dji AeroScope Stationary Unit User guide

DJI AeroScope Offline Update Guide

The firmware version of DJI AeroScope Stationary Unit and DJI AeroScope Mobile can be

updated using DJI Assistant 2 for AeroScope. Contact DJI Support for assistance to download

the DJI Assistant 2 for AeroScope installation file.

Follow the instructions below to update the firmware using DJI Assistant 2.

1. Go to the official DJI Download page of AeroScope

(https://www.dji.com/downloads/products/aeroscope), and download the latest offline

firmware package on your computer.

2. Install DJI Assistant 2 for AeroScope on your computer.

3. Launch DJI Assistant 2 for AeroScope.

4. Connect your computer and the AeroScope unit using an Ethernet cable. The

corresponding device icon of the AeroScope unit will be displayed when connected.

5. Select the device icon and click on Firmware Updates on the left panel.

6. Select the offline firmware package downloaded in step one, and click to update.

7. When the updated successfully a prompt will appear, confirming the update is completed.