SoundPEATS S5 User guide

Brand: SoundPEATS

Model: S5

Type: User guide

SoundPEATS S5, are wireless earbuds capable of playing music, answering calls, and activating voice assistants. With a single charge, you can enjoy up to 20 hours of playtime, with 5 hours per charge and 3 additional recharges from the charging case. The earbuds automatically power on and pair with each other when removed from the case, and can be manually paired by long-pressing the MFB for 1.5 seconds when powered off. To enter pairing mode, long-press the MFB for 6 seconds.

1 2

Reset

Wearing

English

Control

Power on

Power O

Play/Pause

Volume-

Volume+

Play Previous

Play Next

Answer/Hang up phone

call

Reject phone call

Switch between two calls

Manually enter into pairing

mode

Activate voice assistant

Automatic: Open the charging case, take out the

earbuds, the earbuds will automatically power on

Manual: Long press the MFB for 1.5 seconds in shutdown

status

Automatic: Place the earbuds back into the charging

case.

Manual: Long press the MFB for 10 seconds in working

status.

Double tap MFB

Tap MFB(L) once

Tap MFB(R) once

Press the MFB(L) for 1.5 seconds

Press the MFB(R) for 1.5 seconds

Double tap MFB(L/R)

Press the MFB(L/R for 1.5 seconds

Long press the MFB(L/R )for 2 seconds

Long press the MFB(L/R )for 6 seconds

Triple tap MFB(L/R )

Product Diagram

English

1. Connect to a Type-C charging adapter

charge it.(Charging current does not exceed

1A).

2. When not using for a long time, please

charge it once every three months at least.

Q3: How to charge the charging case?

First use

Please open the lid of the charging case, take out the two earbuds, and tear

o the insulating lm on the earphone charging contacts, then put the

earbuds back into the charging case.

1.Open the charging case, take out the two earbuds, the earbuds will

automatically power on and start to paring with each other. One earbud’s

white LED is on, another one is blinking with white and red light, which

indicates that the earbuds has entered pairing mode.

2. Turn on the bluetooth of your device, and please choose“SOUNDPEATS S5”in

the list to pair, then the earbuds will connect with your device.

SOUNDPEATS S5

Connected

S5 S5

User Guide Gebrauchsanweisung Manual de instrucciones

Mode d'emploi Istruzioni per l'uso 说明使用指南

1. Clear the pairing data from your device.

2. Put both earbuds into the charging case. Make

sure they are in charging status.

3. Then long press the MFB of both earbuds for 10

seconds at the same time until the LED indicator

in both earbuds ash white and red twice. The

reset nish.

1. Identify the le and right earphones. Adjust the earphones to t your ears.

2. Right and wrong way of wearing.

1. The charging case has no power. The earphone will not power o in charging

case when charging case has no power.

2. Make sure the earphone is properly placed in the charging case. Please try to

clean the contact area between the charging box and the earphones with a

so cloth, keep the charging metal piece and pin clean.

Q4: Why does the earphone still connect to the mobile phone after putting it

back into the charging case ?

A single charge not allow the earbuds to last 20 hours. 5 hours playtime per

charge and another 3 recharges by charging case.

Q5: Why is the playtime not as described?

English

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

-- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Changes or modifcations not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

FCC Statement

FCC ID: 2AFTU-DD023 Made in China

Room 1308-1309, Building B, Huihai Square, Chuangye Road,

Longhua District, Shenzhen, China. 518109

[email protected]

www.soundpeatsaudio.com

MANUFACTURER

Shenzhen SoundSOUL Information Technology Company Limited.

Company Qing UG(haftungsbeschränkt)

Address Undinestr. 7, 12203 Berlin Germany

EC REP

Q&A

English

Q1: What does the LED indicator mean when

the earphone is charging?

During the charging, the LED show red

light, it will turn o when full charged.

Q2: What does the LED indicator on the

charging case mean?

During the charging, the indicator light ashes to show the remaining power of the

charging case.

The rst white LED light ashes to show 0-24% remaining power of the charging

case.

The rst white LED light is on and the second LED ashes to show 25%-49%

remaining power.

Two white LED lights are on and the third LED ashes to show 50%-74% remaining

power of the charging case.

Three white LED lights are on and the fourth LED light ashes to show 75%-99%

remaining power of the charging case.

4 lights are all on when full charged.

25% - 49%

0% - 24%

50% - 74%

75% - 100%

100%

1.5s 3x 2x 1x 1.5s 2s2s 3x2x1x

SoundPEATS S5 User guide

SoundPEATS S5 User guide

Related papers

Other documents