Akerstroms Trux 700 Installation guide

Brand
Akerstroms
Model
Trux 700
Category
Security device components
Type
Installation guide

Akerstroms Trux 700 is a compact device that can be mounted on a wall or ceiling using brackets of different sizes. It features a start button, increase and decrease buttons for screen intensity adjustment, and a power cable with a length of 4 meters. The device has a 12V DC voltage supply and provides connections for external devices such as a mouse and keyboard. It also supports the use of a GPRS antenna for wireless connectivity, as described in a separate installation manual.

Akerstroms Trux 700 is a compact device that can be mounted on a wall or ceiling using brackets of different sizes. It features a start button, increase and decrease buttons for screen intensity adjustment, and a power cable with a length of 4 meters. The device has a 12V DC voltage supply and provides connections for external devices such as a mouse and keyboard. It also supports the use of a GPRS antenna for wireless connectivity, as described in a separate installation manual.

Installation Manual Trux 700 (English)
93 5164-100 A0
Åkerströms Trux AB
Björbovägen 143
SE-780 45 Björbo, Sweden
Phone +46 241 250 00
Fax +46 241 232 99
E-mail [email protected]
www.akerstroms.com
Under no circumstances can Åkerströms Trux AB be held liable for damages arising
from use of this document or from the hardware and software that is described herein.
Check the contents of the box against the label on the packaging.
Read through these installation Manual before commencing assembly.
!
Connect the supply cable only when everything
else has been assembled.
Tools are only required for assembling the ball attachments and for
attaching the nine-pin connectors.
1. Fit the ball attachments for the brackets.
The diameter of the holes is 5.5 mm.
[mm]
1a Fit the ball attachments
for the 2¼” bracket Ø8 mm
2. Assemble the Trux computer with the brackets at the desired angle.
Three sizes of brackets are available as options.
1½” Brackets 2¼” Brackets
Length: 275 mm (10⅞") 438 mm (17¼”)
Length: 190 mm (7½") 285 mm (11¼”)
Length: 134 mm (5¼") 210 mm (8¼”)
3. Mount the antenna. 4. Connect the cable for external connections.
Only the connections for voltage feed, mouse and
keyboard are described here.
12VDC
MULTI PURPOSE
5. Connect 12 V direct current voltage supply. 12V
Ensure that pin 1 is connected to
Connection for mouse
+ pole (brown conductor) and pin 3 to and keyboard.
– pole (white conductor).
0V
Connection for power
supply. Pins 5 and 6 used
for shutting down.
See the product manual for
further information. Adapter for connecting
mouse and keyboard with
The length of the power cable is 4 meters (5 1/2 yards) PS2 connectors.
6. Press the start button Use the Increase and Decrease
to start the computer. buttons to set the intensity of the
screen.
The computer is now ready for use. See the user manual for more
information.
For installation of GPRS-aerial see installation manual GPRS.
Ø 70
Installationsmanual Trux 700 (Swedish)
93 5164-000 A0
Åkerströms Trux AB
Björbovägen 143
SE-780 45 Björbo
Phone +46 241 250 00
Fax +46 241 232 99
E-mail [email protected]
www.akerstroms.com
Åkerströms Trux AB kan under inga omständigheter hållas ansvarig för skador som kan uppstå som
en följd av användningen av detta dokument eller av den maskin- och programvara som beskrivs häri.
Kontrollera innehållet i lådan mot etiketten på emballaget.
Läs igenom denna installationsmanual innan montaget påbörjas.
!
Anslut matningskabeln sist när allt annat är monterat.
Verktyg behövs endast för montering av kulfästen och för att fixera
de niopoliga kontaktdonen.
1. Montera kulfästena 1½”.
Hålens diameter Ø 5,5 mm.
[mm]
1a. Montera kulfästet 2¼”
Hålens diameter Ø 8 mm
2. Montera Truxdatorn med armarna (armen) i den vinkel som önskas.
Som tillval finns tre olika storlekar på armar.
1½” Kulfäste 2¼” Kulfäste
Längd: 275 mm (10⅞") 438 mm (17¼”)
Längd: 190 mm (7½") 285 mm (11¼”)
Längd: 134 mm (5¼") 210 mm (8¼”)
3. Montera antenn. 4. Anslut kablage för externa förbindningar.
Här är endast anslutningar för spänningsmatning, eventuell mus
och tangentbord beskrivna.
12VDC
MULTI PURPOSE
Anslut 12 V likspänningsmatning. 12V
Se till att stift 1 är ansluten till
Anslutning för mus
+ pol (brun ledare) och stift 3 till
och tangentbord.
– pol (vit ledare).
0V
Anslutning för matnings-
spänning. Stift 5 och 6
används för nedsläckning.
Se produktmanualen för
ytterligare information.
Matningskabelns längd 4 meter. Adapter för anslutning av mus
och tangentbord med PS2-
kontakter.
4. Tryck på startknappen Med Minska och Öka knapparna
för att starta datorn. regleras intensiteten på skärmen.
Nu är datorn klar för användning. Se användarmanualen för mer
information.
För montage av GPRS-antenn se installationsmanual GPRS.
Ø 70
  • Page 1 1
  • Page 2 2

Akerstroms Trux 700 Installation guide

Brand
Akerstroms
Model
Trux 700
Category
Security device components
Type
Installation guide

Akerstroms Trux 700 is a compact device that can be mounted on a wall or ceiling using brackets of different sizes. It features a start button, increase and decrease buttons for screen intensity adjustment, and a power cable with a length of 4 meters. The device has a 12V DC voltage supply and provides connections for external devices such as a mouse and keyboard. It also supports the use of a GPRS antenna for wireless connectivity, as described in a separate installation manual.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents