Electrolux IK257SZL A User manual

IK25 7SZR

IK25 7SZL

2

22

42

62

Page is loading ...

62

Description of the appliance

1Operating and control elements

2 Butter and cheese compartment - Vario Box

3 Adjustable door rack

4 Freezer compar tment

5 Sectioned shelf

6 Adjustable shelf

7 NaturaFresh drawer (dry storage climate)

8 NaturaFresh drawer (adjustable humidity)

9 Type plate

Content

Description of the appliance ...................................................62

Disposal notes ........................................................................ 62

Safety instructions and warnings ...........................................63

Range of appliance use ..........................................................63

Climate rating .........................................................................64

Setting up ...............................................................................64

Electrical connection ..............................................................64

Operating and control elements ............................................. 64

Switching the appliance on and o ........................................64

Setting the temperature ..........................................................65

ActionCool .............................................................................. 65

Door open alarm .....................................................................65

Child lock ................................................................................ 65

Interior light ............................................................................. 65

Equipment ..............................................................................66

Cooling ...................................................................................67

Saving energy ........................................................................67

Freezer compartment ............................................................. 67

Freezing..................................................................................67

Making ice cubes ...................................................................67

Defrosting ...............................................................................68

Cleaning .................................................................................68

Malfunctions ...........................................................................68

Shutting your appliance down ................................................68

Supplied accessories .............................................................69

Changing over door hinges ....................................................70

Limiting the door opening angle to 90° ...................................73

Installation options .................................................................73

Door panel design .................................................................. 74

Appliance dimensions ............................................................ 74

Installation dimensions ...........................................................75

Appliance venting ...................................................................75

Installing the appliance ...........................................................76

Disposal notes

The appliance contains reusable materials and should

be disposed of properly - not simply with unsorted

household refuse. Appliances which are no longer

needed must be disposed of in a professional and

appropriate way, in accordance with the current local

regulations and laws.

When disposing of the appliance, ensure that the refrigerant circuit

is not damaged to prevent uncontrolled escape of the refrigerant

it contains (data on type plate) and oil.

• Disable the appliance.

• Pull out the mains plug.

• Cut through the connection cable.

WARNING

Danger of suffocation due to packing material

and plastic film!

Do not allow children to play with packaging

material.

Take the packaging material to an official collec-

tion point.

63

GB

Range of appliance use

The appliance is suitable solely for cooling food

in a domestic environment or similar.

This includes, for example, use

- in staff kitchenettes, bed and breakfast establish-

ments,

- by guests in cottages, hotels, motels and other

forms of accommodation,

- in catering and similar services in the wholesale

trade.

Use the appliance solely as is customary within a domestic en-

vironment. All other types of use are inadmissible.

The appliance is not suitable for storing and cooling medicines,

blood plasma, laboratory preparations or similar substances and

products covered by the 2007/47/EC Medical Devices Directive.

Any misuse of the appliance may result in damage to or spoilage

of stored goods.

Furthermore, the appliance is not suitable for operation in poten-

tially explosive atmospheres.

Safety instructions and warnings

• To prevent injury or damage to the unit, the ap-

pliance should be unpacked and set up by two

people.

• In the event that the appliance is damaged on

delivery, contact the supplier immediately before

connecting to the mains.

• To guarantee safe operation, ensure that the ap-

pliance is set up and connected as described in

these operating instructions.

• Disconnect the appliance from the mains if any

fault occurs. Pull out the plug, switch off or remove

the fuse.

• When disconnecting the appliance, pull on the

plug, not on the cable.

• Any repairs and work on the appliance should

only be carried out by the customer service

department, as unauthorised work could prove

highly dangerous for the user. The same applies

to changing the mains power cable.

• Do not allow naked flames or ignition sources

to enter the appliance. When transporting and

cleaning the appliance, ensure that the refrigerant

circuit is not damaged. In the event of damage,

make sure that there are no ignition sources

nearby and keep the room well ventilated.

• Do not stand on the plinth, drawers or doors or

use them to support anything else.

• This appliance can be used by children of 8 years

old and over, and also by persons with restricted

physical, sensory or mental capacity or lack of

experience and knowledge, if they are supervised

or have been instructed on safe use of the appli-

ance and understand the resulting risks. Children

must not be allowed to play with the appliance.

