Hobart LXe User guide

Hobart
Brand
Hobart
Model
LXe
Type
User guide

Hobart LXe is a commercial-grade dishwashing machine designed to provide efficient and hygienic dishwashing results. With its advanced features, it's ideal for restaurants, cafes, and other foodservice establishments. Here are some of its key capabilities:

  • Automatic Operation: Hobart LXe simplifies your dishwashing process with its automatic operation. Simply load the dishes, select the desired cycle, and the machine takes care of the rest, from washing to rinsing and sanitizing.

  • Chemical Level Monitoring: The machine monitors the levels of detergent and rinse aid, alerting you when replenishment is needed to ensure consistent cleaning performance.

Hobart LXe is a commercial-grade dishwashing machine designed to provide efficient and hygienic dishwashing results. With its advanced features, it's ideal for restaurants, cafes, and other foodservice establishments. Here are some of its key capabilities:

  • Automatic Operation: Hobart LXe simplifies your dishwashing process with its automatic operation. Simply load the dishes, select the desired cycle, and the machine takes care of the rest, from washing to rinsing and sanitizing.

  • Chemical Level Monitoring: The machine monitors the levels of detergent and rinse aid, alerting you when replenishment is needed to ensure consistent cleaning performance.

DAILY OPERATION:
1
1
3
5
4
6
3
2
6
BEFORE START-UP
Make sure all components
are clean and installed
properly in the machine.
Note: See Step 6 under daily cleaning
for assembly instructions.
DRAIN THE MACHINE
Press POWER button
and leave the door closed
for the water to drain.
© 2022 Hobart 701 S. Ridge Avenue, Troy, OH 45373 | Phone: (937) 332-3000 | hobartcorp.com | Resource Center: hobartcorp.com/lxetraining F40947 04/22
CHECK CHEMICAL
BOTTLE LEVELS
Make sure you have
sucient chemicals for
machine operation.
Note: On LXeR models, machine
will autoprime on start-up.
CLOSE THE DOOR
AND PRESS THE
POWER BUTTON
FILLFILL and wash tem perature
will be displayed when
ma chine is filling.
WARMING UPWARMING UP
& warming up icon are
displayed when booster is preheating
on LXeH and LXeR models. This preheat
could take up to 15 minutes.
WIPE DOWN MACHINE
Interior and exterior
with a damp cloth.
DO NOT USE STEEL
WOOL, A SCOURING PAD
OR ABRASIVE MATERIAL
TO CLEAN THE MACHINE.
OPEN THE DOOR AND
REMOVE THE RACK
Allow the ware enough
time to dry before storing.
2
MACHINE WILL TURN
OFF AFTER DRAINING
At the end of the
draining cycle, the
screen will be blank.
REMOVE UPPER AND
LOWER WASH/RINSE
ARMS
On LXeR, squeeze the two side
buttons on the center hub;
pull up (or down) to remove
arm. On LXeH/C, use hand
screw to remove the arms. Note:
Make sure all wash/rinse nozzles are free from obstructions
to ensure proper water flow.
GET THE MOST OUT OF YOUR DISHWASHER
PRE-SCRAP DISHES
Make sure to remove large
food particles and debris
before loading ware into
the machine.
DO NOT
OVERLOAD RACK
Do not stack racks and follow
proper racking guidance.
USE ONLY COMMERCIAL
DETERGENTS AND
SANITIZERS
Do not use any other chemicals
with the dishmachine.
DELIME THE
MACHINE
Deliming the
machine is required
when you see clear signs of
lime. The unit will alert you
when deliming is required.
When prompted, follow the
instructions on the display.
Note: Delime instructions will
vary based on model.
4
OPEN THE DOOR AND
SLIDE THE RACK INTO
THE MACHINE
READYREADY is displayed on
the screen.
The screen will read READYREADY
when the cycle is complete.
5
CLOSE THE DOOR AND
PRESS WASH.
WASHWASH, icon & wash
temperature displayed
during wash cycle.
RINSERINSE, icon & rinse
temperature displayed
during rinse cycle
Note: On LXeR models, a condensing
cycle will be ran for 30 seconds.
REMOVE AND CLEAN
ALL STRAINERS
Be sure to remove coarse
and fine strainers. Remove
any heavy food residues
from strainer pans. Once
clean, reposition all
components.
REPOSITION ALL
STRAINERS AND
WASH/RINSE ARMS
Leave door slightly open to
allow machine interior
to air out overnight.
LXe WAREWASHER | Daily Operation & Cleaning Guide
SCAN TO WATCH
INSTRUCTIONAL
VIDEO hobartcorp.com/lxetraining
SCAN TO WATCH
DELIME VIDEO
hobartcorp.com/lxetraining
DAILY CLEANING: hobartcorp.com/lxetraining
SCAN TO
WATCH DAILY
CLEANING VIDEO
PROPER RACKING
WILL PROVIDE THE
BEST CLEANING RESULTS.
SCAN TO
WATCH
2-LEVEL
VIDEO
OPTIONAL SECOND LEVEL RACK KIT
If equipped with the optional second level kit,
refer to the following instructions:
1 Ensure the rack guide is in place.
2 Only use the white wire rack on the
upper level guide.
3 Only load dishes and silverware on the
upper rack.
4 Lower rack accommodates all ware types.
5 Be sure no obstructions interfere with the wash and rinse arms.
Note: Failing to use the Hobart second level rack kit to wash two levels could compromise
wash performance and damage the machine.
2
3
4
5
1
  • Page 1 1

Hobart LXe User guide

Hobart
Brand
Hobart
Model
LXe
Type
User guide

Hobart LXe is a commercial-grade dishwashing machine designed to provide efficient and hygienic dishwashing results. With its advanced features, it's ideal for restaurants, cafes, and other foodservice establishments. Here are some of its key capabilities:

  • Automatic Operation: Hobart LXe simplifies your dishwashing process with its automatic operation. Simply load the dishes, select the desired cycle, and the machine takes care of the rest, from washing to rinsing and sanitizing.

  • Chemical Level Monitoring: The machine monitors the levels of detergent and rinse aid, alerting you when replenishment is needed to ensure consistent cleaning performance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents