Datalogic Memor X3 Operating instructions

Brand: Datalogic

Model: Memor X3

Type: Operating instructions

Datalogic Memor X3 is a versatile mobile computer that combines advanced data collection capabilities with seamless Ethernet connectivity. It features a user-friendly interface, enabling easy integration into existing networks. With its ability to charge up to four terminals simultaneously and provide a stable connection for data transfer, the Memor X3 streamlines operations in various industries, including retail, healthcare, and logistics.

Memor

Multi-slot Dock Ethernet

The Multi-slot Dock Ethernet paired with a Memor X3 mobile

computer builds a reading system for the collection, decoding

and transmission of barcode data.

The Multi-slot Dock Ethernet can charge up to four terminals

and provides Ethernet connection for data transfer via local area

networks.

822001822 (Rev A) Jan. 2018

MOBILE COMPUTER INSERTION/REMOVAL

For correct insertion into the dock, insert the Memor X3 from the

top of the dock and push it down.

To remove the mobile computer from the dock, pull it upwards

while holding the dock firmly down.

LED INDICATORS

Power LED Status Indicator

ETHERNET CONNECTION

The Multi-slot Dock Ethernet drivers are pre-installed on the

Memor X3 and initiate automatically when the terminal is placed

in a properly connected Multi-slot Dock Ethernet.

When the Memor X3 is inserted into the Multi-slot Dock Ether-

net, the connectivity icon on the taskbar indicates that the

mobile computer is connected to a network.

How to Connect

Connect the Ethernet dock (Ethernet port 1 - D) to an Ethernet

hub or to a port on the host device. Connect the Ethernet dock

(power port - B) to the power supply.

Note

The user is responsible for any damages caused by

incorrect use of the equipment or by inobservance

of the indication supplied in this manual.

Note

Do not attempt to disassemble the Multi-slot

Ethernet Dock, as it does not contain parts that can

be repaired by the user. Any tampering will

invalidate the warranty.

A. Power LED C. Ethernet Port 1

B. Power Port D. Ethernet Port 2

COLOR STATUS 1

Green Costant Dock Powered 2

NOTE

The maximum bandwidth capacity for each Mobile

Computer is 12Mbps.

CAUTION

Connections should always be made with power

OFF!

A. Multi-slot Dock Ethernet D. Ethernet Port 1

B. Power Port E. UTP CAT 5E cable

(recommended use)

C. Power supply (power cord

to be ordered separately)

F. Ethernet hub

Daisychaining Ethernet Connection

To connect several docks to an Ethernet network, the Ethernet

docks may be daisychained. It is recommended not to connect

more than 4 docks in order to maintain the optimal baud rate.

Connect the first Ethernet dock to the Ethernet Switch. Connect

the additional docks as shown in figure below.

TECHNICAL FEATURES

COMPLIANCE

FCC Compliance

- This device complies with part 5 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

- This device has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiated

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician

for help.

Industry Canada (ICES-003) Compliance

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Datalogic and the Datalogic logo are registered trademarks of Datalogic

S.p.A. in many countries, including the U.S. and the E.U. Memor is a

trademark of Datalogic S.p.A. and/or its affiliates. All other brand and

product names may be trademarks of their respective owner.

www.datalogic.com

A. Power supply (power cord

to be ordered separately)

D. Ethernet Port 1

B. UTP CAT 5E cable

(recommended use)

E. Ethernet Port 2

C. Ethernet hub

WARNING

Do not use the cradle in a PoE network, i.e. in a

network with PSE able to supply power: there is

the risk to compromise, in irreversible way, the

functionality of the cradle.

MEMOR X3 MULTI-SLOT DOCK ETHERNET

Electrical Features

Power Supply

*. Use only DL approved power adapters.

12 VDC ± 5%

Consumption Max. 5 A

Indicator Power on LED (green)

Environmental Features

Working Temperature

†

†. Battery must be charged at a temperature ranging from 0° to +36

°C (+32° to +96.8 °F).

0° to +50 °C (+32° to +122 °F)

Storage Temperature -20° to +70 °C (-4° to +158 °F)

Humidity 80% non condensing

Mechanical Features

Dimensions 108 X 310 X 102 mm (4.25 X 12.2 X 4.02 in)

Weight 1178 g (41.55oz)

Datalogic Memor X3 Operating instructions

Datalogic Memor X3 Operating instructions

Datalogic Memor X3 Operating instructions

Related papers

Other documents