2. Gianni Industries
  3. GK1300
GK1300

Gianni Industries GK1300 Owner's manual

  • Hello! I've analyzed the product details for GIANNI's GK1300/1350 series Electric Strikes. This document provides information about features such as vertical adjustments, a sliding keeper shim, compatibility with deadbolts up to 1 inch, and field reversibility for fail-safe or fail-secure operation. It also mentions the inclusion of 5 faceplates and endurance testing. I'm ready to answer your questions about these electric strikes.
  • What type of locksets are these electric strikes designed for?
    What adjustments are supported?
    Are these strikes field reversible?
    How many faceplates are included?
The GK1300/1350 series ANSI electric strike is designed for use with heavy duty
mortise locksets and cylindrical locksets. It comes with five different faceplates and
can be easily installed in aluminum, metal or wood door frames. An optional plug-in
latch monitor is also available and can be easily added in the field.
Standard Features
GK1300/1350 Series
Vertical adjustments allow for alignment
Sliding keeper shim design for up to 1/8”
Field reversible for fail-safe or fail-secure
Non-handed design fits either right or
Includes 5 brushed stainless steel faceplates (US32D)
Accommodates deadbolts up to 1”
Electric Strikes
with a wide variety of mortise locks with
offset latches
(3mm) adjustment for misaligned frames
left handed doors
Optional latch monitor SW1300 indicates when door
is latched. It can be mounted in the strike cavity to
correspond to latch position.
Strong, Durable Strike in One Kit Solution
G
G
G
G
G
G
G
G
E
E
E
E
E
E
E
M
M
M
MM
M
M
M
M
E
E
E
E
E
EE
R
SECURITY
Patents, Approvals, and Listings
UL 1034 burglary resistant listed : BP10269
Endurance rating 250,000 cycles UL tested,
1,000,000 cycles factory tested
SW1300 Latch Monitor (Option)
Tel: +886-2-2267-7986 Fax: +886-2-2267-9876
www.gianni.com.tw inquir[email protected]
GIANNI INDUSTRIES, INC.
UL 294 Access Control System listed: BP10269
R
4” (116.9mm)
(41.5mm)
1
13/16
” (46.7mm)
1
3/8
” (35mm)
3
3/8
” (85mm)
3
5/16
” (84.5mm)
1
5/8
”
Faceplate Dimensions
11/16"(18mm)
27/8"(73mm)
EF GH
Note: If it is necessary to cut a hole in the frame, mounting tabs maybe required to strengthen the installation.
Deadbolt Latch Installation Latchbolt Installation
1
1
2
1
2
Strike Dimensions
GK1300 is field reversible for
fail-safe or fail-secure by
changing the position of screws.
“Fail-Secure”
(Power to Open) “Fail-Safe”
(Power to Lock)
4
7/8
” (124mm)
2
1/4
” (58mm) 1
1/18
” (28mm)
1
1/2
”
(38mm)
1
1/4
”
(32mm)
4
7/8
” (124mm)
1
5/16
”
(34mm)
11/16” (18mm) 2
13/16
” (72mm)
1
1/4
”
(32mm)
4
7/8
” (124mm)
4
7/8
” (124mm)
4
7/8
” (124mm)
1
3/4
”
(44mm)
1
1/4
”
(32mm)
1
1/4
”
(32mm)
1
1/4
”
(32mm)
1
1/18
” (29mm)
1
1/16
” (27mm)
1
9/16
” (40mm) 1
9/16
” (40mm)
7/8” (22mm)
3
1/8
” (79mm)
I
Models Latch
Throw
Optional
Plug-in
Latch
Monitor
(SW1300)
Static
Strength
(lbs)
Dynamic
Strength
(ft-lbs)
Reversible
Fail-Safe or
Fail-Secure
Body
Construction
GK1300 1”
(25 mm)
GK1350
Voltage
(VDC)
Stainless steel
Zinc alloy
GK1300/1350 Series Electric Strikes
33
70
12, 24, or
dual 12/24 1000
1500
Trim
Plate
Fail-Secure
when " 2"
faces the keeper
side of strike
Fail-Safe when
"1" faces the
keeper side of
strike
Changing Fail-Safe / Fail-Secure
GK1350 is field reversible for fail-safe or
fail-secure by reversing the round screw
as shown.
R
SECURITY
Tel: +886-2-2267-7986 Fax: +886-2-2267-9876
www.gianni.com.tw inquir[email protected]
GIANNI INDUSTRIES, INC.
12, 24, or
dual 12/24
Warranty
The proudct is warranted against defects in material and workmanship while used in normal service for a period of 3 years from the date of sale to the
original client. The GEM policy is one of continual development and improvement; therefore GEM reserves the right to change specifications without
notice.
Stainless steel
701500
12, 24, or
dual 12/24
GK1350-ST
Keeper
Keeper
R
R
SECURITY
1”
(25 mm)
1”
(25 mm)
Current
Draw
250mA/12VDC or 150mA/24VDC
300mA/12VDC, 150mA/24VDC
250mA/12VDC or 150mA/24VDC
300mA/12VDC, 150mA/24VDC
250mA/12VDC or 150mA/24VDC
300mA/12VDC, 150mA/24VDC
/