Cleaning and user maintenance must not be

carried out by children without supervision.

• Avoid prolonged skin contact with cold surfaces

or chilled/frozen food. This could cause pain,

numbness and frostbite. In the case of prolonged

skin contact, protective measures should be

taken, e.g. gloves should be worn.

• Do not eat ice cream, particulary ice lollies or ice

cubes, immediately after taking them from the

freezer compartment as there is a risk of "burn-

ing" because of the very cold temperatures.

• Do not consume food which has been stored for

too long, as it could cause food poisoning.

• Do not store explosives or sprays using com-

bustible propellants such as butane, propane,

pentane, etc. in the appliance. Electrical com-

ponents might cause leaking gas to ignite. You

may identify such sprays by the printed contents

or a flame symbol.

• Do not use electrical appliances inside the ap-

pliance.

• The LED light strip illuminates the interior of the

appliance. It is not suitable for lighting a room.

64

Switching the appliance on and o

Switching the appliance on

Press the On/Off button until the temperature display

lights up.

Switching the appliance o

Keep the On/Off button pressed for approx. 3 seconds so that

the temperature display goes out.

1 Temperature display (display)

2 Temperature setting buttons

3 On/O button

4 Action Cool button (the Action Cool button switches the refrig-

erator compartment to maximum cooling)

5Audible warning on/o button

Symbols in the display

Setup mode is activated (activating the child lock)

Child lock is activated

Symbol ActionCool on

Demo mode is activated

Operating and control elements

The electronic control panel features the "touch capacitance

technology".

Any function can be activated by touching the corresponding icon.

Climate rating

The climate rating indicates the room

temperature at which the appliance may

be operated in order to achieve full refrig-

eration performance.

The climate rating is indicated on the

type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Climate rating Room temperature

SN-T +10°C to +43°C

Do not operate the appliance outside the

specified room temperature range.

Setting up

• Standard EN 378 specifies that the room in which you install

your appliance must have a volume of 1 m

3

per 8 g of R 600a

refrigerant used in the appliance, so as to avoid the formation

of inflammable gas/air mixtures in the room

where the appliance is located in the event

of a leak in the refrigerant circuit. The quan-

tity of refrigerant used in your appliance is

indicated on the type plate on the inside of

the appliance.

• Only use the appliance when it is installed.

•

Do not cover ventilation openings

or grille.

Electrical connection

Only operate the appliance with alternating current (AC).

The permissible voltage and frequency are indicated on the type

plate. The position of the type plate is shown in the section entitled

Description of the appliance.

The socket must be properly earthed and protected by a fuse.

The tripping current of the fuse must be between 10 A and 16 A.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Do not connect the appliance using an exten-

sion cable or extension socket.

Do not use stand-alone inverters (conversion

of direct current to alternating current/three-

phase current) or energy-saving plugs. Risk

of damage to the electronic control system!

Removing the transportation

safety component

65

GB

ActionCool

By activating the ActionCool function, the temperature in the

refrigerator compartment will drop to its lowest value. It is recom-

mended if large quantities of food are to be cooled rapidly.

Switching on

Press the ActionCool button.

The symbol

appears in the display.

Note

The ActionCool function switches off automatically after about

6 hours, but can be switched off earlier.

Switching o

Press the ActionCool button.

The symbol

goes dark.

Child lock

The child lock is designed to protect the appliance from being

switched off accidentally.

Activating the child lock

Press for 5 seconds. >> Display =

Display =

The child lock is activated.

Deactivating the child lock

Press for 5 seconds. >> Display =

Display =

The child lock is deactivated.

Setting the temperature

Increasing the temperature

Press the + button.

Reducing the temperature

Press the - button.

- When pressing one of the buttons for the first time, the display

will start to flash.

- Pressing this button again enables you to change the tempera-

ture setting.

Recommended temperature setting: 5°C. An average tem-

perature of approx. -18 °C is then established in the freezer

compartment.

- The electronic control system will switch over automatically

about 5 seconds after the last time you pressed the button, and

the actual temperature will be displayed.

If F0 to F9 appears in the display, the appliance has a fault. In this

case, contact the customer service department.

Door open alarm

If the door is left open for more than 60 seconds, the audible

warning signal will sound.

If the door must be opened for a lengthy period to place

items into the appliance, cancel the audible warning

signal by pressing the alarm button.

The alarm switches back to standby when the door is shut.

66

Equipment

You can re-arrange the storage

shelves as required.

Lift the glass shelf, align the recess

over the support and replace the

shelf in a higher or lower position.

Sectioned shelf

If you need to make space for

tall containers, simply slide

the front half of the sectioned

glass shelf carefully under-

neath the back half.

Repositioning the door racks

Lift door rack vertically, lift out to the front and

re-insert at a different height, following these

steps in the reverse order.

Adjusting the insertion

height of the sectioned

shelf

Remove the supporting strips

and place on the supports

above or below the previous

position.

Interior light

The interior light will always switch on when

the appliance door is opened.

The light intensity of the LED light cor-

responds to laser class 1/1M.

Important

The light cover may only be removed

by customer service staff.

If the cover is removed, do not look

directly at the light through optical

lenses from close distance. This can

damage your eyes.

Removing the NaturaFresh

drawers

Pull the drawer out as far as it will go,

lift slightly at the back and remove.

Inserting the NaturaFresh

drawers

Extend the pull-out rails as far as they

will go. Place the drawer on the rails

and slide it right in.

Removing the humidity

adjusting plate

Pull plate to the front and

remove downwards.

Inserting the humidity

adjusting plate

Fit plate from underneath and

push backwards.

67

GB

Cooling

Storage example

1 butter, cheese

2 eggs, cans, tubes

3 bottles

4 frozen food, ice cubes

5 baked goods, pre-cooked meals,

drinks

6 meat, sausage products, dairy

products

7 salad, fruit, vegetables, fresh herbs

8 meat, sausage products, fish,

dairy products

9 salad, fruit, vegetables

Note

Food which gives off or absorbs

odours and flavours as well as liquids

should always be stored covered or

in closed containers.

High- percentage alcohols should be tightly sealed and stored

upright.

NaturaFresh

The NaturaFresh compartment enables you to keep a range of fresh

food fresh for up to 3 times longer than usual whilst maintaining

the same quality as with conventional refrigerators.

The automatically controlled storage temperature, which is kept

constantly at just above 0°C, and the resultant humidity provide

the ideal storage conditions for different types of food.

The NaturaFresh compartment satisfies the requirements of a

chill compartment to EN ISO 15502.

The top drawer 8

is suitable for storing dry or wrapped food (e.g. dairy products,

meat, fish, cold meats). The storage

climate in this drawer is relatively

dry.

The drawer with humidity

control 9

When set to "humid", this drawer

can be used for storing salad,

vegetables and fruit. When the

drawer is full, the climate will be

"dew-fresh", with approximately

90% humidity.

You can set the humidity in this

drawer to dry or moist as required.

Humidity selection:

• "dry" setting: small humidity

symbol - slide control to left.

Insert food that is suitable for

being stored in a dry climate.

• "humid" setting: high relative

humidity of max. 90%, large

humidity symbol - slide control

to right. This setting is suitable

for storing unwrapped food with

a high moisture content such as

fresh lettuce.

Notes

• Unwrapped animal and vegetable foods should be stored

separately in the drawers. If there is not enough space for them

to be stored separately, make sure that they are wrapped.

• Do not allow different types of meat to come into contact with

one another but keep them packaged separately so as to avoid

premature bacterial spoilage.

• The following products should not be stored in the NaturaFresh

compartment: hard cheese, potatoes, cold-sensitive vegetables

such as cucumber, aubergines, avocados, semi-ripe tomatoes,

zucchini, and all cold-sensitive tropical fruits such as pineapple,

bananas, grapefruit, melons, mangoes, papaya, etc.

Saving energy

- Always ensure good ventilation. Do not cover ventilation open-

ings or grille.

- Do not place the appliance in areas of direct sunlight or next to

a cooker, radiator or similar object.

- The energy consumption depends on the installation conditions,

e.g. the ambient temperature.

- Keep the time the appliance is open to a minimum.

- Store food logically.

- First cool warm food to room temperature before storing it.

- Defrost frozen food in the refrigerator.

Freezer compartment

- Ensure that all food is well packed and covered for storage. This

will prevent frost from forming.

- If there is a thick layer of frost in the appliance: defrost the ap-

pliance.

68

Adjusting the temperature in the NaturaFresh com-

partment

The temperature is controlled automatically between 0°C and 3°C.

The temperature can be adjusted from b1 (coldest temperature

setting) to b9 (warmest temperature setting).

The presetting is b5.

Important

At the b1 to b4 settings the temperature may drop below 0°C and

therefore the food may freeze slightly.

Press

for 5 seconds. >>Display =

Display =

Use buttons and to select the desired setting.

Display =

Making ice cubes

• Fill the ice cube tray with water.

• Place the ice cube tray in the appliance

and leave it to freeze.

• The ice cubes can be removed from the tray by twisting or by

holding upside down for a short time under running water.

Freezer compartment

You can store frozen food for several months, make ice cubes

and freeze fresh food in the freezer compartment at a temperature

of -18°C and lower.

The air temperature in the compartment, measured by thermom-

eter or other instruments, may fluctuate.

Freezing

Fresh food should be frozen to core as quickly as possible.

You can freeze up to 2 kg/24 hours.

•

Set the temperature to 5°C or lower.

• Wait 4 hours.

• Place the fresh food in the freezer.

• After approx. 24 hours the fresh food will be frozen.

• Now set the temperature to the normal setting.

Deep frozen food can be placed into the cold freezer compart-

ment straight away.

CAUTION

Do not freeze bottles and cans of drinks. They

can burst during the freezing process.

Notes on freezing

• Pack frozen food in standard freezer bags or reuseable plastic,

metal or aluminium containers.

• Always write the date and contents on the pack and do not

exceed the stated storage time for the food.

• Only take out as much food as is immediately required for

thawing. Use food which has been thawed in prepared meals

as quickly as possible.

Frozen food can be thawed in the following ways:

- in a fan oven

- in a microwave oven

- at room temperature

- in the refrigerator

69

GB

Cleaning

Before cleaning, always switch off the appliance. Discon-

nect from the mains or switch off the fuse!

• Clean the inside and equipment with lukewarm water and a

little detergent. Do not use chemical solvents or any cleaning

agents containing sand or acid.

• Ensure that no cleaning water penetrates into the electrical

components or ventilation grille.

• Dry all parts well with a cloth.

• Do not damage or remove the type plate on the inside of the

appliance. It is very important for servicing purposes.

CAUTION

Risk of damage to the appliance components

and risk of injury due to hot steam.

Do not use steam cleaning equipment to clean

the appliance.

Malfunctions

• F0, F1, F2, F3, F4, F5, F6, F7, F8 or F9 appears in the display.

– The appliance has suffered a fault.

Contact the customer service department.

• When inserting the mains plug, the refrigeration unit does

not switch on, but a value is shown in the temperature

display.

– Demo mode is activated.

Contact the customer service department.

You may be able to rectify the following faults by checking

the possible causes yourself:

• Appliance does not function:

– Is the appliance switched on?

– Is the plug correctly fitted in the mains socket?

– Is the fuse intact?

• Loud running noise:

– Is the appliance set up firmly on the floor?

– Does the appliance cause nearby items of furniture or objects

to vibrate? Please note that noises caused by the refrigerant

circuit cannot be avoided.

• The temperature is not low enough:

– Is the temperature setting correct (see "Setting the tempera-

ture")?

– Does the separately installed thermometer show the correct

reading?

– Is the ventilation system working properly?

– Is the appliance set up too close to a heat source?

If none of the above causes apply

and you cannot rectify the fault

yourself, contact the nearest

customer service department

stating the type designation

1,

PNC number

2 and appliance

number

3 as indicated on the

type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Shutting your appliance down

If your appliance is to be shut down for any length of time, switch

it off and disconnect the plug or switch off or unscrew the fuse.

Clean the appliance and leave the door open in order to prevent

unpleasant smells.

The appliance complies with the relevant safety regulations and

EC Directives 2004/108/EC and 2006/95/EC.

Defrosting

The refrigerator compartment defrosts automatically.

Freezer compartment

After a long period of operation, a layer of frost or ice can build up

on the walls of the freezer compartment. This increases energy

consumption.

• Pull out the plug or switch off the fuse!

• Wrap the frozen food in paper or blankets and store in a cool

place.

• Leave the appliance door and the freezer compartment door

open when defrosting.

• After a defrosting time of approx. 20 minutes, the layer of frost

or ice can be detached from the interior container by hand and

removed.

• After defrosting, mop up the remaining water and clean the

appliance.

