Rapsodo PITCHING 2.0 User guide

PITCHING 2.0
Brand
Rapsodo
Model
PITCHING 2.0
Type
User guide

Rapsodo PITCHING 2.0 is a baseball and softball training tool that helps players analyze their pitching performance. It consists of a monitor and an RCE (radar cross-section enhancer) that work together to accurately measure a pitcher's velocity, spin rate, and release point. The device connects to an app on a compatible iOS device, allowing players to track their progress and receive personalized feedback.

Rapsodo PITCHING 2.0 is a baseball and softball training tool that helps players analyze their pitching performance. It consists of a monitor and an RCE (radar cross-section enhancer) that work together to accurately measure a pitcher's velocity, spin rate, and release point. The device connects to an app on a compatible iOS device, allowing players to track their progress and receive personalized feedback.

1. Create a coach account
at cloud.rapsodo.com
2. download
'Rapsodo pıtchıng' app
3. set up the monıtor
and the rce
4. paır the rce
and the app
This will be your username
and password to login
to both the cloud
and applications
Using the provided
measuring tape, place the
front of the tank 15’6”
from the FRONT
of home plate
The ’’Guest’’ account is the
default setting and has
limited data. To track pitches
and have complete data
access be sure to create
and activate a player
profile
Go to the Apple App
Store and search for
Rapsodo PITCHING 2.0
Turn on both the RCE and
Monitor and connect to
Rapsodo WiFi in your
device settings
!When connected to the
Rapsodo WiFi
the iPad will say
‘’No Internet Connection‘’
App Requirements:
iOS 10.3 or later
iPad Air 2 or newer
15’6’’
5. calıbratıon DISPLAYs
Connect the RCE to the
application and calibrate
the monitor. To calibrate
the monitor have a
person stand on the
center of the pitching
rubber.
The red line in the
azimuth view should
go directly down the
middle of the pitching
rubber
!Angles should be as close to
0 degrees and 14 degrees
as possible For additional user information download the
PITCHING 2.0 user manual at
www.rapsodo.com/downloads
www.rapsodo.com
[email protected]
BLUE
Processing
data (wait for
green light
to hit again)
GREEN
Data ready,
monitor ready
RED
Not ready
RED
Not connected
to RCE, Waiting
for USB Sync
GREEN
Successfully
Connected to
RCE through
USB
AMBER
Charging
(switched off)
GRAY
Off
RCE and Monitor
Connected
Ready to
record data
Data Processing
RCE and monitor connected
to application, needs
Calibrated or on ‘Pause Mode’
Battery Power
Connection to App
Monitor
RCE switched off
and charging
Warning for low battery,
please recharge monitor
RCE turned on, not
connected to app
and monitor
RCE turned on, connected to
app but not the monitor
PITCHING 2.0
QUICK START GUIDE
MAINTENANCE
The monitor and RCE
must be charged
separately to ensure a
complete charge for
each device.
USB Cables Charger
Federal Communication
Commission (FCC)
Interference Statement
The FCC Interference
Statement can be found
on our website,
www.rapsodo.com/fcc
  • Page 1 1
  • Page 2 2

Rapsodo PITCHING 2.0 User guide

PITCHING 2.0
Brand
Rapsodo
Model
PITCHING 2.0
Type
User guide

Rapsodo PITCHING 2.0 is a baseball and softball training tool that helps players analyze their pitching performance. It consists of a monitor and an RCE (radar cross-section enhancer) that work together to accurately measure a pitcher's velocity, spin rate, and release point. The device connects to an app on a compatible iOS device, allowing players to track their progress and receive personalized feedback.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents