Juniper JXU-16GE-TX-S Datasheet

Category
Network switch modules
Type
Datasheet

This manual is also suitable for

DATASHEET
1
Product Description
Juniper Networks
®
Ethernet Universal Physical Interface Modules (UPIMs) are a set of
interface modules shared between the Juniper Networks SSG Series Secure Services
Gateways including the SSG140, SSG320M, SSG350M, SSG520, SSG550M, and the
Juniper Networks J Series Services Routers including the J2320, J2350, J4350, and J6350.
These modules implement the full set of Layer 37 services offered in ScreenOS and
Juniper Networks Junos
®
operating system, and alternatively implement Layer 2 Ethernet
switching for connecting local servers and PCs to the network.
Four UPIM models are available:
1-port 100/1000 Ethernet with a small form-factor pluggable transceiver (SFP) slot.
You choose from a variety of SFPs to implement 100 Mbps or 1 Gbps Ethernet.
6-port Gigabit Ethernet with SFP slots. You choose from a wide variety of SFPs to
implement different types of fiber optic or copper interfaces. The SFPs are sold
separately from the module.
8-port 10/100/1000 copper Ethernet.
16-port 10/100/1000 copper Ethernet. This module is double the height of the standard
PIM, so it requires two vertically adjacent PIM slots in the chassis.
Architecture and Key Components
The Ethernet UPIMs are highly flexible interfaces that give the network designer the tools
to solve a wide variety of networking problems.
Metro Ethernet WAN Links
The 1-port 100/1000 Ethernet SFP interface is ideal for connecting to a Metro Ethernet
service with a variety of fiber-optic SFPs. This interface allows you to deploy 100 Mbps
service today and upgrade to 1 Gbps simply by replacing the SFP.
Network Segmentation
The Ethernet UPIMs can be used to subnet or segment network traffic by configuring
each Ethernet port as a separate routed network or subnet. This localizes broadcast and
multicast traffic to a local segment and allows different security policies to be applied to
each subnet.
Product Overview
The Ethernet Universal Physical
Interface Modules oer high densities
of 10/100/1000 copper Ethernet or
fiber Gigabit Ethernet ports. These
ports oer the rich set of Layer 27
services available via Juniper Networks
ScreenOS soware on the Juniper
Networks SSG Series Secure Services
Gateways, or Junos operating system on
the Juniper Networks J Series Services
Routers.
ETHERNET UNIVERSAL
PHYSICAL INTERFACE
MODULES
2
Security Zones
Many organizations need to improve internal security and keep
critical information private within departments. At the same time,
they need to provide guest access and protect local resources. The
Ethernet UPIMs give the network designer the extra Ethernet ports
necessary to implement security zones for departmental access.
Local Workgroups
The network designer can use the Ethernet switching capability
of the Ethernet UPIMs to create local workgroups. Integrating
Layer 2 switching into the SSG Series or J Series saves space
and simplifies management by using a single user interface to
configure the switch and the SSG Series or J Series router.
Features and Benefits
Table 1: Ethernet UPIM Features and Benefits
FEATURE FEATURE DESCRIPTION BENEFIT
8- or 16-port copper Ethernet and 1- or
6-port SFP gigabit ethernet modules
Provides Gigabit Ethernet connectivity
Flexible for various applications, including multiport
copper or fiber applications
Provides current or new infrastructure in the local
site and ports for future expansion
Fits in PIM or enhanced PIM slots UPIMs for use in regular PIM or enhanced PIM high-
speed slots
Increases performance in the enhanced PIM slots
in the SSG500 line and J4350/J6350, while also
providing connectivity and functionality in all PIM
slots in all supported platforms
High-density Ethernet connectivity Provides additional Ethernet ports in security/
routing devices
Increases deployment flexibility and cost
eectiveness for branch and midrange routing
and/or security platforms
Local switching Provides switching and broadcast across ports
in the card (soware release and configuration
dependent)
Integrates switching into high-performance
branch oce and midrange secure routing
platforms to reduce operational costs and
consolidate the number of networking devices in
the branch oce or regional site
Product Options
The list of available SFP modules for the Gigabit Ethernet with SFP slots is shown in theOrdering Information” section.
Table 2: Supported Platforms
PART NUMBER SSG140, SSG320M, SSG350M,
SSG520M, SSG550M
J2320, J2350, J4350, J6350
JXU-1SFP-S Yes Yes
JXU-6GE-SFP-S Yes Yes
JXU-8GE-TX-S Yes Yes
JXU-16GE-TX-S Yes Yes
8-PORT 10/100/1000
COPPER ETHERNET
6-PORT GIGABIT
ETHERNET
16-PORT 10/100/1000 COPPER
ETHERNET
1-PORT 100/1000 SFP GIGABIT
ETHERNET
3
Environmental
Operating temperature: 32° to 104° F (0 to 40° C)
Storage temperature: -40° to 15 F (-40 to 7 C)
Relative humidity: 5% to 90% noncondensing
Safety
CAN/CSA-C22.2 No.60950/UL 60950 Third Edition, Safety of
Information Technology Equipment
EN 60950 (2000) Third Edition—Safety of Information
Technology Equipment
EMC
FCC Part 15 Class A
EN 55022 Class A
AS/NZS 3548 Class A
VCCI Class A
Immunity
EN-61000-4-2 Electrostatic Discharge (ESD)
EN-61000-4-3 Radiated Immunity
EN-61000-4-4 EFT
EN-61000-4-5 Surge
EN-61000-4-6 Low Frequency Common Immunity
Juniper Networks Services and Support
Juniper Networks is the leader in performance-enabling services
and support, which are designed to accelerate, extend, and
optimize your high-performance network. Our services allow
you to bring revenue-generating capabilities online faster so
you can realize bigger productivity gains and faster rollouts of
new business models and ventures. At the same time, Juniper
Networks ensures operational excellence by optimizing your
network to maintain required levels of performance, reliability, and
availability. For more details, please visit www.juniper.net/us/en/
products-services.
Ordering Information
UPIM Part Numbers
PART NUMBER DESCRIPTION
JXU-1SFP-S 1-port SFP 100 Mbps or Gigabit Ethernet
Universal PIM (SFP sold separately)
JXU-6GE-SFP-S 6-port SFP Gigabit Ethernet Universal PIM (SFPs
sold separately)
JXU-8GE-TX-S 8-port Gigabit Ethernet 10/100/1000 Copper
Universal PIM
JXU-16GE-TX-S 16-port Gigabit Ethernet 10/100/1000 Copper
Universal PIM
SFP Modules for the 1-Port and 6-Port UPIMs
PART
NUMBER
DESCRIPTION SUPPORTED
ON JXU-1SFP-S
SUPPORTED ON
JXU-6GE-SFP-S
JX-SFP-
1GE-LX
SFP 1000BASE-LX Gigabit
Optical Transceiver SFP
Module
Yes Yes
JX-SFP-
1GE-SX
SFP 1000BASE-SX Gigabit
Optical Transceiver SFP
Module
Yes Yes
JX-SFP-
1GE-T
SFP 1000BASE-T Gigabit
Copper Transceiver SFP
Module
Yes Yes
JX-SFP-
1FE-FX
SFP 100BASE-FX Optical
Transceiver SFP Module
Yes No
Operating System Versions
PART NUMBER SCREENOS VERSION JUNOS OS VERSION
JXU-1SFP-S 6.0r2 8.4
JXU-6GE-SFP-S
JXU-8GE-TX-S
JXU-16GE-TX-S
6.0 8.3
Note: These are the minimum operating system versions that
support the UPIMs. Some features may require later versions.
Specifications
Table 3: Specifications
1-PORT ETHERNET UPIM (JXU-
1SFP-S)
6-PORT ETHERNET UPIM (JXU-
6GE-SFP-S)
8-PORT ETHERNET UPIM (JXU-8GE-
TX-S)
16-PORT ETHERNET UPIM (JXU-
16GE-TX-S)
Connector 1 SFP cage (SFP sold
separately)
6 SFP cages (SFPs sold
separately)
8 RJ-45 16 RJ-45
Medium-dependent
interface
(MDI/MDI-X)
N/A N/A Auto-correcting
MDI/MDI-X
Auto-correcting
MDI/MDI-X
Ethernet speeds 100 Mbps or 1 Gbps 1 Gbps 10/100/1000 Mbps,
autosensing
10/100/1000 Mbps,
autosensing
Duplex Auto-negotiation or
manual setting for duplex
Auto-negotiation or manual
setting for duplex
Auto-negotiation or
manual setting for duplex
Auto-negotiation or manual
setting for duplex
PIM slots required* One PIM or enhanced
PIM slot
One PIM or enhanced
PIM slot
One PIM or enhanced
PIM slot
Double-height PIM requires
two vertically adjacent PIM or
enhanced PIM slots
LEDs Link and activity Link and activity Link and activity Link and activity
Dimensions
(W x H x D)
5.45 x 0.63 x 6.5 in
(13.8 x 1.6 x 16.5 cm)
5.45 x 0.63 x 6.5 in
(13.8 x 1.6 x 16.5 cm)
5.45 x 0.63 x 6.5 in
(13.8 x 1.6 x 16.5 cm)
6.4 x 1.2 x 7.8 in
(16.2 x 3 x 19.7 cm)
Weight 8.6 oz (245 g) 8.2 oz (230 g) 8.6 oz (245 g) 11.6 oz (330 g)
Note: *Enhanced PIM slot is recommended for higher performance.
4
1000196-004-EN Dec 2010
Copyright 2010 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos,
NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other
countries. All other trademarks, service marks, registered marks, or registered service marks are the property of
their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper
Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
EMEA Headquarters
Juniper Networks Ireland
Airside Business Park
Swords, County Dublin, Ireland
Phone: 35.31.8903.600
EMEA Sales: 00800.4586.4737
Fax: 35.31.8903.601
APAC Headquarters
Juniper Networks (Hong Kong)
26/F, Cityplaza One
1111 King’s Road
Taikoo Shing, Hong Kong
Phone: 852.2332.3636
Fax: 852.2574.7803
Corporate and Sales Headquarters
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, CA 94089 USA
Phone: 888.JUNIPER (888.586.4737)
or 408.745.2000
Fax: 408.745.2100
www.juniper.net
Printed on recycled paper
To purchase Juniper Networks solutions,
please contact your Juniper Networks
representative at 1-866-298-6428 or
authorized reseller.
About Juniper Networks
Juniper Networks is in the business of network innovation. From
devices to data centers, from consumers to cloud providers,
Juniper Networks delivers the software, silicon and systems that
transform the experience and economics of networking. The
company serves customers and partners worldwide. Additional
information can be found at www.juniper.net.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Juniper JXU-16GE-TX-S Datasheet

Category
Network switch modules
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI