Zenitel TMIV-1 User guide

Brand: Zenitel

Model: TMIV-1

Type: User guide

Zenitel TMIV-1 is a mini video intercom system that allows visual and audio communication between two or more parties. It features a high-resolution camera with a wide field of view, enabling clear and detailed video transmission. With its compact design and easy installation options, the TMIV-1 is suitable for various applications, including residential, commercial, and industrial settings. The device's sturdy construction and IP44 ingress protection rating ensure reliable operation even in harsh outdoor conditions.

Mounting Guide

TMIV-1+ Turbine Mini Video Intercom

1 Turbine Mini Video Intercom

This document describes the dimensions, mounting procedure, and camera Field of View of the TMIV-1+ Turbine Mini

Video Intercom. Zenitel takes no responsibility for damages caused by improper or inadequate mounting.

Item Number Type Item Name

1008117010 TMIV-1+ Turbine Mini Video Intercom

1008140020 TA-2 Flush Mount 2-Gang Double-Depth Back Box

1008140030 TA-3 Flush Mount 2-Gang Back Box

1008140320 TA-32 On-Wall Back Box

2 Flush Mount 2-Gang Back Boxes - TA-2 & TA-3

TA-2 TA-3

LIt is recommended to utilize back boxes with weep holes at the bottom.

96 mm / 3.78?

48 mm

25 mm

23 mm

89 mm / 3.50?

96 mm / 3.78?

46 mm

SIDE

22 mm

1.81? 0.98?

0.90?

0.87?

1.89?

48 mm

25 mm

23 mm

46 mm

SIDE

22 mm

96 mm / 3.78?

0.87?

1.81? 0.98?

64 mm / 2.52?

1.89?

0.90?

117 mm 43.5 mm

35 mm

46 mm

89.4 mm

84 mm

71.7 mm

3 Flush Mounting Procedure

1. Mount the 2-gang back box into the wall

2. Fasten the TMIV-1+ intercom to the back box with four #6-32 UNC countersunk-head screws

4 Camera Field of View

Flush Mount 2-Gang Back Box

TMIV-1+ Turbine Mini Video

#6-32 UNC Screws

Date: Dec 2021

A100K12125 [email protected]

DOC NO.

145°

50 cm

190 cm

50 cm

120 cm

109°

Vertical Angle Horizontal Angle

50 cm

317 cm

Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel products are developed and marketed by Zenitel. The company’s Quality Assurance System is certiﬁed to meet

the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter speciﬁcations without notice.

ZENITEL PROPRIETARY. This document and its supplementing elements contain Zenitel or third-party information which is proprietary and conﬁdential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any

To attain the rated ingress

protection of IP44, ush

mounting of TMIV-1+ must only

be done on a surface that is

completely planar, smooth, and

clean. Any surface irregularities

must not exceed 0.5 mm. If this

is not achievable in a reliable

manner, appropriate sealant or

ller should be applied to seal

the gap between the station and

the wall. Optionally, the on-wall