Juniper Networks J2350 User manual

J2320, J2350, J4350, and J6350 Services Router

Getting Started Guide

Release 9.2

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Part Number: 530-025360-01, Revision 1

domain.

This product includes FreeBSD software developed by the University of California, Berkeley, and its contributors. All of the documentation and software

Cornell University and its collaborators. Gated is based on Kirton’s EGP, UC Berkeley’s routing daemon (routed), and DCN’s HELLO routing protocol.

Juniper Networks, the Juniper Networks logo, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other

countries. JUNOS and JUNOSe are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service

marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or

otherwise revise this publication without notice.

Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed

to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347,

6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Release 9.2

Revision History

August 2008 —Revision 1

The information in this document is current as of the date listed in the revision history.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. The JUNOS software has no known time-related limitations through the year

2038. However, the NTP application is known to have some difficulty in the year 2036.

SOFTWARE LICENSE

The terms and conditions for using this software are described in the software license contained in the acknowledgment to your purchase order or, to the

extent applicable, to any reseller agreement or end-user purchase agreement executed between you and Juniper Networks. By using this software, you

indicate that you understand and agree to be bound by those terms and conditions. Generally speaking, the software license restricts the manner in which

you are permitted to use the software and may contain prohibitions against certain uses. The software license may state conditions under which the license

is automatically terminated. You should consult the license for further details. For complete product documentation, please see the Juniper Networks Web

site at www.juniper.net/techpubs.

ii ■

End User License Agreement

READ THIS END USER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE. BY DOWNLOADING,

INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS CONTAINED HEREIN, YOU (AS CUSTOMER

OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO BIND THE CUSTOMER) CONSENT TO BE BOUND BY THIS

AGREEMENT. IF YOU DO NOT OR CANNOT AGREE TO THE TERMS CONTAINED HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE SOFTWARE,

AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS.

1. The Parties. The parties to this Agreement are Juniper Networks, Inc. and its subsidiaries (collectively “Juniper”), and the person or organization that

originally purchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the Software (“Customer”) (collectively, the “Parties”).

2. The Software. In this Agreement, “Software” means the program modules and features of the Juniper or Juniper-supplied software, and updates and

releases of such software, for which Customer has paid the applicable license or support fees to Juniper or an authorized Juniper reseller. “Embedded

Software” means Software which Juniper has embedded in the Juniper equipment.

3. License Grant. Subject to payment of the applicable fees and the limitations and restrictions set forth herein, Juniper grants to Customer a non-exclusive

and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the following use restrictions:

a. Customer shall use the Embedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased by Customer from

Juniper or an authorized Juniper reseller.

b. Customer shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing units for which Customer

has paid the applicable license fees; provided, however, with respect to the Steel-Belted Radius or Odyssey Access Client software only, Customer shall use

such Software on a single computer containing a single physical random access memory space and containing any number of processors. Use of the

Steel-Belted Radius software on multiple computers requires multiple licenses, regardless of whether such computers are physically contained on a single

chassis.

c. Product purchase documents, paper or electronic user documentation, and/or the particular licenses purchased by Customer may specify limits to

Customer’s use of the Software. Such limits may restrict use to a maximum number of seats, registered endpoints, concurrent users, sessions, calls,

connections, subscribers, clusters, nodes, realms, devices, links, ports or transactions, or require the purchase of separate licenses to use particular features,

functionalities, services, applications, operations, or capabilities, or provide throughput, performance, configuration, bandwidth, interface, processing,

temporal, or geographical limits. In addition, such limits may restrict the use of the Software to managing certain kinds of networks or require the Software

to be used only in conjunction with other specific Software. Customer’s use of the Software shall be subject to all such limitations and purchase of all applicable

licenses.

d. For any trial copy of the Software, Customer’s right to use the Software expires 30 days after download, installation or use of the Software. Customer

may operate the Software after the 30-day trial period only if Customer pays for a license to do so. Customer may not extend or create an additional trial

period by re-installing the Software after the 30-day trial period.

e. The Global Enterprise Edition of the Steel-Belted Radius software may be used by Customer only to manage access to Customer’s enterprise network.

Specifically, service provider customers are expressly prohibited from using the Global Enterprise Edition of the Steel-Belted Radius software to support any

commercial network access services.

The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase the applicable

license(s) for the Software from Juniper or an authorized Juniper reseller.

4. Use Prohibitions. Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees not to and shall

not: (a) modify, unbundle, reverse engineer, or create derivative works based on the Software; (b) make unauthorized copies of the Software (except as

necessary for backup purposes); (c) rent, sell, transfer, or grant any rights in and to any copy of the Software, in any form, to any third party; (d) remove

any proprietary notices, labels, or marks on or in any copy of the Software or any product in which the Software is embedded; (e) distribute any copy of

the Software to any third party, including as may be embedded in Juniper equipment sold in the secondhand market; (f) use any ‘locked’ or key-restricted

feature, function, service, application, operation, or capability without first purchasing the applicable license(s) and obtaining a valid key from Juniper, even

if such feature, function, service, application, operation, or capability is enabled without a key; (g) distribute any key for the Software provided by Juniper

to any third party; (h) use the Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized Juniper

reseller; (i) use the Embedded Software on non-Juniper equipment; (j) use the Software (or make it available for use) on Juniper equipment that the Customer

did not originally purchase from Juniper or an authorized Juniper reseller; (k) disclose the results of testing or benchmarking of the Software to any third

party without the prior written consent of Juniper; or (l) use the Software in any manner other than as expressly provided herein.

5. Audit. Customer shall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper, Customer shall furnish

such records to Juniper and certify its compliance with this Agreement.

6. Confidentiality. The Parties agree that aspects of the Software and associated documentation are the confidential property of Juniper. As such, Customer

shall exercise all reasonable commercial efforts to maintain the Software and associated documentation in confidence, which at a minimum includes

restricting access to the Software to Customer employees and contractors having a need to use the Software for Customer’s internal business purposes.

■ iii

7. Ownership. Juniper and Juniper's licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to the Software,

associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance of any right, title, or interest in

the Software or associated documentation, or a sale of the Software, associated documentation, or copies of the Software.

8. Warranty, Limitation of Liability, Disclaimer of Warranty. The warranty applicable to the Software shall be as set forth in the warranty statement that

accompanies the Software (the “Warranty Statement”). Nothing in this Agreement shall give rise to any obligation to support the Software. Support services

may be purchased separately. Any such support shall be governed by a separate, written support services agreement. TO THE MAXIMUM EXTENT PERMITTED

BY LAW, JUNIPER SHALL NOT BE LIABLE FOR ANY LOST PROFITS, LOSS OF DATA, OR COSTS OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES,

OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, THE SOFTWARE, OR ANY JUNIPER OR

JUNIPER-SUPPLIED SOFTWARE. IN NO EVENT SHALL JUNIPER BE LIABLE FOR DAMAGES ARISING FROM UNAUTHORIZED OR IMPROPER USE OF ANY

JUNIPER OR JUNIPER-SUPPLIED SOFTWARE. EXCEPT AS EXPRESSLY PROVIDED IN THE WARRANTY STATEMENT TO THE EXTENT PERMITTED BY LAW,

JUNIPER DISCLAIMS ANY AND ALL WARRANTIES IN AND TO THE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE), INCLUDING

ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOES JUNIPER

WARRANT THAT THE SOFTWARE, OR ANY EQUIPMENT OR NETWORK RUNNING THE SOFTWARE, WILL OPERATE WITHOUT ERROR OR INTERRUPTION,

OR WILL BE FREE OF VULNERABILITY TO INTRUSION OR ATTACK. In no event shall Juniper’s or its suppliers’ or licensors’ liability to Customer, whether

in contract, tort (including negligence), breach of warranty, or otherwise, exceed the price paid by Customer for the Software that gave rise to the claim, or

if the Software is embedded in another Juniper product, the price paid by Customer for such other product. Customer acknowledges and agrees that Juniper

has set its prices and entered into this Agreement in reliance upon the disclaimers of warranty and the limitations of liability set forth herein, that the same

reflect an allocation of risk between the Parties (including the risk that a contract remedy may fail of its essential purpose and cause consequential loss),

and that the same form an essential basis of the bargain between the Parties.

9. Termination. Any breach of this Agreement or failure by Customer to pay any applicable fees due shall result in automatic termination of the license

granted herein. Upon such termination, Customer shall destroy or return to Juniper all copies of the Software and related documentation in Customer’s

possession or control.

10. Taxes. All license fees for the Software are exclusive of taxes, withholdings, duties, or levies (collectively “Taxes”). Customer shall be responsible for

paying Taxes arising from the purchase of the license, or importation or use of the Software.

11. Export. Customer agrees to comply with all applicable export laws and restrictions and regulations of any United States and any applicable foreign

agency or authority, and not to export or re-export the Software or any direct product thereof in violation of any such restrictions, laws or regulations, or

without all necessary approvals. Customer shall be liable for any such violations. The version of the Software supplied to Customer may contain encryption

or other capabilities restricting Customer’s ability to export the Software without an export license.

12. Commercial Computer Software. The Software is “commercial computer software” and is provided with restricted rights. Use, duplication, or disclosure

by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS 227.7201 through 227.7202-4, FAR 12.212,

FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable.

13. Interface Information. To the extent required by applicable law, and at Customer's written request, Juniper shall provide Customer with the interface

information needed to achieve interoperability between the Software and another independently created program, on payment of applicable fee, if any.

Customer shall observe strict obligations of confidentiality with respect to such information and shall use such information in compliance with any applicable

terms and conditions upon which Juniper makes such information available.

14. Third Party Software. Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products or technology

are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement, and such licensor or vendor

shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party software may be provided with the

Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent portions of the Software are distributed under and

subject to open source licenses obligating Juniper to make the source code for such portions publicly available (such as the GNU General Public License

(“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper will make such source code portions (including Juniper modifications, as appropriate)

available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194

N. Mathilda Ave., Sunnyvale, CA 94089, ATTN: General Counsel. You may obtain a copy of the GPL at http://www.gnu.org/licenses/gpl.html, and a copy of

the LGPL at http://www.gnu.org/licenses/lgpl.html.

15. Miscellaneous. This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws principles. The provisions

of the U.N. Convention for the International Sale of Goods shall not apply to this Agreement. For any disputes arising under this Agreement, the Parties

hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal courts within Santa Clara County, California. This Agreement

constitutes the entire and sole agreement between Juniper and the Customer with respect to the Software, and supersedes all prior and contemporaneous

agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms of a

separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict

with terms contained herein. No modification to this Agreement nor any waiver of any rights hereunder shall be effective unless expressly assented to in

writing by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not affect the validity of the

remainder of this Agreement. This Agreement and associated documentation has been written in the English language, and the Parties agree that the English

version will govern. (For Canada: Les parties aux présentés confirment leur volonté que cette convention de même que tous les documents y compris tout

avis qui s'y rattaché, soient redigés en langue anglaise. (Translation: The parties confirm that this Agreement and all related documentation is and will be

in the English language)).

iv ■

Abbreviated Table of Contents

About This Guide xv

Part 1 J-series Overview

Chapter 1 Overview of Services Routers 3

Chapter 2 System Overview 13

Chapter 3 PIM and VoIP Module Overview 43

Chapter 4 Services Router User Interface Overview 81

Part 2 Installing a Services Router

Chapter 5 Preparing for Router Installation 103

Chapter 6 Installing and Connecting a Services Router 117

Chapter 7 Establishing Basic Connectivity 131

Chapter 8 Configuring Secure Web Access 153

Chapter 9 Installing and Managing J-series Licenses 161

Part 3 Maintaining Services Router Hardware

Chapter 10 Replacing Hardware Components 171

Chapter 11 Troubleshooting Hardware Components 209

Chapter 12 Contacting Customer Support and Returning Hardware 213

Part 4 J-series Requirements and Specifications

Chapter 13 Network Cable Specifications and Connector Pinouts 223

Chapter 14 Safety and Regulatory Compliance Information 247

Part 5 Index

Index 291

Abbreviated Table of Contents ■ v

vi ■

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Table of Contents

About This Guide xv

Objectives ......................................................................................................xv

Audience .......................................................................................................xv

How to Use This Guide .................................................................................xvi

Document Conventions ...............................................................................xvii

Related Juniper Networks Documentation ..................................................xviii

Documentation Feedback .............................................................................xxi

Requesting Technical Support ......................................................................xxi

Part 1 J-series Overview

Chapter 1 Overview of Services Routers 3

J2320 Services Router Overview .....................................................................3

J2350 Services Router Overview .....................................................................4

J4350 Services Router Overview .....................................................................5

J6350 Services Router Overview .....................................................................6

J-series Software Features and Licenses ...........................................................7

Chapter 2 System Overview 13

J2320 and J2350 Services Router Hardware Features ....................................13

J2320 and J2350 Chassis .........................................................................13

J2320 and J2350 Midplane ......................................................................18

J2320 and J2350 Routing Engine Hardware ............................................18

J2320 and J2350 Boot Devices ................................................................19

J2320 and J2350 Front Panel ..................................................................19

Physical Interface Modules (PIMs) ....................................................20

Power Button and POWER LED ........................................................20

STATUS LED .....................................................................................21

ALARM LED ......................................................................................21

HA LED ............................................................................................22

RESET CONFIG Button .....................................................................22

Built-In Gigabit Ethernet Ports ..........................................................23

Console Port .....................................................................................23

AUX Port ..........................................................................................23

USB Port ...........................................................................................24

J2320 and J2350 External Compact Flashes ............................................24

Table of Contents ■ vii

J2320 Power System ...............................................................................24

J2350 Power System ...............................................................................24

J2320 and J2350 Cooling System ............................................................25

J4350 and J6350 Services Router Hardware Features ....................................26

J4350 and J6350 Chassis .........................................................................27

J4350 and J6350 Midplane ......................................................................31

J4350 and J6350 Routing Engine Hardware ............................................31

J4350 and J6350 Boot Devices ................................................................31

J4350 and J6350 Front Panel ..................................................................32

Physical Interface Modules (PIMs) ....................................................32

Power Button and POWER LED ........................................................33

STATUS LED .....................................................................................33

ALARM LED ......................................................................................34

HA LED ............................................................................................34

RESET CONFIG Button .....................................................................35

Built-In Gigabit Ethernet Ports ..........................................................35

Console Port .....................................................................................36

AUX Port ..........................................................................................36

USB Port ...........................................................................................36

J4350 Power System ...............................................................................36

J6350 Power System ...............................................................................37

J4350 and J6350 Cooling System ............................................................38

Software Overview ........................................................................................39

Routing Engine and Packet Forwarding Engine .......................................40

Kernel and Microkernel ..........................................................................40

JUNOS Software Processes ......................................................................40

User Interfaces ........................................................................................41

Chapter 3 PIM and VoIP Module Overview 43

PIM and VoIP Module Terms .........................................................................43

Field-Replaceable PIMs ..................................................................................46

J2320 and J2350 Field-Replaceable PIM Summary ..................................46

J4350 and J6350 Field-Replaceable PIM Summary ..................................47

1-Port, 6-Port, 8-Port, and 16-Port Gigabit Ethernet uPIMs ......................49

1-Port Gigabit Ethernet ePIMs .................................................................52

Dual-Port Serial PIM ................................................................................55

Dual-Port T1 or E1 PIM ...........................................................................56

Dual-Port Channelized T1/E1/ISDN PRI PIM ............................................57

T3 or E3 PIM ...........................................................................................59

Dual-Port Fast Ethernet PIM ....................................................................60

4-Port Fast Ethernet ePIM .......................................................................61

4-Port ISDN BRI PIMs ..............................................................................62

ADSL PIM ................................................................................................64

G.SHDSL PIM ..........................................................................................65

Avaya VoIP Modules ......................................................................................66

Avaya VoIP Module Summary .................................................................67

TGM550 Telephony Gateway Module ......................................................69

TIM508 Analog Telephony Interface Module ...........................................73

TIM510 E1/T1 Telephony Interface Module ............................................74

viii ■ Table of Contents

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

TIM514 Analog Telephony Interface Module ...........................................75

TIM516 Analog Telephony Interface Module ...........................................76

TIM518 Analog Telephony Interface Module ...........................................78

TIM521 BRI Telephony Interface Module ................................................79

Chapter 4 Services Router User Interface Overview 81

User Interface Overview ................................................................................81

J-Web Overview ......................................................................................81

CLI Overview ..........................................................................................82

Before You Begin ...........................................................................................82

Using the J-Web Interface ..............................................................................83

Starting the J-Web Interface ....................................................................83

J-Web Layout ..........................................................................................83

Elements of the J-Web Interface ..............................................................84

Top Pane Elements ..........................................................................85

Main Pane Elements .........................................................................85

Side Pane Elements ..........................................................................86

Navigating the J-Web Interface ................................................................87

Navigating the Quick Configuration Pages ........................................88

Navigating the J-Web Configuration Editor .......................................88

Getting J-Web Help ...........................................................................89

J-Web Sessions ........................................................................................90

Using the Command-Line Interface ...............................................................91

CLI Command Hierarchy ........................................................................91

Starting the CLI .......................................................................................92

CLI Operational Mode .............................................................................92

CLI Configuration Mode ..........................................................................93

CLI Basics ...............................................................................................94

Editing Keystrokes ............................................................................94

Command Completion .....................................................................95

Online Help ......................................................................................96

Configuring the CLI Environment .....................................................97

Part 2 Installing a Services Router

Chapter 5 Preparing for Router Installation 103

General Site Guidelines ................................................................................103

Rack Requirements .....................................................................................104

Rack Size and Strength for J2320 and J2350 Routers ............................104

Rack Size and Strength for J4350 and J6350 Routers ............................105

Connection to Building Structure ..........................................................105

Router Environmental Tolerances ...............................................................106

Fire Safety Requirements ............................................................................106

Fire Suppression ...................................................................................106

Fire Suppression Equipment .................................................................107

Table of Contents ■ ix

Table of Contents

Power Guidelines, Requirements, and Specifications ...................................107

Site Electrical Wiring Guidelines ............................................................108

Signaling Limitations ......................................................................108

Radio Frequency Interference ........................................................108

Electromagnetic Compatibility .......................................................108

Router Power Requirements .................................................................109

AC Power, Connection, and Power Cord Specifications ........................109

DC Power, Connection, and Power Cable Specifications .......................111

Planning for Power Management ..........................................................112

Network Cable Specifications ......................................................................115

ISDN Provisioning .......................................................................................115

Site Preparation Checklist ............................................................................115

Chapter 6 Installing and Connecting a Services Router 117

Before You Begin .........................................................................................117

Unpacking a J-series Services Router ...........................................................118

Installing J2320 and J2350 Routers .............................................................119

Installing J4350 and J6350 Routers .............................................................120

Connecting Interface Cables to Services Routers .........................................123

Chassis Grounding .......................................................................................123

Connecting Power .......................................................................................124

Connecting AC Power ...........................................................................124

Connecting DC Power ...........................................................................126

Powering a Services Router On and Off ......................................................129

Chapter 7 Establishing Basic Connectivity 131

Basic Connectivity Terms ............................................................................131

Basic Connectivity Overview .......................................................................132

Router Identification .............................................................................132

Root Password ......................................................................................133

Time Zone and System Time ................................................................133

Network Settings ...................................................................................133

Default Gateway ...................................................................................134

Backup Router ......................................................................................134

Loopback Address .................................................................................134

Built-In Ethernet Interface Address .......................................................134

Management Access .............................................................................135

Before You Begin .........................................................................................136

Connecting to a Services Router ..................................................................137

Connecting to the J-Web Interface ........................................................137

Connecting to the CLI Locally ................................................................139

Connecting to the CLI Remotely ...........................................................141

Configuring the Modem at the Router End .....................................141

Connecting the Modem to the Console Port ...................................142

Connecting to the CLI at the User End ............................................143

Configuring Basic Settings with J-Web Quick Configuration .........................143

x ■ Table of Contents

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Configuring Basic Settings with a Configuration Editor ................................147

Verifying Basic Connectivity ........................................................................150

Displaying Basic Connectivity Configurations .......................................150

Chapter 8 Configuring Secure Web Access 153

Secure Web Access Terms ...........................................................................153

Secure Web Access Overview ......................................................................154

Before You Begin .........................................................................................154

Generating SSL Certificates ...................................................................155

Configuring Secure Web Access ..................................................................155

Configuring Secure Web Access with a Configuration Editor .......................158

Verifying Secure Web Access ......................................................................159

Displaying an SSL Certificate Configuration ..........................................159

Displaying a Secure Access Configuration .............................................160

Chapter 9 Installing and Managing J-series Licenses 161

J-series License Overview ............................................................................161

License Enforcement ............................................................................161

Software Feature Licenses ....................................................................162

License Key Components ......................................................................162

Before You Begin .........................................................................................162

Managing J-series Licenses with the J-Web Interface ...................................163

Adding New Licenses with the J-Web Interface .....................................164

Deleting Licenses with the J-Web Interface ...........................................164

Displaying License Keys with the J-Web Interface .................................164

Downloading Licenses with the J-Web Interface ....................................164

Managing J-series Licenses with the CLI ......................................................165

Adding New Licenses with the CLI ........................................................165

Deleting a License with the CLI .............................................................165

Saving License Keys with the CLI ..........................................................166

Verifying J-series License Management ........................................................166

Displaying Installed Licenses ................................................................166

Displaying License Usage ......................................................................167

Displaying Installed License Keys .........................................................167

Part 3 Maintaining Services Router Hardware

Chapter 10 Replacing Hardware Components 171

Tools and Parts Required ............................................................................171

Replacing the Console Port Cable ................................................................172

Replacing a PIM ..........................................................................................172

Removing a PIM ...................................................................................172

Installing a PIM .....................................................................................174

Table of Contents ■ xi

Table of Contents

Replacing PIM Cables ..................................................................................175

Removing PIM Cables ...........................................................................175

Installing PIM Cables .............................................................................175

Removing and Replacing the Chassis Cover on J2320 and J2350 Routers ....176

Replacing Internal Compact Flashes on J2320 and J2350 Routers ...............178

Replacing Internal Compact Flashes on J4350 and J6350 Routers ...............181

Replacing External Compact Flashes ...........................................................184

Replacing USB Storage Devices ...................................................................186

Removing the USB Storage Device ........................................................186

Installing the USB Storage Device .........................................................187

Replacing DRAM Modules ...........................................................................188

Removing a DRAM Module ...................................................................189

Installing a DRAM Module .....................................................................190

Replacing Power System Components ........................................................191

Replacing AC Power Supply Cords ........................................................191

Removing an AC Power Supply from J6350 Routers .............................192

Installing an AC Power Supply in J6350 Routers ...................................193

Replacing DC Power Supply Cables .......................................................194

Removing a DC Power Supply ..............................................................195

Installing a DC Power Supply ................................................................196

Replacing Crypto Accelerator Modules on J2320 and J2350 Routers ...........198

Removing a J2320 or J2350 Crypto Accelerator Module ........................199

Installing a J2320 or J2350 Crypto Accelerator Module .........................200

Replacing Crypto Accelerator Modules on J4350 and J6350 Routers ...........201

Removing a J4350 or J6350 Crypto Accelerator Module ........................202

Installing a J4350 or j6350 Crypto Accelerator Module .........................204

Replacing Air Filters on J2350 Routers ........................................................205

Replacing Air Filters on J4350 and J6350 Routers .......................................206

Chapter 11 Troubleshooting Hardware Components 209

Chassis Alarm Conditions ............................................................................209

Troubleshooting Power Management ..........................................................210

Contacting the Juniper Networks Technical Assistance Center .....................212

Chapter 12 Contacting Customer Support and Returning Hardware 213

Locating Component Serial Numbers ..........................................................213

J2320 and J2350 Chassis Serial Number and Agency Labels .................214

J4350 and J6350 Chassis Serial Number and Agency Labels .................215

PIM Serial Number Label ......................................................................216

Power Supply Serial Number Labels ......................................................216

Contacting Customer Support ......................................................................216

Information You Might Need to Supply to JTAC ....................................216

Return Procedure ........................................................................................216

Packing a Router or Component for Shipment ............................................217

Tools and Parts Required ......................................................................217

Packing the Services Router for Shipment ............................................218

Packing Components for Shipment .......................................................218

xii ■ Table of Contents

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Part 4 J-series Requirements and Specifications

Chapter 13 Network Cable Specifications and Connector Pinouts 223

Serial PIM Cable Specifications ....................................................................223

RS-232 DTE Cable Pinout ......................................................................224

RS-232 DCE Cable Pinout .....................................................................225

RS-422/449 (EIA-449) DTE Cable Pinout ...............................................225

RS-422/449 (EIA-449) DCE Cable Pinout ...............................................227

EIA-530A DTE Cable Pinout ..................................................................228

EIA-530A DCE Cable Pinout ..................................................................229

V.35 DTE Cable Pinout ..........................................................................230

V.35 DCE Cable Pinout .........................................................................231

X.21 DTE Cable Pinout .........................................................................231

X.21 DCE Cable Pinout .........................................................................232

Fast Ethernet RJ-45 Connector Pinout .........................................................233

Gigabit Ethernet uPIM RJ-45 Connector Pinout ............................................233

Gigabit Ethernet ePIM RJ-45 Connector Pinout ............................................234

Chassis Console Port Pinouts .......................................................................234

E1 and T1 RJ-48 Cable Pinouts ....................................................................235

E3 and T3 BNC Connector Pinout ................................................................238

ADSL and G.SHDSL RJ-11 Connector Pinout ................................................238

ISDN RJ-45 Connector Pinout ......................................................................239

Connector Pinouts for Avaya VoIP Modules .................................................239

TGM550 Console Port Pinouts ..............................................................239

TGM550 RJ-11 Connector Pinout for Analog Ports ................................240

TIM508 Connector Pinout .....................................................................241

TIM510 RJ-45 Connector Pinout ............................................................241

TIM514 Connector Pinout .....................................................................242

TIM516 Connector Pinout .....................................................................242

TIM518 Connector Pinout .....................................................................244

TIM521 Connector Pinout .....................................................................245

Chapter 14 Safety and Regulatory Compliance Information 247

Definition of Safety Warning Levels ............................................................247

Safety Guidelines and Warnings ..................................................................249

General Safety Guidelines and Warnings ...............................................249

Qualified Personnel Warning ..........................................................250

Preventing Electrostatic Discharge Damage ...................................251

Electrical Safety Guidelines and Warnings ............................................252

General Electrical Safety Guidelines ................................................252

AC Power Electrical Safety Guidelines ............................................253

DC Power Electrical Safety Guidelines ............................................254

Power Sources for Redundant Power Supplies ...............................255

DC Power Disconnection Warning .................................................255

DC Power Grounding Requirements and Warning ..........................257

DC Power Wiring Sequence Warning .............................................257

DC Power Wiring Terminations Warning .......................................259

Table of Contents ■ xiii

Table of Contents

Grounded Equipment Warning .......................................................260

Warning Statement for Norway and Sweden ..................................261

In Case of Electrical Accident .........................................................261

Multiple Power Supplies Disconnection Warning ............................262

Power Disconnection Warning .......................................................263

TN Power Warning .........................................................................264

Telecommunication Line Cord Warning .........................................265

Installation Safety Guidelines and Warnings .........................................266

Chassis Lifting Guidelines ...............................................................266

Installation Instructions Warning ....................................................266

Rack-Mounting Requirements and Warnings ..................................267

Ramp Warning ...............................................................................271

Laser and LED Safety Guidelines and Warnings ....................................271

General Laser Safety Guidelines ......................................................272

Class 1 Laser Product Warning .......................................................272

Class 1 LED Product Warning .........................................................273

Laser Beam Warning ......................................................................273

Radiation from Open Port Apertures Warning ................................274

Maintenance and Operational Safety Guidelines and Warnings ............275

Battery Handling Warning ..............................................................276

Jewelry Removal Warning ..............................................................277

Lightning Activity Warning .............................................................278

Operating Temperature Warning ....................................................279

Product Disposal Warning ..............................................................281

Agency Approvals ........................................................................................282

Compliance Statements for Environmental Requirements ..........................283

Lithium Battery .....................................................................................283

Compliance Statements for NEBS ................................................................283

Compliance Statements for EMC Requirements ..........................................283

Canada .................................................................................................284

European Community ...........................................................................285

Japan ....................................................................................................286

United States ........................................................................................287

FCC Part 15 Statement ...................................................................287

FCC Part 68 Statement ...................................................................287

Part 5 Index

Index ...........................................................................................................291

xiv ■ Table of Contents

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

About This Guide

This preface provides the following guidelines for using the J2320, J2350, J4350, and

J6350 Services Router Getting Started Guide:

■ Objectives on page xv

■ Audience on page xv

■ How to Use This Guide on page xvi

■ Document Conventions on page xvii

■ Related Juniper Networks Documentation on page xviii

■ Documentation Feedback on page xxi

■ Requesting Technical Support on page xxi

Objectives

This guide contains an overview, basic instructions, and specifications for J2320,

J2350, J4350, and J6350 Services Routers. It explains how to prepare your site for

installation, unpack and install a Services Router and its components, power on the

router, install licenses, and establish basic connectivity.

J-series Services Router operations are controlled by the JUNOS software. You direct

the JUNOS software through either a Web browser or a command-line interface (CLI).

NOTE: This guide documents Release 9.2 of the JUNOS software. For additional

information about J-series Services Routers—either corrections to or omissions from

this guide—see the J-series Services Router Release Notes at http://www.juniper.net.

Audience

This guide is designed for anyone who installs and sets up a J-series Services Router

or prepares a site for Services Router installation. The guide is intended for the

following audiences:

■ Customers with technical knowledge of and experience with networks and the

Internet

■ Network administrators who install, configure, and manage Internet routers but

are unfamiliar with the JUNOS software

Objectives ■ xv

■ Network administrators who install, configure, and manage products of Juniper

Networks

Personnel operating the equipment must be trained and competent; must not conduct

themselves in a careless, willfully negligent, or hostile manner; and must abide by

the instructions provided by the documentation.

How to Use This Guide

J-series documentation explains how to install, configure, and manage J-series routers

by providing information about JUNOS implementation specifically on J-series routers.

(For comprehensive JUNOS information, see the JUNOS software manuals listed in

“Related Juniper Networks Documentation” on page xviii.) Table 1 on page xvi shows

the location of J-series information, by task type, in Juniper Networks documentation.

Table 1: Location of J-series Information

Location of InstructionJ-series Tasks

Getting Started Guide for your routerInstalling hardware and establishing basic connectivity

J-series Services Router Basic LAN and WAN Access

Configuration Guide

Configuring interfaces and routing protocols such as RIP, OSPF, BGP,

and IS-IS

J-series Services Router Advanced WAN Access

Configuration Guide

Configuring advanced features such as virtual private networks (VPNs),

IP Security (IPsec), multicast, routing policies, firewall filters, and class

of service (CoS)

J-series Services Router Administration GuideManaging users and operations, monitoring performance, upgrading

software, and diagnosing common problems

J-Web Interface User GuideUsing the J-Web interface

JUNOS CLI User GuideUsing the CLI

Typically, J-series documentation provides both general and specific information—for

example, a configuration overview, configuration examples, and verification methods.

Because you can configure and manage J-series routers in several ways, you can

choose from multiple sets of instructions to perform a task. To make best use of this

information:

■ If you are new to the topic—Read through the initial overview information, keep

the related JUNOS guide handy for details about the JUNOS hierarchy, and follow

the step-by-step instructions for your preferred interface.

■ If you are already familiar with the feature—Go directly to the instructions for the

interface of your choice, and follow the instructions. You can choose a J-Web

method, the JUNOS CLI, or a combination of methods based on the level of

complexity or your familiarity with the interface.

For many J-series features, you can use J-Web Quick Configuration pages to configure

the router quickly and easily without configuring each statement individually. For

xvi ■ How to Use This Guide

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

more extensive configuration, use the J-Web configuration editor or CLI configuration

mode commands.

To monitor, diagnose, and manage a router, use the J-Web interface or CLI operational

mode commands.

Document Conventions

Table 2 on page xvii defines the notice icons used in this guide.

Table 2: Notice Icons

DescriptionMeaningIcon

Indicates important features or instructions.Informational note

Indicates a situation that might result in loss of data or hardware damage.Caution

Alerts you to the risk of personal injury or death.Warning

Alerts you to the risk of personal injury from a laser.Laser warning

Table 3 on page xvii defines the text and syntax conventions used in this guide.

Table 3: Text and Syntax Conventions

ExamplesDescriptionConvention

To enter configuration mode, type the

configure command:

user@host> configure

Represents text that you type.

Bold text like this

user@host> show chassis alarms

No alarms currently active

Represents output that appears on the

terminal screen.

Fixed-width text like this

■

A policy term is a named structure

that defines match conditions and

actions.

■

JUNOS System Basics Configuration

Guide

■

RFC 1997, BGP Communities

Attribute

■

Introduces important new terms.

■

Identifies book names.

■

Identifies RFC and Internet draft

titles.

Italic text like this

Document Conventions ■ xvii

About This Guide

Table 3: Text and Syntax Conventions (continued)

ExamplesDescriptionConvention

Configure the machine’s domain name:

[edit]

root@# set system domain-name

domain-name

Represents variables (options for which

you substitute a value) in commands or

configuration statements.

Italic text like this

■

To configure a stub area, include

the stub statement at the [edit

protocols ospf area area-id]

hierarchy level.

■

The console port is labeled

CONSOLE.

Represents names of configuration

statements, commands, files, and

directories; IP addresses; configuration

hierarchy levels; or labels on routing

platform components.

Plain text like this

stub <default-metric metric>;

Enclose optional keywords or variables.< > (angle brackets)

broadcast | multicast

(string1 | string2 | string3)

Indicates a choice between the mutually

exclusive keywords or variables on either

side of the symbol. The set of choices is

often enclosed in parentheses for clarity.

| (pipe symbol)

rsvp { # Required for dynamic MPLS only

Indicates a comment specified on the

same line as the configuration statement

to which it applies.

# (pound sign)

community name members [

community-ids ]

Enclose a variable for which you can

substitute one or more values.

[ ] (square brackets)

[edit]

routing-options {

static {

route default {

nexthop address;

retain;

}

Identify a level in the configuration

hierarchy.

Indention and braces ( { } )

Identifies a leaf statement at a

configuration hierarchy level.

; (semicolon)

J-Web GUI Conventions

■

In the Logical Interfaces box, select

All Interfaces.

■

To cancel the configuration, click

Cancel.

Represents J-Web graphical user

interface (GUI) items you click or select.

Bold text like this

In the configuration editor hierarchy,

select Protocols>Ospf.

Separates levels in a hierarchy of J-Web

selections.

> (bold right angle bracket)

Juniper Networks J2350 User manual

This manual is also suitable for

Juniper Networks J2350 User manual

Related papers

Other documents