CAUTION

Risk of damage to the refrigerant circuit and

flammability hazard due to leaking refrigerant.

Do not use any mechanical devices or other

artificial aids for defrosting other than those

recommended by the manufactur er.

70

Supplied accessories

Cover profile (covers the gap between

the top of the appliance and the recess)

Covers

Installation on the left at the top for right-hand

hinged door.

Installation on the right at the top for left-hand

hinged door.

Cover

Installation on the left at the bottom for right-hand

hinged door.

Installation on the right at the bottom for left-hand

hinged door.

Covers for openings in the interior container in the

freezer compartment area

These parts are required if the appliance door

hinges are changed over.

Cover

Installation on the right at the top for right-hand

hinged door.

Installation on the left at the top for left-hand

hinged door.

Side cover for the door panel

retaining bracket

Top cover for the door panel retaining

bracket

Pin to restrict the hinge opening angle

to 90°

Angle bracket

To connect the appliance door and the

door panel.

Cover for the angle brackets.

2 pcs.

Angle bracket

To connect the appliance door and the

door panel.

2 pcs.

Retaining plate

To connect the appliance door and the

door panel.

2 pcs.

4 pcs.

12 pcs.

8 pcs.

2 pcs.

Ring spanner

Note

The accessory pack contains all necessary components for an

entire range of appliances. Parts may therefore be left over after

installation, depending on the appliance type.

71

GB

Changing over door hinges

Door hinges should only be changed by a trained expert.

Changing the door hinges must be done by two people.

6.

Important

The door must now be held secure by somebody.

5.

5. Remove screws.

Remove door.

6. Transfer the bottom attach-

ment bracket.

Note

Screw in the screws, push the bracket to the left as

far as it will go, then tighten the screws.

7. Unscrew the top attachment

bracket.

7.

1.

2.

1. Remove cover.

2. Pull soft stop mechanism downwards.

The soft stop mechanism will then

contract.

3. Unscrew soft stop mechanism.

3.

4. Transfer ball stud to the opposite

side.

4.

72

8.

9.

8. Remove the retaining bracket and

transfer to the opposite side.

9. Screw on the top attachment bracket.

Note

Screw in the screws, push the bracket to the left as

far as it will go, then tighten the screws.

Changing over the hinges of the freezer compartment

door

10. Tilt lower part of the bracket down-

wards.

11. Remove screw.

Remove the compartment door with

the bracket downwards.

10.

11.

12. Transfer door latch.

13. Close the openings with the covers (supplied in

the accessory pack).

12.

13.

14. Transfer bracket to the opposite side.

15. Turn the compartment door through 180°.

14.

15.

16. Insert the compartment door in the top left door mounting.

17. Screw on bracket.

18. Close lower part of the bracket.

16.

17.

18.

73

GB

19. Unscrew hinges and re-fit on the opposite

side at diagonals to the original position.

19.

20.

21.

20. Screw on door.

21. Click cover into place.

22. Screw on soft stop mechanism.

22.

23.

23. Extend the soft stop mechanism,

push it onto the ball stud and click

into place.

74

Limiting the door opening

angle to 90°

If necessary, limit the maximum door

opening angle to 90°.

Fully insert pins (enclosed in the

accessory pack) in each hinge

in the opening shown.

Open the door to just under 90°.

Important

The pins must be inserted before the appliance is

installed in the recess.

It is not possible to insert the top pin once the appli-

ance has been installed.

Installation options

External door panel

The door panel rests on

the panels of the unit.

Internal door panel

The door panel fits inside the body of

the unit. The front of the unit is visible.

Door panel design

Maximum panel weight = 19 kg

Dimensions of external door

panel

A = recess height plus overlapping of

the panel at the top and bottom

B = max. 562 mm

C = min. 16 mm

max. 19 mm

Dimensions of internal door

panel

A = max. 1518 mm

B = max. 544 mm

C = min. 16 mm

max. 19 mm

75

GB

Installation dimensions

In this area, the power cord comes out of the appliance rear.

Free length of the power cord = 2000 mm

Choose the position of the socket considering these specifications.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Important

In order to avoid any problems when installing the appliance and

to avoid damage to the appliance, the following conditions must

be complied with.

The kitchen unit must be aligned horizontally and

vertically.

Minimum wall thickness of the body of the unit = 16 mm.

Important

The minimum recess depth of 575 mm applies to the

installation option with external door panel.

In the case of the installation option with internal

door panel, the panel thickness must be added to

the 575 mm.

Appliance dimensions

Side view

View from above

Maximum door

opening angle

76

Appliance venting

Important

The clear ventilation cross-

section must be at least

200 cm² from the lower ven-

tilation opening right to the

upper one.

Types of air outlet

1 Directly above the appliance

2 Above the top unit

3 From the front of the top unit with decor grille

Important

When using decor grilles, it must be taken into account

that the clear ventilation cross-section corresponds

to the sum of the individual openings in the grille.

A cut-out section of merely 200 cm² for installing the

ventilation grille is thus not sucient.

Installing the appliance

1.

Fit cover profile.

On appliances with

hinges on the right

On appliances with

hinges on the left

2.

Slide the appliance into the recess.

Route the mains cable towards the

socket.

When sliding in the appliance, make sure

that the mains cable is not damaged.

Installation option with external door panel

A = max. 43 mm

Installation option with internal door panel

A = 43 mm + panel thickness

1.

2.

77

GB

5.

3.

Secure the appliance through the hinges using

two 4 x 17 screws per hinge.

4.

• Undo the screws 1.

• Slide bracket towards the unit wall.

• Tighten the screws

1.

• Screw in the screws

2 (4 x 17).

3.

4.

5.

Remove mounting strips, insert in the

adjacent openings and push

downwards as far as they will go.

Close the door.

6.

Push the mounting strips upwards.

The bottom edge of the mounting strips must be aligned with the

top edge of the adjacent unit door.

Installation option with internal door panel

6.

Installation option with external door panel

78

Important

When removing, ensure that the mounting strips do

not move.

7.

Open the door.

Unscrew the retaining bracket with

the mounting strips.

To do so, use the ring

spanner provided.

7.

8.

10.

9.

10.

A = 1190 mm

8.

Position the retaining bracket in the middle of the door panel and

secure to the door panel using six 4 x 15 screws.

9.

Slide the cover onto the retain-

ing bracket from the side.

10.

Attach the retaining plates to the door panel using three 4 x 15

screws per plate.

Important

Fit the unit handle to the panel at this stage.

11.

Remove the mounting strips and insert in the

adjacent openings.

12.

Pull soft stop mechanism downwards.

The soft stop mechanism will then

contract.

13.

Pivot soft stop mechanism to the left.

13.

79

GB

15.

Place the door panel on the adjusting screws and align in the centre.

Screw the nuts onto the adjusting screws and tighten.

To do so, use the ring spanner provided.

16.

Close the door and check the position

of the door panel.

16.

14.

Screw the angle brackets onto the underside of the door using

4 x 15 screws.

Push the bracket to the back as far

as it will go, then tighten the screw.

21.

22.

18.

17.

20.

19.

Aligning the door panel

17.

Undo the nuts.

18.

Align the door panel vertically by

turning the adjusting screws.

Use a Torx 15 screwdriver (not supplied in the

accessory pack).

19.

Align the door horizontally.

20.

Tighten the nuts.

21.

Undo the screws.

22.

Adjust the depth of the door panel.

Tighten the screws.

80

23.

Screw the bottom of the door onto the door panel (4 x 15 screws).

23.

24.

Undo the angle bracket screws on

the underside of the door.

Adjust the depth of the panel.

Tighten the screws.

Fit the cover to the outer angle

bracket.

Note

Do not fit a cover to the inner angle

bracket. This is the area where the

soft stop mechanism is located.

24.

Important

Align external door panels so that

there is a gap of approx. 2 mm be-

tween the door panel and the body

of the unit.

This will ensure that the door seal

closes properly.

25.

Schließdämpfer auseinanderziehen, auf

den Kugelbolzen drücken und einrasten.

25.

26.

27.

Fit cover caps.

26.

Insert the angle brackets

behind the retaining plates and

secure using two 3.5 x 11 screws per

bracket.

Important

Slide the angle bracket to the left, then tighten the

screws.

The angle bracket must be in contact with the

retaining plate.

Page is loading ...

Electrolux IK257SZL A, IK257SZL, IK257SZL B, IK257SZR, IK257SZR A, IK257SZR B User manual

Related papers

Other documents