Delta DS20 User guide

  • Hello! I've reviewed the user manual for the Delta Charger DS20_v1.1. This manual provides instructions on connecting to the charger, setting up the MIB Browser, and how to get and change the device's serial number. I'm ready to answer any specific questions you may have based on the document.
  • What is the default IP address of the charger?
    How do I find the charger's IP address if I'm not sure?
    What is the Read/Write Community for MIB Browser setup?
Write serialNumber by Mib Browser
DS20_v1.1
Delta Confidential
Download and Install MIB Browser
2
https://www.ireasoning.com/download.shtml
Choose free personal edition
Delta Confidential
Connect PC to charger via eth port
3
Connect RJ45 between DC Wallbox and computer
BA CSU
RJ45
Delta Confidential
Setup the PC
4
Connect RJ45 between DC Wallbox and computer
Default IP of DC Wallbox is 192.168.1.10
If you are not sure about the IP of charger, click the 2 buttons on the panel of
charger at the same time and check the information shown on LCM
Computer’s IP should be under same domain of DC Wallbox. Ex. 192.168.1.1
Delta Confidential
Start and setup MIB Brower
5
1. The default charger
IP is 192.168.1.10
2. Click “Advanced”
button
3. Set the Read/Write Community
as “Delta”
4. Click OK
Delta Confidential
Get the present serial number
6
1. Key in the serial number OID
.1.3.6.1.4.1.6785.1.8.1.3.0 2. Choose Get
3. Check the value
Delta Confidential
Write your serial number
7
1. Key in the serial number OID
.1.3.6.1.4.1.6785.1.8.1.3.0 2. Choose set
3. Choose OcterString
4. Fill in the serial number
5. Click OK
Delta Confidential
Check the result
8
1. Wait a second and check the succeeded widow popped
Smarter. Greener. Together.
To learn more about Delta, please visit www.deltaww.com.
/