Whitecroft lightning Esprit LED User manual

Category
Outdoor lighting
Type
User manual

Whitecroft Lightning Esprit LED offers a sleek, modern design with high-quality illumination for various applications. Its durable construction, featuring polycarbonate and anodized aluminum, ensures longevity and resistance to harsh conditions. The adjustable beam angle allows for customization of light distribution, making it suitable for both general and accent lighting. With a choice of fixed output or DALI control, you can tailor the light intensity to your specific needs.

Whitecroft Lightning Esprit LED offers a sleek, modern design with high-quality illumination for various applications. Its durable construction, featuring polycarbonate and anodized aluminum, ensures longevity and resistance to harsh conditions. The adjustable beam angle allows for customization of light distribution, making it suitable for both general and accent lighting. With a choice of fixed output or DALI control, you can tailor the light intensity to your specific needs.

SPECIFICATION:
Lamp type: LED
Output: 1100lm /2000lm nominal.
Colour: 3000°K/4000°K - Ra80 (830/840)
Materials: Body: White Polycarbonate
Reflector: Textured specular Anodised Aluminium
Diffuser: Polycarbonate
Control gear: Fixed output / Dali
Emergency: Integral 3hr / COMEPS
Supply: 240v 50Hz AC
Ambient Temperature: 0-25°C
Supply flex: 0.5 - 2.5mm². 10-11mm stripped.
Terminal block type: Push-wire (non-EM) / piano-key (EM)
Ingress protection: IP44 (from below)
Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Telephone +44 (0)870 5 087 087 Facsimile: +44 (0)870 5 084 210
Registered No. 3848973 England Registered Office: As above
GENERAL INFORMATION
A qualified electrician, in accordance with IEE wiring regulations should carry out
connection to mains wiring.
Observe ESD precautions during installation.
This unit must be EARTHED.
Ensure that the rated voltage and frequency requirements are compatible with the
available mains supply.
Cleaning of reflectors and lenses should be carried out using clean, soft and lint
free cloths and anti-static cleaning fluid
Do not carry out high voltage insulation test, i.e. 500/1000v this may damage
internal components.
7. Do not cover luminaire housing with thermally insulating material.
8. The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or similar qualified person
.
9.Batteries used in emergency versions of this luminaire range are replaceable by a
qualified electrician.
TECHNICAL SUPPORT
Telephone: 0161 331 5700
E-mail: technical@whitecroftlight.com
http://www.whitecroftlighting.com/
1.
2.
3.
4.
5.
6.
Installation sheet
PK/ESLINSTSHT August 2021 - Rev E
Esprit LED
ESPRIT LED
Whitecroft Lighting Limited
Bridge DALI terminals as shown if the driver and inverter
share a single DALI pair. Use link wires supplied.
ESLA-IP44
MLA-AGC
ESLA-3
ESLA-IP44C
Accessories
7
Flat IP44 Clear
Flat IP44 Opal
Floating opal ring
Anti-glare attachment
380
160
460
Minimum installation volume
Support the bezel or
reflector to prevent
rotation during
installation or
removal of the
attachments.
99,1
192
Product Dimensions
ESPRIT LED
Whitecroft Lighting Limited
x2 x1
6a 6b
6c
4
200Min
Max 50
Min 1
160Min
Max 50
Min 1
!
O
165
+10
0
CDETAIL C
EM LED notch
10
5
55b 5a
Standard Emergnecy
ESPRIT LED
Whitecroft Lighting Limited
A
DETAIL A
1
[Supply]
DETAIL A
A
1
Fixed output
Dali
3hr EM
Dali EM
[Supply]
2
3
Follow this side for: 3000°K 4000°K
1100lm 2000lm 1100lm 2000lm
Fixed output • •
DALI • •
Fixed output 3hr EM
DALI 3hr EM
Fixed output COMEPS
DALI COMEPS
Follow this side for: 3000°K 4000°K
1100lm 2000lm 1100lm 2000lm
Fixed output
DALI
Fixed output 3hr EM • •
DALI 3hr EM • •
Fixed output COMEPS • •
DALI COMEPS • •
2
3a
3b 3c
+
-
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Whitecroft lightning Esprit LED User manual

Category
Outdoor lighting
Type
User manual

Whitecroft Lightning Esprit LED offers a sleek, modern design with high-quality illumination for various applications. Its durable construction, featuring polycarbonate and anodized aluminum, ensures longevity and resistance to harsh conditions. The adjustable beam angle allows for customization of light distribution, making it suitable for both general and accent lighting. With a choice of fixed output or DALI control, you can tailor the light intensity to your specific needs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI