Page is loading ...
OWNER’S
MANUAL
CITATION
MULTIBEAM 700
2
/
IMPORTANT SAFETY
INSTRUCTIONS
Verify Line Voltage Before Use
The CITATION MULTIBEAM 700 (soundbar) has been designed
for use with 100-240 volt, 50/60 Hz AC current. Connection to
a line voltage other than that for which your product is intended
contact your selling dealer before plugging the unit in to a wall
outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied
used with this product. As with all electrical devices, do not run
power cords under rugs or carpets, or place heavy objects on
Handle the AC Power Cord Gently
pull the plug; never pull the cord.
If you do not intend to use your speaker for any considerable
Do Not Open the Cabinet
center.
3
/
TABLE OF CONTENTS
/ IMPORTANT SAFETY INSTRUCTIONS ............................................. 2
/ ........................................................................................ 4
/ WHAT’S IN THE BOX ............................................................................... 5
/ ............................................................................ 6
/ INSTALLATION ........................................................................................... 11
/ ............................................................................. 14
/ ............................................... 17
/ POWER ON ................................................................................................18
/ CONNECTING TO INTERNET .............................................................19
/ ...................... 20
/ ....... 21
/ USING YOUR CITATION MULTIBEAM 700 ...................................24
/ ..................................................................................31
/ SET TI N GS...................................................................................................33
/ SPECIFIC ATIONS ..................................................................................... 35
/ TROUBLESHOOTING ............................................................................36
/ ..........................................................................................38
4
/
step-by-step instructions to help you set up and get started.
Read and understand all the safety instructions before using
your product.
This product may have an important software update
available. Please follow the instructions to connect the
product to Wi-Fi to ensure that your product has the most
recent software updates.
If you have any questions about these products, their
installation or their operation, please contact your
5
/
WHAT’S IN THE BOX
1
5 62
3
x2
x2
x2
x4
4
1. Main unit
2. Power cord*
3. HDMI cable
4. Optical cable
5. Remote control (with 2 AAA batteries)
6. Wall-mounting kit
*Power cord quantity and plug type vary by regions.
Inserting batteries before using the remote control (AAA
batteries x 2)
Slide the battery cover in the direction of the arrow until it is
that their polarity is correct. Slide the battery cover back into
position.
6
/
P
Front Panel & Top Panel
1
2
3
1. Touch screen
•
• Tap an icon to select.
• Tap
to return to the previous screen, tap to go to
Wi-Fi signal indicator.
Push to talk to Google Assistant.
/ / /
Press to select a source (Bluetooth / AUX/
product.
7
2. - / + (Volume)
•
•
3. LED indicators (Google)
White (Breathing slowly) Listening
White (Breathing fast) Responding
White (Breathing for
startup
Back Panel
1235 4
5
RESET
AUX IN OPTICAL IN HDMI OUT (TV ARC) POWER
RESET
AUX IN OPTICAL IN HDMI OUT (TV ARC) POWER
1.
• Connect to the power supply.
2.
•
3.
•
digital device.
8
4.
•
5.
• Press and hold for 5 seconds to restore the factory
settings.
9
Remote Control
1
2
3
4
6
5
8
7
9
10
11
14
13
12
1. (Power)
• Power on or switch to standby.
2. Source selector
• Select an input source for the
soundbar:
/ /
/ .
• Press and hold
to pair with a
new device.
3. 1/2/3
• Select pre-recorded voice
4.
•
audio.
5.
+ / -
•
level.
6.
•
Movie / News / Standard.
7.
•
AirPlay or Bluetooth playback.
8.
/
•
Bluetooth playback.
10
9.
•
TOWER)
10.
- / +
•
(after you connect the optional subwoofer CITATION
SUB (S)).
11.
- / +
•
you connect the optional satellite speakers CITATION
12.
•
13.
•
14.
• Push to talk to Google Assistant.
11
/
INSTALLATION
Placement
NOTES:
•
soundbar.
•
Place the soundbar on its rubber feet on a stable and level
TV
CAUTION:
•
•
/ INSTALLATION
12
Wall-mount
NOTES:
•
weight of this product.
•
•
•
•
•
1)
> 5CM (1.9”)
TV
/ INSTALLATION
13
2)
hook the soundbar on the wall.
≤8 mm/
0.31"
4mm/0.16"
≥35 mm/1.4"
1 2 3
14
/
NOTES:
•
•
HDMI (Preferred)
1)
connector on the back of the soundbar to the
2) Press
on the touch screen or press the
HDMI (ARC)
TV
HDMI OUT (TV ARC)
RESET
AUX IN OPTICAL IN HDMI OUT (TV ARC) POWER
NOTES:
•
single connector. It is the best option to connect to your soundbar.
•
•
15
Optical
NOTE:
•
of the optical cable.
1) Connect the connector on the soundbar to the
2) Press
on the touch screen or press the
TV
OPTICAL OUT
OPTICAL IN
RESET
AUX IN OPTICAL IN HDMI OUT (TV ARC) POWER
TV Remote Control Setup
HDMI-CEC
16
TV remote control learning
1) On the soundbar, swipe the touch screen up/down/left/right
to select
>
2) Press the button to start the Universal IR learning on your
3)
NOTES:
•
source device that is connected to the soundbar through cables,
like OPTICAL / AUX / HDMI TV.
17
/
CONNECTING TO
Optical or Analog
1) Connect the or connector on the
soundbar to the or jack of the
cable (sold separately).
2) Press
or on the touch screen or press
the or
select the or
AUX-IN
AUX-OUT
OPTICAL OUT
OPTICAL IN
RESET
AUX IN OPTICAL IN HDMI OUT (TV ARC) POWER
18
/
POWER ON
NOTES:
• Use the provided power cord only.
•
• When you disconnect the power cord, always pull the plug, never
the cable.
•
1) Plug one end of the AC power cord into the
connector on the back of the soundbar.
2)
touch screen will turn on. Alternatively, press
on the
POWER
RESET
AUX IN OPTICAL IN HDMI OUT (TV ARC) POWER
3) Select your language as instructed on the touch screen for
19
/
CONNECTING TO
INTERNET
MULTIBEAM 700 to the Internet through Wi-Fi.
1)
tablet.
2) Power on your CITATION MULTIBEAM 700.
3)
MULTIBEAM 700 as instructed in the app. Always follow the
4) Sign in with your Google account. If you do not have, create
a new one.
>5m
(Android/iOS)
Google Home
Google Home
* To avoid any interference, keep a minimum distance of 5
meters (16.4 feet) between the soundbar and your Wi-Fi
router.
CAUTION:
•
•
• Once this product is connected to the Internet, it will receive a
20
/
SETTING UP
MULTIBEAM
soundbar sound settings for a better surround sound
• On the soundbar, swipe the touch screen up/down/left/
right to select
>
NOTE:
•
MULTIBEAM 700.
/
