2. Atdec
  3. AWM-WS
AWM-WS

Atdec AWM-WS Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Atdec AWM-WS Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AWM-WS Page 1 of 2
Installation Guide
AWM-WS
Slat Wall Adaptor
COMPONENT CHECKLIST
A
Bracket Assembly
(x1)
B
Screw
M6x10mm
(x2)
C
4mm Allen Key
(x1)
A
Bracket Assembly
(x1)
B
Screw
M6x10mm
(x2)
C
4mm Allen Key
(x1)
IMPORTANT INFORMATION
! The AWM-W6 60 Wall Channel (sold separately) is required to complete this installation.
! Please ensure this product is installed as per these installation instructions.
! The manufacturer accepts no responsibility for incorrect installation.
! Ensure that the weight rating of the supporting wall or rail is sufficient.
REQUIRED TOOLS
WEIGHT RANGE
• All tools provided
0 - 9.1kg
(0 - 20lbs)
AWM-WS Page 2 of 2
Assembly instructions
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20180830
1. Install the adaptor into the slot and adjust the tension screw from above to lock
into place.
2. Attach the wall channel to the front of the Adaptor.
NOTE: Installation of the adaptor is now complete! Refer to Arm installation guide for arm installation.
A
Bracket Assembly
(x1)
B
Screw
M6x10mm
(x2)
C
4mm Allen Key
(x1)
A
Bracket Assembly
(x1)
B
Screw
M6x10mm
(x2)
C
4mm Allen Key
(x1)
Note
AWM-W6 60 Wall Channel
sold separately.
/