Panasonic Projector Accessories ET-PKD75 User manual

Category
Projector mounts
Type
User manual

This manual is also suitable for

1
ET-PKD75
Ceiling Mount Bracket
S P E C F I L E
Description
This ceiling mount bracket is to be used when mounting DLP™-based projectors to the high
ceiling.
Specifications
Vertical correction angle: +5°, -17°
Horizontal correction angle: ±2.5°
Dimensions (W x H x D): 509 x 345 x 343 mm
(20-1/32˝ x 13-9/16˝ x 13-1/2˝)
Weight: 7.5 kg (16.5 lbs)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Digital Light Processing and DLP are trademarks of Texas Instrumets.
Attachment plate . . . . . . . . . . . . . . . .1
Angle adjuster . . . . . . . . . . . . . . . . . .1
Adjuster pole A . . . . . . . . . . . . . . . . .1
Adjuster pole B . . . . . . . . . . . . . . . . .1
Projector mount bracket . . . . . . . . . . .1
Pole fixer . . . . . . . . . . . . . . . . . . . . . .1
Safety fitting . . . . . . . . . . . . . . . . . . . .1
Washer-fitted screws (M6 x 12) . . . . .29
Washer-fitted screws (M4 x 8) . . . . . . .4
Caution:
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has
sufficient strength. Read the enclosed mounting instructions thoroughly before starting.
As of September 2004
Dimensions
unit: mm (inch)
(Dimensions given in inches are approximate.) Note: This illustration is not drawn to scale.
Ø49 (1-15/16˝)
23729
(9-11/32˝)
149
(5-7/8˝)
175
(6-7/8˝)
(1-5/32˝)
438–558
(17-1/4˝–21-31/32˝)
350 (13-25/32˝)
314 (12-3/8˝)
120 54 (2-1/8˝)
(4-23/32˝)
314
(12-3/8˝)
140
(5-1/2˝)
Ø43 (1-11/16˝)
175 (6-7/8˝)
220 (8-21/32˝)
Ø50
(1-31/32˝)
Ø50
(1-31/32˝)
Ø11 (7/16˝)
Parts
The assembled ET-PKD75 with a projector
and the ET-D75LE1 optional lens mounted
Attachment Plate
  • Page 1 1

Panasonic Projector Accessories ET-PKD75 User manual

Category
Projector mounts
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI