2. Rapsodo
  3. HITTING 2.0
HITTING 2.0

Rapsodo HITTING 2.0 User guide

  • Hello! I'm here to help with your Rapsodo Hitting Monitor 2.0. I've reviewed the Quick Start Guide which includes steps for setting up the device, pairing the app, calibrating the monitor and understanding the indicator lights. Feel free to ask any questions you have about the guide or your device.
  • What are the app requirements for the Rapsodo Hitting Monitor?
    What is the default account setting?
    How far should the tank be placed from home plate?
    What does 'No Internet Connection' message mean?
    What should I do when I see red light on the monitor?
1. Create a coach account
at cloud.rapsodo.com
2. download
'Rapsodo hıttıng' app
3. set up the monıtor
and the rce
4. paır the rce
and the app
This will be your username
and password to login
to both the cloud
and applications
The ’’Guest’’ account is
the default setting and has
limited data. To track hits
and have complete data
access be sure to create
and activate a player
profile
Go to the Apple App
Store and search for
Rapsodo HITTING
Using the provided
measuring tape, place the
front of the tank 14' from
the FRONT of home plate
Turn on both the RCE and
Monitor and connect to
Rapsodo WiFi in your
device settings
!When connected to the
Rapsodo WiFi
the iPad will say
‘’No Internet Connection’’
App Requirements:
iOS 10.3 or later
iPad Air 2 or newer
14’
5. calıbratıon DISPLAYs
Connect the RCE to the
application and calibrate
the monitor. To calibrate
the monitor place a tee,
bat or person on the
center of home plate.
The red line in the
azimuth view should go
directly down the
middle of home plate
!Angles should be as close to
90 degrees and 20 degrees
as possible For additional user information download the
HITTING 2.0 user manual at
www.rapsodo.com/downloads
www.rapsodo.com
[email protected]
MAINTENANCE
RCE and Monitor
Connected
Ready to
record data
Data Processing
RCE and monitor connected
to application, needs
Calibrated or on ‘Pause Mode’
Battery Power
Connection to App
Monitor
RCE switched off
and charging
Warning for low battery,
please recharge monitor
RCE turned on, not
connected to app
and monitor
RCE turned on, connected to
app but not the monitor
HITTING 2.0
QUICK START GUIDE
The monitor and RCE
must be charged
separately to ensure a
complete charge for
each device.
BLUE
Processing
data (wait for
green light
to hit again)
GREEN
Data ready,
monitor ready
RED
Not ready
RED
Not connected
to RCE, Waiting
for USB Sync
GREEN
Successfully
Connected to
RCE through
USB
AMBER
Charging
(switched off)
GRAY
Off
USB Cables Charger
Federal Communication
Commission (FCC)
Interference Statement
The FCC Interference
Statement can be found
on our website,
www.rapsodo.com/fcc
/