LST Series 65/XP95 User manual

Type
User manual

LST Series 65/XP95 offers a range of detector bases and accessories for flexible fire detection solutions. The flush-mount detector base enables easy installation in false ceilings, while the conduit box facilitates surface mounting and cable management. The detector base backplate provides a clean and protected mounting surface. Address cards allow for individual detector addressing, simplifying system configuration. The detector mounting bracket offers versatile mounting options for various applications.

LST Series 65/XP95 offers a range of detector bases and accessories for flexible fire detection solutions. The flush-mount detector base enables easy installation in false ceilings, while the conduit box facilitates surface mounting and cable management. The detector base backplate provides a clean and protected mounting surface. Address cards allow for individual detector addressing, simplifying system configuration. The detector mounting bracket offers versatile mounting options for various applications.

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
MS-ZBH-Ap_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Detector Base Accesories
Series 65/XP95
Detector base for fl ush mounting in
false ceilings
Conduit box for surface mounting
Detector base backplate
Code cards for selection of the
detector address
Detector mounting bracket
Detector base for fl ush mounting (ADM technology)
Dimensions ø × H 150 × 15 (mm)
Colour white
Weight 70g
Order number 246034
Order name Detector Base/Anal./XP95/Disc/Apo 45681-250
The detector base in ush mounting design (fi g. A) ac-
commodates automatic fi re detectors Series XP95 and
Discovery for use in ADM loops with Apollo/Discovery
protocol. It is specially designed for mounting in false
ceilings made of mineral fi bre.
The detector address is selected by means of a code
card in the detector base. Therefore the detector can
be changed without additional tools. The package con-
tents includes a cover plate.
Specifi cations
Detector base for fl ush mounting (conventional technology)
Dimensions ø × H 150 × 15 (mm)
Colour white
Weight 70g
Order number 246035
Order name Detector Base/Conv./60/65/Apo 45681-251
The detector base in ush mounting design (fi g. B) ac-
commodates automatic re detectors in addressable
conventional technology. It is specially designed for
mounting in false ceilings made of mineral fi bre.
Individual detector addressing can be achieved by
connecting the optional Address Module NG60-1. The
package contents includes a cover plate.
Specifi cations
g. A
g. D
g. E
g. C
g. B
g. F
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
MS-ZBH-Ap_DBL_LST_EN_0804.PDF • PAGE 2
ABuilding Safety. Building Security.
Conduit box for surface mounting
The Conduit Box SZA-45681-204 (fi g. C) is a supple-
ment to the detector bases Series 65, XP95, Discovery
and Orbis for surface mounting and serves to easily
insert cable conduits or thick cables. The conduit box is
prepared for PG screw connections.
Dimensions ø × H 100 × 30 (mm)
Colour white
Weight 60g
Order number 246029
Order name Conduit Box/Apo SZA-45681-204
Specifi cations
Detector base backplate
Dimensions ø × H 112 × 15 (mm)
Colour white
Weight 40g
Order number 246030
Order name Backplate/Apo SZPL-45681-233
The plastic plate (fi g. D) is a supplement to the detector
bases Series 65, XP95, Discovery and Orbis and pro-
tects the mounting area from dust and dirt.
Specifi cations
Address cards
The code card (fi g. E) serves to assign the physical
address of an automatic re detector Series XP95 or
Discovery, or a loop-powered strobe Series XP95, in
the detector base. The address can be set as a binary
number between 1 and 126 by removing some of the
pips. One package contains 100 address cards in un-
coded condition.
Dimensions L × W × H 55 × 20 × 4 (mm)
Colour white
Weight per card 2g
Order number 249039
Order name Address Cards/100pcs./Anal./XP95/Disc/Apo CK-38531-771
Specifi cations
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
MS-ZBH-Ap_DBL_LST_EN_0804.PDF • PAGE 3
ABuilding Safety. Building Security.
Detector mounting bracket
The Detector Mounting Bracket MMW1-1 (fi g. F) is made
of galvanised steel sheet and serves for the lateral
mounting of an automatic re detector, e.g., in false
oors, elevator shafts or shelves. The bracket provides
all threaded holes needed for easy mounting of a de-
tector base.
Specifi cations
Dimensions L × W × H 130 × 120 × 40 (mm)
Weight 225g
Order number 249044
Order name Detector Mounting Bracket MMW1-1
  • Page 1 1
  • Page 2 2
  • Page 3 3

LST Series 65/XP95 User manual

Type
User manual

LST Series 65/XP95 offers a range of detector bases and accessories for flexible fire detection solutions. The flush-mount detector base enables easy installation in false ceilings, while the conduit box facilitates surface mounting and cable management. The detector base backplate provides a clean and protected mounting surface. Address cards allow for individual detector addressing, simplifying system configuration. The detector mounting bracket offers versatile mounting options for various applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI