18°Candlower.

The air temperature in the compartment, measured by thermom-

eter or other instruments, may fluctuate.

Making ice cubes

• Fill the ice cube tray with water.

• Placetheicecubetrayintheappliance

and leave it to freeze.

• The ice cubes can be removed from the tray by twisting or by

holding upside down for a short time under running water.

Freezing

Fresh food should be frozen to core as quickly as possible.

You can freeze up to 2 kg/24 hours.

•

Setthetemperatureto5°Corlower.

• Wait4hours.

• Placethefreshfoodinthefreezer.

• Afterapprox.24hoursthefreshfoodwillbefrozen.

• Nowsetthetemperaturetothenormalsetting.

Deep frozen food can be placed into the cold freezer compart-

ment straight away.

CAUTION

Do not freeze bottles and cans of drinks. They

can burst during the freezing process.

Notes on freezing

• Pack frozen food in standard freezer bags or reuseable plastic,

metal or aluminium containers.

• Always writethedateandcontents on thepackand do not

exceedthestatedstoragetimeforthefood.

•Only takeoutas muchfoodas isimmediatelyrequired for

thawing.Usefoodwhichhasbeenthawedinpreparedmeals

as quickly as possible.

Frozen food can be thawed in the following ways:

– in a fan oven

– in a microwave oven

– at room temperature

– in the refrigerator

55

Malfunctions

• F1 or F2 appears in the display.

– The appliance has suffered a fault.

Contact the customer service department.

• When inserting the mains plug, the refrigeration unit does

not switch on, but a value is shown in the temperature

display.

– Demo mode is activated.

Contact the customer service department.

You may be able to rectify the following faults by checking

the possible causes yourself:

• Appliance does not function:

– Is the appliance switched on?

– Is the plug correctly fitted in the mains socket?

– Is the fuse intact?

• Loud running noise:

– Is the appliance set up firmly on the floor?

– Does the appliance cause nearby items of furniture or objects

tovibrate?Pleasenotethatnoisescausedbytherefrigerant

circuit cannot be avoided.

• The temperature is not low enough:

– Is the temperature setting correct (see "Setting the tempera-

ture")?

– Does the separately installed thermometer show the correct

reading?

– Is the ventilation system working properly?

– Is the appliance set up too close to a heat source?

If none of the above causes apply

and you cannot rectify the fault

yourself, contact the nearest

customer service department

stating the type designation

1,

PNCnumber

2 and appliance

number

3 as indicated on the

type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Shutting your appliance down

If your appliance is to be shut down for any length of time, switch

it off and disconnect the plug or switch off or unscrew the fuse.

Clean the appliance and leave the door open in order to prevent

unpleasant smells.

The appliance complies with the relevant safety regulations and

ECdirectives2004/108/ECand2006/95/EC.

Cleaning

Before cleaning, always switch off the appliance. Pull out

the plug or switch off the fuse!

•Cleantheinside,equipmentpartsandouterwallswithlukewarm

water and a little detergent. Do not use chemical solvents or

any cleaning agents containing sand or acid.

•Ensurethatno cleaningwaterpenetratesintotheelectrical

components or ventilation grille.

• Dryallpartswellwithacloth.

• Donotdamageorremovethetypeplate

on the inside of the appliance. It is very

important for servicing purposes.

•Cleanthedrainholeintherefrig-

erator compartment with a thin

object, e.g. cotton swab or the like.

CAUTION

Risk of damage to the appliance components

and risk of injury due to hot steam.

Do not use steam cleaning equipment to clean

the appliance.

GB

Defrosting

The refrigerator compartment defrosts automatically.

Freezer compartment

After a long period of operation, a layer of frost or ice can build

up inside the freezer compartment. This increases energy con-

sumption.

• Pull out the plug or switch off the fuse!

• Wrapthefrozenfoodinpaperorblanketsandstoreinacool

place.

•Leavetheappliancedoorandthefreezercompartmentdoor

open when defrosting.

• Afteradefrostingtimeofapprox.20minutes,thelayeroffrost

or ice can be detached from the interior container by hand and

removed.

• Afterdefrosting, mop up theremainingwater andcleanthe

appliance.

CAUTION

Risk of damage to the refrigerant circuit and

flammability hazard due to leaking refrigerant.

Do not use any mechanical devices or other

artificial aids for defrosting other than those

recommended by the manufactur er.

56

Allen key

Note

The accessory pack contains all necessary components for an

entirerangeofappliances.Partsmaythereforebeleftoverafter

installation, depending on the appliance type.

Supplied accessories

Cover profile (covers the gap between

the top of the appliance and the recess)

Covers

Installation on the left at the top for right-hand

hinged door.

Installation on the right at the top for left-hand

hinged door.

Cover

Installation on the left at the bottom for right-hand

hinged door.

Installation on the right at the bottom for left-hand

hinged door.

Covers for openings in the interior container in the

freezer compartment area

These parts are required if the appliance door

hinges are changed over.

Cover

Installation on the right at the top for right-hand

hinged door.

Installation on the left at the top for left-hand

hinged door.

Side cover for the door panel

retaining bracket

Top cover for the door panel retaining

bracket

Pintorestrictthehingeopeningangle

to90°

Angle bracket

To connect the appliance door and the

door panel.

Cover for the angle brackets.

2 pcs.

Angle bracket

To connect the appliance door and the

door panel.

2 pcs.

Retaining plate

To connect the appliance door and the

door panel.

2 pcs.

4 pcs.

12 pcs.

8 pcs.

2 pcs.

Ring spanner

57

GB

Changing over door hinges

Doorhingesshouldonlybechangedbyatrainedexpert.

Changing the door hinges must be done by two people.

1.

Important

The door must now be held secure by somebody.

1. Remove cover.

2.

2. Remove screws.

Remove door.

3. Transfer the bottom attach-

ment bracket.

3.

Note

Screw in the screws, push the bracket to the left as

far as it will go, then tighten the screws.

4.Unscrew the top attachment

bracket.

5. Remove the upper retaining bracket

and transfer to the opposite side.

5.

4.

58

Changing over the hinges of the freezer compartment

door

7. Tilt lower part of the bracket down-

wards.

8. Remove screw.

Remove the compartment door with

the bracket downwards.

7.

8.

9. Transfer door latch.

10. Close the openings with the covers (supplied in

the accessory pack).

9.

10.

13. Insert the compartment door in the top left door mounting.

14. Screw on bracket.

15. Close lower part of the bracket.

11. Transfer bracket to the opposite side.

12. Turnthecompartmentdoorthrough180°.

11.

12.

13.

14.

15.

6. Screw on the top attachment bracket.

Note

Screw in the screws, push the bracket to the left as

far as it will go, then tighten the screws.

6.

59

GB

18.

16. Unscrewhingesandre-fitontheoppositesideatdiagonals

to the original position.

18. Click cover into place.

16.

Installation options

External door panel

The door panel rests on

the panels of the unit.

Internal door panel

The door panel fits inside the

body of the unit. The front of

the unit is visible.

The opening resilience of the door can

be adjusted.

- Turn clockwise for stronger resilience.

- Turn anticlockwise for weaker resilience

(factory setting).

Adjusting the resilience of the hinges

17.

17. Screw on door.

60

Installation dimensionsAppliance dimensions

In this area, the power cord comes out of the appliance rear.

Free length of the power cord = 2000 mm

Choose the position of the socket considering these specifications.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Side view

View from above

Important

In order to avoid any problems when installing the appliance and

to avoid damage to the appliance, the following conditions must

be complied with.

The kitchen unit must be aligned horizontally and

vertically.

Minimum wall thickness of the body of the unit = 16 mm.

Maximumdoor

opening angle

Important

The minimum recess depth of 575 mm applies to the

installation option with external door panel.

In the case of the installation option with internal

door panel, the panel thickness must be added to

the 575 mm.

61

GB

Appliance venting

Important

The clear ventilation cross-

section must be at least

200 cm² from the lower ven-

tilation opening right to the

upper one.

Types of air outlet

1 Directly above the appliance

2 Above the top unit

3 From the front of the top unit with decor grille

Important

When using decor grilles, it must be taken into account

that the clear ventilation cross-section corresponds

to the sum of the individual openings in the grille.

A cut-out section of merely 200 cm² for installing the

ventilation grille is thus not sucient.

Door panel design

Maximumpanelweight=15 kg

Dimensions of external door

panel

A = recess height plus overlapping of

the panel at the top and bottom

B=max.562mm

C = min. 16 mm

 max.19mm

Dimensions of internal door

panel

A=max.883mm

B=max.544mm

C = min. 16 mm

 max.19mm

Limiting the door opening

angle to 90°

If necessary, limit the maximum door

openingangleto90°.

Fully insert pins (enclosed in the

accessory pack) in each hinge

in the opening shown.

Openthedoortojustunder90°.

Important

The pins must be inserted before the appliance is

installed in the recess.

It is not possible to insert the top pin once the appli-

ance has been installed.

62

Installing the appliance

1.

Fit cover profile.

On appliances with

hinges on the right

On appliances with

hinges on the left

3.

Secure the appliance through the hinges using

two4x17screwsperhinge.

4.

• Undothescrews1.

•Slidebrackettowardstheunitwall.

• Tightenthescrews

1.

• Screwinthescrews

2(4x17).

Installation option with external door panel

A=max.43mm

Installation option with internal door panel

A=43mm+panelthickness

2.

Slide the appliance into the recess.

Route the mains cable towards the

socket.

When sliding in the appliance, make

sure that the mains cable is not dam-

aged.

2.

63

GB

5.

Remove mounting strips, insert in the

adjacent openings and push

downwards as far as they will go.

Close the door.

6.

Pushthemountingstripsupwards.

The bottom edge of the mounting strips must be aligned with the

top edge of the adjacent unit door.

Installation option with internal door panel

Important

When removing, ensure that the mounting strips do

not move.

6.

Installation option with external door panel

8.

10.

9.

8.

Positiontheretainingbracketinthemiddleofthedoorpaneland

securetothedoorpanelusingsix4x15screws.

10.

Attach the retaining plates to the door

panelusing three 4 x15screwsper

plate.

9.

Slide the cover onto the retain-

ing bracket from the side.

Important

Fit the unit handle to the panel at this stage.

7.

Open the door.

Unscrewtheretainingbracketwiththemounting

strips.

To do so, use the ring spanner

provided.

7.

64

18.

17.

16.

15.

11.

12.

Screw the angle brackets onto the underside of the door using

4x15screws.

Pushthebrackettothebackasfar

as it will go, then tighten the screw.

11.

Remove the mounting strips and insert in the

adjacent openings.

13.

Placethedoorpanelontheadjustingscrewsandaligninthecentre.

Screw the nuts onto the adjusting screws and tighten.

To do so, use the ring spanner provided.

14.

Close the door and check the position of the door panel.

Aligning the door panel

15.

Undothenuts.

16.

Align the door panel vertically by

turning the adjusting screws.

UseaTorx15screwdriver(notsuppliedinthe

accessory pack).

17.

Align the door horizontally.

18.

Tighten the nuts.

19.

20.

19.

Undothescrews.

20.

Adjust the depth of the door panel.

Tighten the screws.

65

GB

Important

Alignexternaldoorpanelssothat

thereisagapofapprox.2mmbe-

tween the door panel and the body

of the unit.

This will ensure that the door seal

closes properly.

21.

Screwthebottomofthedoorontothedoorpanel(4x15screws).

21.

24.

Undotheanglebracketscrewson

the underside of the door.

Adjust the depth of the panel.

Tighten the screws.

Fit the covers to the angle brackets.

22.

23.

Insert the angle brackets

behind the retaining plates and

secureusingtwo3.5x11screwsper

bracket.

Important

Slide the angle bracket to the left, then tighten the screws.

The angle bracket must be in contact with the retaining plate.

24.

Fit cover caps.

25.

Fit cover.

Installation is now complete.

26.

Fit the covers in the following order: 1, 2,

3, 4.

26.

23.

Page is loading ...

Electrolux IK141SL A User manual

This manual is also suitable for

Electrolux IK141SL A User manual

in other languages

Related papers

Other documents