2. Marley
  3. Open Coil Electric Duct Heater
Open Coil Electric Duct Heater

Marley Open Coil Electric Duct Heater Operating instructions

  • Hello! I have reviewed the product details for the BERKO Electric Duct Heater Open Coil. This document outlines key features such as its UL and ETL listing for standalone use, flip-able design, and derated heating coils, as well as various options and accessories. I'm ready to assist with any questions you may have about the heater.
  • What is the maximum width of the heater?
    What does 'Flip-Able design' mean?
    What is the standard watt density?
KEY FEATURES
nUL and ETL Listed for use as a standalone heater
nFlip-Able design, airow in any direction, designed for zero clearance
nStandard Watt density of 30 kW/sqft
nDerated Heating Coils improve heater element life and nuisance
tripping
nMax width of 144” and max height of 120”
nVariable CFM requirement based on inlet air temp
nConvenient online quoting through updated Congurator; saves time
and money
OPTIONS & ACCESSORIES
nPrecise solid state SSR /SCR Control
nElectronic sequential 12 Step Controller
nNEC compliant Disconnect Switch
nIntegrated 24V Transformer eliminates control wire runs
nPower Fusing is available for less than 48A, required for over 48A
nAirow Switch is an air pressure device designed to disable the
heater when the system has no or low airow
nFan Interlock, Time Delay, Pilot Lights, Vapor Barrier, Dust Tight,
VFC, A-Wire, Wall Thermostat, Duct Probe Sensors and more
WALL HEATERS
www.berkomep.com
For Technical Services, Call 800-642-4328
BFLY_OPENDUCT_0921
UNIT HEATERS
IDEAL SPACES
nOce Buildings
nRetail Stores
nWarehouses
nSchools
nHotels
nHospitals
ELECTRIC DUCT HEATER
OPEN COIL
FROM DATE OF SHIPMENT
MONTH
WA RRANTY
WORKMANSHIP
18
/