Panasonic KXTG2386 Operating instructions

Panasonic
Brand
Panasonic
Model
KXTG2386
Category
Telephones
Type
Operating instructions

This manual is also suitable for

– 1 – PQQW13469ZA F0504-0 D
2.4 GHz Digital Cordless Answering System
Model No.
KX-TG2386
Quick Set-Up Guide
Please read the Operating Instructions for further details.
Step 1
Setting Up the Base Unit
• USE ONLY WITH Panasonic AC ADAPTOR PQLV1.
• Use only the telephone line cord included in the unit.
• Make sure that the AC adaptor and telephone line cords are plugged into the unit
properly.
• If the unit is connected to a telephone line with DSL service, see page 9 in the
Operating Instructions.
Step 2
Setting Up the Handset
Install the battery.
Insert the battery (1), and
press it down until it snaps
into the compartment (2).
Close the cover.
Charge the battery
for 6 hours before initial use.
• The unit beeps once, the CHARGE indicator lights, and
“Charging” is displayed.
• When the battery is fully charged, “Charge
completed” is displayed.
Telephone Line Cord
AC Adaptor
Fasten the cords to prevent
them from being disconnected.
2
1
CHARGE Indicator
OR
PQQW13469ZA.fm 1 ページ ２００４年６月７日　月曜日　午後２時２３分
– 2 –
Step 3
Setting Date and Time
1 Press [MENU].
2 Scroll to “Date and time” by
pressing [
d
] or [
B
], then press
the soft key (Select).
3 1 Enter 2 digits each for the
month, day, and year. (Ex.
To set May. 15, 2004, enter
“05 15 04”.
)
2
Enter 4 digits for the time
(hour and minute). (Ex. To set
9:30, enter “0930”.)
• To move the cursor, press [
d
] or
[
B
].
4 Select “AM” or “PM” by pressing
the soft key (AM/PM).
5 Press the soft key (Save), then
press [OFF].
• To confirm the date and time,
repeat steps 1 and 2.
(The current date and time are
displayed.) When finished, press
[OFF].
Step 4
Recording Your Own Greeting (Optional)
You can record a personal greeting message of up to 2 minutes. If you do not record
your own message, one of two pre-recorded greetings will be played for callers.
For details, see pages 23 – 25 in the Operating Instructions.
123
Press
[GREETING REC]
twice.
After the long beep,
talk into the MIC.
When finished,
press
[GREETING REC]
or [STOP].
Date and time
Back Select
K
d
BL
Example
Date:
|
12.31.2004
Time:12:00 AM
AM/PM Save
K
L
Date:
|
05.15.2004
Time:09:30 AM
AM/PM Save
K
L
Date:
|
05.15.2004
Time:09:30 AM
AM/PM Save
K
L
PQQW13469ZA.fm 2 ページ ２００４年６月７日　月曜日　午後２時２３分
– 3 –
Step 5
Subscription Service
In order to use Caller ID, Call Waiting or Call Waiting Caller ID, you must first
subscribe to the desired service.
For more information, contact your telephone company.
If you want to use the Call Waiting Caller ID feature, but it does not
function at all.
You may need to contact your telephone company to activate this specific service, even
if you already subscribed to both Caller ID and Call Waiting with Caller ID services
(CWID).
If you subscribe to a flat rate bundle service including Caller ID, Call
Waiting, Voice Mail and unlimited local/regional/long distance calls,
please read the following.
a) To use the Voice Mail service provided by the telephone company rather
than the unit’s Answering System, please turn off the Answering System by
pressing [ANSWER ON] on the base unit.
• This unit does not have an indicator to indicate if there are new messages
in your mailbox service.
b) To keep using the Answering System rather than the Voice Mail service
provided by your telephone company, please contact your telephone
company to deactivate the Voice Mail service in your bundle service.
If the telephone company cannot do that, please set the number of rings so
that the telephone answering system can answer calls prior to Voice Mail
service. It is necessary to check the “Number of Rings” required to activate
the Voice Mail service provided by your telephone company before
changing this setting.
As an example to set Number of Rings to “2”:
Press [MENU] [0] [6] [1]. When “Number of rings” is displayed,
press [2] soft key (Save).
(Refer to page 75 in the Operating Instructions, if you need to set to the
different number.)
PQQW13469ZA.fm 3 ページ ２００４年６月７日　月曜日　午後２時２３分
– 4 –
Location of Controls
Base unit
Handset
[MESSAGE/SLOW TALK]
Press once to playback messages.
Press during playback to slow down
playback speed.
[ANSWER ON]
Press to turn on/off the Answering System.
[GREETING REC]
(Record)
Press twice to record a
greeting message.
[GREETING CHECK]
Press to check the
greeting message.
[ERASE]
– Individual message:
Press during playback.
– All messages:
Press twice.
– Greeting:
Press after pressing
[GREETING CHECK].
[REDIAL]
Press to redial.
[FLASH/CALL WAIT]
Press to answer another incoming
call.
[MUTE]
Press to mute a conversation.
[SP-PHONE]
Press to begin or end a hands-free
phone conversation.
[C] (TALK)
Press to make/answer calls.
[s] (Speakerphone)
Press to turn on,
to begin a hands-free
phone conversation.
[FLASH/CALL WAIT]
Press to answer another
incoming call.
[REDIAL]
Press to redial.
[OFF]
Press to end calls or exit
programming/phone book/
Caller List.
Navigator Key
Microphone
Soft keys
[MENU]
Press to enter programming
mode.
Display
Ringer/Message Alert
Indicator
PQQW13469ZA.fm 4 ページ ２００４年６月７日　月曜日　午後２時２３分
– 5 –
Handset soft keys
• When a function name does not appear above a soft key, the soft key has no function.
Handset navigator key
Two soft keys are used to select functions displayed directly
above each key. Functions displayed above the keys will
change depending on the state of use.
On this sample display, “ (VE)” and “Mute ” are displayed
above soft keys.
Scrolls up [
B
] and down [
d
] the function menu, the Caller List
and the phone book.
Increases [
B
] or decreases [
d
] the handset ringer and receiver/
speaker volumes.
Throughout this guide, the navigator key is indicated by the arrows [
d
] or [
B
].
Using Phone Book
a) Storing Names and Numbers
Press the soft keys (Phone book) and (Add), then enter a name and
phone number using dialing buttons (0–9), navigator keys (
d
,
B
) and
soft keys by following display.
(Refer to page 44 in the Operating Instructions for details.)
b) Dialing from the Phone Book
Press the soft keys (Phone book) and (Search). Search for the desired
item by pressing [
d
] or [
B
], then press [
C
] or [
s
].
(Refer to page 46 in the Operating Instructions for details.)
c) Chain Dial
You can dial a combination of phone book or manual key pad entries while
making a call. This feature can be used, for example, to first automatically
dial a calling card access number that you have stored in the phone book,
then manually or automatically dial your PIN and then automatically dial the
destination number from the phone book.
Press [MENU] while you are on a call. Search for the desired item by
pressing [
d
] or [
B
], then press the soft key (Call).
• If required, repeat steps for any remaining numbers.
(Refer to page 48 in the Operating Instructions for details.)
J 5
Talk
00-00-32
(VE) Mute
KL
KL
Pressing the right soft key selects mute “Mute
”.
L
Pressing the left soft key selects Voice Enhancer “ (VE)
”.
K
PQQW13469ZA.fm 5 ページ ２００４年６月７日　月曜日　午後２時２３分
– 6 –
Using Caller List
Please make sure that you have already subscribed to Caller ID service.
a) Viewing the Caller List
Press the soft key (Rcvd calls), then press [
d
] to search the Caller
List.
(Refer to page 38 in the Operating Instructions for details.)
b) Calling Back from the Caller List
Press [
C
] or [
s
] while you are viewing a phone number to call back.
If you need to edit a phone number before calling back, press the soft
key (Select). You can delete “1” or “1 with area code” by pressing the
soft key (Edit) repeatedly.
(Refer to page 39 in the Operating Instructions for details.)
c) Caller ID Number Auto Edit
Once you call back an edited number (see above), this unit can
automatically edit incoming phone numbers from the same area code in the
Caller List and each time you receive a call.
You need to turn on this feature. (*Factory preset is on.)
(Refer to page 41 in the Operating Instructions for details.)
Using One-Touch Dialer
a) Storing Names and Numbers
Press the soft keys (Phone book) and (Search), then search for the
desired item using navigator keys (
d
,
B
) then press [MENU], [1], and
soft keys by following display.
(Refer to page 50 in the Operating Instructions for details.)
b) Dialing from the One-Touch Dialer
Press and hold the desired registration number using dialing button
(0–9), then press [
C
] or [
s
].
(Refer to page 51 in the Operating Instructions for details.)
PQQW13469ZA.fm 6 ページ ２００４年６月７日　月曜日　午後２時２３分
– 7 –
Listening to Messages
a) Playing Back New Message
When the NEW MESSAGE indicator FLASHES
on the
base unit, press [MESSAGE/SLOW TALK].
b) Playing Back Old Message
When the NEW MESSAGE indicator DOES NOT FLASH
,
press [MESSAGE/SLOW TALK].
Using Other Useful Features
a) Message Alert
The Ringer/Message Alert indicator on the handset will flash slowly
when you have new messages in the Answering System.
You need to turn on this feature to use.
(Refer to page 28 in the Operating Instructions for details.)
To turn on Message Alert : Press [MENU] [0] [#] [1] soft key (Save).
b) Talking Caller ID
The handset and base unit will announce the displayed name every ring if
name-and-number Caller ID is available.
You need to subscribe to Caller ID service to use this feature.
And you need to turn on this feature. (*Factory preset is on.)
(Refer to pages 36 and 37 in the Operating Instructions for details.)
Other Operation and Information
For information on other functions, refer to the following pages in the
Operating Instructions.
Adjusting Receiver/Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 30
Selecting Ringer Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 18, 19
Caller ID Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 35
Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 44
One-Touch Dialer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 50
Answering System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 23, 61
Changing Number of Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 26
Remote Operation from a Touch Tone Phone . . . . . . . . . . . . . . . . . . . . . . . p. 67
Call Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 62
Voice Enhancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 32
Direct Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 74, 75
PQQW13469ZA.fm 7 ページ ２００４年６月７日　月曜日　午後２時２３分
IMPORTANT!
If your product is not working properly. . .
1. Read this Quick Set-Up Guide or Operating Instructions
2. Visit our website: http://www.panasonic.com/support
3. Contact us via the web at: http://www.panasonic.com/contactinfo
4. Call us at: 1-800-211-PANA(7262)
To order battery, 1-800-332-5368
http://www.panasonic.com/batterystore
PQQW13469ZA.fm 8 ページ ２００４年６月７日　月曜日　午後２時２３分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Panasonic KXTG2386 Operating instructions

Panasonic
Brand
Panasonic
Model
KXTG2386
Category
Telephones
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents