2. PDQ
  3. KMS BLE Only Deadbolt

PDQ KMS BLE Only Deadbolt User manual

  • Hello! I've reviewed the provided user manual for the PDQ BLE ONLY Deadbolt. This document contains detailed instructions for installing the deadbolt, including how to handle the latch, cylinder assembly, and battery installation. I'm ready to answer any questions you might have about the installation process or the device itself.
  • How should the latch be installed?
    What do I do with the cylinder assembly?
    How do I orient the tailpiece for a left-hand door?
    How do I orient the tailpiece for a right-hand door?
    What screws should be used to secure escutcheon?
KMS INSTALLATION INSTRUCTION
BLE ONLY DEADBOLT
3. INSTALL GASKET & INSIDE
MOUNTING PLATE
• Install rubber gasket and inside mounting plate
• Secure with (2) pan head screws.
2. INSTALL CYLINDER
ASSEMBLY
• Install cylinder assembly from outside of door.
• If extended, retract deadbolt
Left Hand Door – Rotate tailpiece clockwise until it
stops in the vertical orientation.
Right Hand Door – Rotate tailpiece counter-clockwise
until it stops in the vertical orientation.
Rev0 –5-26-23
1. INSTALL LATCH
• Install latch with cross slot for tailpiece toward
bottom.
• Secure with (2) combo screws.
For Mechanical Concerns:
Phone: 866-874-3662
www.pdqlocks.com
For Mechanical Concerns:
Phone: 866-874-3662
www.pdqlocks.com
BATTERY
COVER
BATTERIES
BATTERY
COVER
BATTERIES
RIGHT
HAND
LEFT
HAND
RIGHT
HAND
LEFT
HAND
5. INSTALL INSIDE TRIM AND
BATTERIES
• Align thumb turn with tailpiece
• Secure escutcheon with (2) short pan head
screws.
• Install batteries and battery cover with pan head
screw.
/