2. AHARON
  3. 543
543

AHARON 543 Operating instructions

  • Hello! I have analyzed the provided document, which is a set of instructions for the CANBUS wire harness, outlining connection steps for various components, including H7 feeds, CANBUS cancellers, HID ballasts, and power/ground sources. I'm ready to answer your questions about this device and its installation. Please feel free to ask!
  • What is connector labeled as unused?
    Where do I connect the H7 feed from the car?
    Where are CANBUS cancellers connected?
Ahar o n
Ahar o n
Instructions
CANBUS
WIRE HARNESS
WWW.RETROFITLAB.COM
1. CONNECT TO H7 FEED FROM CAR
2. CONNECT TO CANBUS CANCELLER
3. CONNECT TO HID BALLAST
4. CONNECT TO 12v+
(plus)
SOURCE OF BATTERY
5. CONNECT TO -
(ground)
OF BATTERY / CHASSIS
6. CONNECT HID BALLAST TO HID BULB CONNECTORS
1 1
3 3
4
5
2 2
6 6
Note:
This connector can be left
disconnected - it is unused
/