Panasonic KXP1695 Important information

TechInfo Sheet fax: 01344 853394

Data Products email: [email protected]

Panasonic CS U.K. Document No: 001

Model: KX-P1695

Product Group: Printers Model: KX-P1695

Date: 25/09/98 Revision No: 1.0 Document No: 001

Subject: Does this printer work under any other emulation

Question: Does this printer work under any other emulation.

Answer: This printer has two emulations, Epson and IBM.

When using Epson emulation either the Panasonic driver or the Epson equivalent driver may

be used. The Epson equivalent driver is the Epson LQ-2500.

When using IBM emulation the IBM Proprinter X24 driver must be used.

Emulation may be changed by using the initial set up table which can be entered by holding

down the button whilst powering the printer on. By using the column and row

keys

you will be able to change the printers emulation within the table according to the table

below:

Row Indicator. Column Indicator ( led is on or blinking )

R1 R2 R3 C1 C2 C3 C4 C5 C6

ON ON ON Print current Matrix condition.

ON OFF OFF EPSON (I) EPSON (G) IBM (G1) IBM (G2)

The and switches move the position of the indicator to the new

setting, the switch is used to store the new setting. Press the

switch to exit initial set up mode.

FUNCTION

ROW

COLUMN

SET FUNCTION