Lenovo ServeRAID M5100 Series Quick Installation Manual

Lenovo
Brand
Lenovo
Model
ServeRAID M5100 Series
Type
Quick Installation Manual
ServeRAID M5100 Series Battery Kit
Quick Installation Guide
Second Edition (March 2016)
© Copyright Lenovo 2014, 2015, 2016.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract
No. GS-35F-05925.
Lenovo P/N: 81Y1389
Revision History
Version and Date Description of Changes
March 2016 Rebranded document.
October 2011 Initial release of the document.
| March 2016 Page 3
ServeRAID M5100 Series Battery Kit Quick Installation Guide Safety
Safety
Page 4 | March 2016
ServeRAID M5100 Series Battery Kit Quick Installation Guide Safety
| March 2016 Page 5
ServeRAID M5100 Series Battery Kit Quick Installation Guide Safety
Safety statements
Page 6 | March 2016
ServeRAID M5100 Series Battery Kit Quick Installation Guide Safety
| March 2016 Page 7
ServeRAID M5100 Series Battery Kit Quick Installation Guide Safety
Page 8 | March 2016
ServeRAID M5100 Series Battery Kit Quick Installation Guide Safety
Statement 28:
CAUTION:
The battery is a lithium ion battery. To avoid possible explosion, do not burn the
battery. Exchange it only with the approved part. Recycle or discard the battery
as instructed by local regulations.
| March 2016 Page 9
ServeRAID M5100 Series Battery Kit Quick Installation Guide Product Overview
Quick Installation Guide
Thank you for purchasing the ServeRAID M5100 Series Battery Kit. Before you install
and connect the ServeRAID M5100 Series Battery Kit, please take a few minutes to read
this quick installation guide. This guide explains how to connect the ServeRAID M5100
Series Battery Kit remotely to your ServeRAID M5100 Series Controller. If you need more
information about any topic covered in this guide, refer to the related documents on
your ServeRAID-M Documentation CD.
Product Overview The ServeRAID M5100 Series Battery Kit provides an inexpensive alternative to using an
uninterruptible power supply (UPS) and a second level of fault tolerance when used
with a UPS.
The ServeRAID M5100 Series Battery Kit product is an intelligent battery backup unit
(iBBU) based on Lithium ion (LiON) battery cell technology. The unit protects the
integrity of the cached data on a ServeRAID M5100 Series Controller for up to 48 hours
(depending on the derated retention time selected) in case of a complete AC power
failure or a brief power outage.
Connect the remote ServeRAID M5100 Series Battery Kit unit by cable to the ServeRAID
M5100 Series 512MB Cache/RAID 5 Upgrade, which is a transportable memory module
installed on the following ServeRAID controllers:
ServeRAID M5110 SAS/SATA Controller
ServeRAID M5120 SAS/SATA Controller
For the procedures, see Connecting a Remote ServeRAID M5100 Series Battery Kit Unit on
the System Chassis to a ServeRAID-M5100 Series 512MB Cache/RAID 5 Upgrade on a
ServeRAID Controller.
CAUTION: The battery used in this device might present a fire or chemical burn hazard
if mistreated. Do not disassemble, heat above 100 °C (212 °F) or incinerate. Dispose of
used battery properly. Keep away from children.
Top View and Bottom View of the
ServeRAID M5100 Series Battery
Kit
The following figure shows the top view and the bottom view of the ServeRAID M5100
Series Battery Kit. The top view is the side that you can see after you install the
ServeRAID M5100 Series Battery Kit on the system chassis.
ServeRAID M5100 Series Battery Kit
Page 10 | March 2016
ServeRAID M5100 Series Battery Kit Quick Installation GuideConnecting a Remote ServeRAID M5100 Series Battery Kit Unit on the System Chassis to a
ServeRAID-M5100 Series 512MB Cache/RAID 5 Upgrade on a ServeRAID Controller
Figure 1: Top View and Bottom View of the ServeRAID M5100 Series Battery Kit
1. Board-to-Board Connector
2. Remote Cable Connector
NOTE: Record your controller serial number in a safe location in case you need to
contact Lenovo.
Connecting a Remote ServeRAID
M5100 Series Battery Kit Unit on
the System Chassis to a
ServeRAID-M5100 Series 512MB
Cache/RAID 5 Upgrade on a
ServeRAID Controller
The procedures in this section show how to connect a remote ServeRAID M5100 Series
Battery Kit on the system chassis to ServeRAID M5120 SAS/SATA Controller. You can
connect the ServeRAID M5100 Series Battery Kit in the same way to the ServeRAID
M5110 SAS/SATA Controller.
To connect a remote ServeRAID M5100 Series Battery Kit unit to your ServeRAID
controller, perform the following tasks in order:
1. See Removing the ServeRAID Controller from the Computer on page 11
2. See Connecting the Cable Between the ServeRAID M5100 Series 512MB Cache/RAID 5
on the ServeRAID Controller and the Remote ServeRAID M5100 Series Battery Unit on
page 11
3. See Reinstalling the ServeRAID Controller in the Computer on page 12
NOTE: Because server chassis vary from vendor to vendor, no standard mounting
option exists that is compatible with the various system configurations. The
ServeRAID M5100 Series Battery Kit, in combination with the Remote Battery Kit,
includes the battery, daughtercard, cable, and screws. This combination enables
authorized resellers and chassis manufacturers to customize the location of the
remote battery to provide the most flexibility within various environments.
LSI CORP. © 2010 ALL RIGHTS RESERVED
Pb e1
ASSEMBLED
IN CHINA
RoHS
AsRPCB
E248037
94V0
Li Ion
Model: BAT1S1P-A
BBU P/N: L4-25407-00
BBU S/N: SAYWWSSSSSss
Contains:
Sony US454261A8T Cell
Rechargeable Li-Polymer
Battery Pack
Rating:
3.7V; 1.59 Ah; 5.9Wh
Finished in China
WARNING: The battery used in this
device may present a risk of fire or
chemical burn if mistreated. DO NOT
disassemble, heat above 60C, crush or
puncture, short circuit external contacts,
or dispose of in fire or water.
MH29577
Li-ion
!
L3-25407-00A
Top View
Bottom View
85083-00
1
2
| March 2016 Page 11
ServeRAID M5100 Series Battery Kit Quick Installation Guide Connecting a Remote ServeRAID M5100 Series Battery Kit Unit on the System Chassis to a
ServeRAID-M5100 Series 512MB Cache/RAID 5 Upgrade on a ServeRAID Controller
Removing the ServeRAID
Controller from the Computer
Follow these steps to remove the ServeRAID controller from the computer.
1. Turn off the power, and unplug the power cords.
2. Ground yourself, and make sure that the system is grounded.
3. Remove the cover from the computer, according to the instructions in the system
user’s manual, to allow access to the controller.
4. Unplug all cables from the controller, remove the screw that attaches the bracket to
the computer chassis, and carefully remove the controller from the slot.
5. Place the controller on a flat, clean, static-free surface, and continue with the next
procedure.
Connecting the Cable Between the
ServeRAID M5100 Series 512MB
Cache/RAID 5 on the ServeRAID
Controller and the Remote
ServeRAID M5100 Series Battery
Unit
Follow these steps to connect the cable between the ServeRAID M5100 Series 512MB
Cache/RAID 5 Upgrade on the ServeRAID controller and the ServeRAID M5100 Series
Battery Kit.
1. Mount the ServeRAID M5100 Series Battery Kit unit to the chassis of your computer
based on the location and the type of mounting option.
2. With the controller on a flat, clean, static-free surface, ground yourself, and make
sure that the system is grounded.
3. Remove the cable included in the ServeRAID M5100 Series Battery Kit.
4. Insert one end of the cable into the 20-pin cable connector on the ServeRAID
M5100 Series Battery Kit unit and the other end into the 20-pin J1L1 cable
connector on the ServeRAID M5100 Series 512MB Cache/RAID 5 Upgrade, as shown
in the following figure.
NOTE: The cable connectors are polarized and can be inserted into the cable
connectors on the ServeRAID M5100 Series 512MB Cache/RAID 5 Upgrade and the
ServeRAID M5100 Series Battery Kit only if the rails on the cable connectors align with
the slots on the other connectors. Do not force the cable into the 20-pin connectors. The
cable end inserts into the connector with minimal resistance.
Page 12 | March 2016
ServeRAID M5100 Series Battery Kit Quick Installation GuideTechnical Support
Figure 2: Connecting the ServeRAID M5100 Series Battery Kit Unit on the System Chassis
to the ServeRAID M5100 Series 512MB Cache/RAID 5 Upgrade on the ServeRAID
Controller
Reinstalling the ServeRAID
Controller in the Computer
Follow these steps to reinstall the ServeRAID controller in the computer.
1. With the power to the chassis still turned off and the power cords unplugged, make
sure that the chassis is grounded and has no AC power.
2. Insert the ServeRAID controller in a PCI Express slot on the motherboard.
NOTE: Some PCI Express slots support only PCI Express graphics cards. A ServeRAID
controller installed in one of these slots will not function. Refer to your computer
documentation for information about the PCI Express slot.
3. Press down gently, but firmly, to seat the controller correctly in the slot.
4. Secure the controller to the computer chassis with the bracket screw.
5. Reinstall the computer cover, and reattach the power cords.
6. Turn on the power to the computer.
Refer to the ServeRAID-M Software User’s Guide for information about running the RAID
configuration utility and installing the software drivers.
Technical Support Refer to the Important Notices document for information about the technical support
available for this product.
85083-01
LSI CORP.© 2 010 ALL RIGHTS RESERVED
Pb e1
ASSEMBLED
IN CHINA
RoHS
AsRPCB
E248037
94V0
Li Ion
Model: BAT1S1P-A
BBU P/N: L4-25407-00
BBU S/N: SAYWWSSSSSss
Contains:
Sony US454261A8T Cell
Rechargeable Li-Polymer
Battery Pack
Rating:
3.7V; 1.59 Ah; 5.9Wh
Finished in China
WARNING: The battery used in thi s
device may present a risk of fire or
chemical burn if mistreated. DO NOT
disassemble, heat above 60C, crush or
puncture, short circuit external contacts,
or dispose of in fire or water.
MH29577
Li-ion
!
L
3
-
25
4
0
7
-0
0
A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Lenovo ServeRAID M5100 Series Quick Installation Manual

Lenovo
Brand
Lenovo
Model
ServeRAID M5100 Series
Type
Quick Installation Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents