Supermicro SSE-X3648SR Installation guide

Brand: Supermicro

Model: SSE-X3648SR

Type: Installation guide

This manual is also suitable for

SSE-X3648S

SSE-X3648S Switch

SSE-X3648SR Switch

Installation Manual

Revison 1.0

SSE-X3648S/SSE-X3648SR Switch Installation Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials

: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS

PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO

THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND

OTHER REPRODUCTIVE HARM.

SSE-X3648S/SSE-X3648SR Installation Manual

Release Date: June 24, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel, technicians and network administrators who are

responsible for installing and setting up network equipment; consequently, it assumes a

basic working knowledge of LANs (Local Area Networks). It provides information for the

installation and use of the Supermicro's SSE-X3648S and SSE-X3648SR switches.

Installation and maintenance should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides an introduction to the switch.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when using the switch.

Chapter 3: Installation Requirements

This chapter covers installation requirements, notices and security warnings for the

switches.

Chapter 4: Device Installation

Use this chapter for installation of the switches and connecting them to your systems.

SSE-X3648S Switch User’s Guide

Notes

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Features and Benefits......................................................................1-1

1-2 Description of Hardware...................................................................1-1

Front Panel .............................................................................................1-1

Back Panel..............................................................................................1-2

1-3 Status LEDs .......................................................................................1-2

1-4 Port Description.................................................................................1-4

1-5 Power Supply Module.......................................................................1-5

460W Power Module...............................................................................1-5

1-6 Fan Module........................................................................................1-6

1-7 System Specifications.......................................................................1-7

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements......................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker........................................................................................2-4

Power Disconnection Warning................................................................2-5

Equipment Installation.............................................................................2-6

Restricted Area.......................................................................................2-7

Battery Handling .....................................................................................2-9

Comply with Local and National Electrical Codes.................................2-10

Product Disposal...................................................................................2-11

Power Cable and AC Adapter ..............................................................2-12

Chapter 3 Installation Requirements........................................3-1

3-1 Environmental Requirements .........................................................3-1

3-2 Dust and Particles.............................................................................3-1

3-3 Temperature and Humidity...............................................................3-2

3-4 Power Supply.....................................................................................3-3

3-5 Preventing Electrostatic Discharge Damage................................3-3

3-6 Anti-interference................................................................................3-3

3-7 Rack Configuration ...........................................................................3-4

3-8 Installation Notice..............................................................................3-4

3-9 Security Warnings.............................................................................3-5

SSE-X3648S/SSE-X3648SR Switch Installation Manual

Chapter 4 Device Installation ........................................................4-1

4-1 Installation Preparation.....................................................................4-1

Verify the Package Contents...................................................................4-1

Required Tools and Utilities ....................................................................4-1

4-2 Device Installation.............................................................................4-2

Installing the Switch in a Shelf Rack.......................................................4-2

Installing the Switch into a Rail Rack......................................................4-3

Installing the Power Supply Module........................................................4-4

Installing the Fan.....................................................................................4-5

Connecting the Console..........................................................................4-6

SFP/SFP+/QSFP+ Transceiver Installation............................................4-6

Copper Cable/Fiber Cable Connection...................................................4-7

AC Power Supply Connection.................................................................4-9

Grounding Cable Connection................................................................4-10

Checking the Switch .............................................................................4-10

1-1

Chapter 1: Introduction

Chapter 1

Introduction

The SSE-X3648S and SSE-X3648SR switches are the latest generation of 10Gb

Ethernet routing switches from Supermicro. They are based on 10Gb switching

technology and are designed for aggregating connectivity to 40Gb servers in data

centers – or for 40Gb access to backbone networks. Preloaded with Open Networking

Installation Environment (ONIE), they are particularly suitable for use in an Open

Networking environment.

The SSE-X3648S and SSE-X3648SR switches with advanced intelligent and secure

features, can serve ideally as a distribution layer switch for campus networks, enterprise

networks and HP networks; as well as a core layer switch for small to medium-sized

networks.

1-1 Features and Benefits

• Various Interfaces – The SSE-X3648S/SSE-X3648SR switches provide 48 10Gb

SFP+ and 6 40Gb QSFP+ ports. Each QSFP+ port can be split into 4 10Gb SFP+

ports.

• Support 10Gb Ethernet – 10Gb Ethernet adopts full-duplex technology instead of

the half-duplex CSMA/CD protocol. 10Gb Ethernet can be deployed in star or ring

topologies. With 10Gb Ethernet, the SSE-X3648S/SSE-X3648SR switches provide

broad bandwidth and powerful processing capacity. Using the SSE-X3648S/

SSE-X3648SR switches, users can simplify network structures and reduce the

overall cost of building a network.

1-2 Description of Hardware

Front Panel

The front panel descriptions of the SSE-X3648S/SSE-X3648SR switches are shown in

the following table.

The front panel of the SSE-X3648S/SSE-X3648SR switches is shown below:

Table 1-1. Front Panel Descriptions of the SSE-X3648S/SSE-X3648SR Switch

Type SFP+ Port QSFP+ Port

SSE-X3648S 48 6

SSE-X3648S/SSE-X3648SR Switch Installation Manual

1-2

Back Panel

The SSE-X3648S/SSE-X3648SR switches provides an RJ-45 serial console port in the

rear of the switch. Users perform the local and telnet configuration through this port.

The back panel of the SSE-X3648S/SSE-X3648SR switch also includes two redundant

hot-swappable AC power supply modules, four fans and one rear panel card.

The console port supports asynchronous mode. To set this up just set the data bit as 8,

the stop bit as 1, the parity bit as none, and the default baud rate as 115,200bps.

Cautions:

1. The USB port on the rear panel card only supports data transmission. It does not

support power supply over USB.

2. The rear panel card does not support hot plug.

3. Replacement of the rear panel card must be done by a professional.

1-3 Status LEDs

There are indicator LEDs on the front panel of the SSE-X3648S/SSE-X3648SR

switches. There are 48 SFP+ Port Indicator LEDs, 24 QSFP+ Port Indicator LEDs, two

Power Supply Indicator LEDs, and a System Automatic Diagnosis LED. These LEDs

are described below in Table 1-3, Table 1-4 and Table 1-5.

Figure 1-1. Front Panel of the SSE-X3648S/SSE-X3648SR Switches

Table 1-2. Rear Panel Descriptions of the SSE-X3648S/SSE-X3648SR Switch

Type

10/100/1000Base-T

Ethernet Port

Console Port

USB2.0

Interface

SSE-X3648S 1 1 1

Figure 1-2. Back Panel of the SSE-X3648S/SSE-X3648SR Switch

SFP+ Ports QSFP+ Ports

Power

Supply

Console Ports

Fans

Power

Supply

Fans

USB Port

1-3

Chapter 1: Introduction

Table 1-3. Front Panel Status LEDs

Indicator

Light

Front Panel

Sign

State Description

Power Supply

Indicator Light

P-1/P-2

Green light always on Power supply module operating normally.

No Light No power supply or error.

System Status

Indicate Led

Start

Green light always on

The system is powered on and running

normally.

No Light The system is powered off.

Table 1-4. Rear Panel Status LEDs

Indicator

Light

Rear Panel

Sign

State Meanings

Fan Module

Indicator Light

Fan1/Fan2/

Fan3/Fan4

Green Light Always On Fan module is operating normally.

Red Light Always On No fan module or fan speed is 0

No Light Fan module is powered off

Table 1-5. Port Indicator LEDs

Indicator Light Panel Sign State

Ethernet Port Link

Light (Left)

Green Light Wink The port is transmitting data.

Put Out There is no data transmitting on the port.

Ethernet Port Activity

Light (Right)

Yellow Light Always On The port is configured at 10m/100M speed

Green Light Always On The port is configured at 1000M speed

Put Out No connection or fail to connect.

Indicator Light Of

SFP+ Port

Green Light Always On The port is connected at 10G.

Amber Light Always On The port is connected at 1G.

Wink The port is transmitting data.

Put Out No connection or fail to connect.

Indicator Light Of

QSFP+ Port

Green Light Always On The port is connected at 40G.

Amber Light Always On The port is connected at 4X10G.

Wink The port is transmitting data.

Red Light Always On There is a fault on the port.

Put Out No connection or fail to connect.

SSE-X3648S/SSE-X3648SR Switch Installation Manual

1-4

1-4 Port Description

The SSE-X3648S/SSE-X3648SR provides 48 10Gb SFP+ ports and 6 40Gb QSFP+

ports.

The following SFP transceivers are supported:

• SFP-SX-L transceiver

• SFP-LX-L transceiver

• SFP-LX-20-L 20-km transceiver

• SFP-LX-40 40-km mid distance transceiver

• SFP-LH-70-L 70-km long distance transceiver

• SFP-LH-120-L 120-km long distance transceiver

• SFP-GT 1000 Base-T SFP interface cards module

Table 1-6 describes the ports.

The SSE-X3648S/SSE-X3648SR switch provides six QSFP+ ports and supports

QSFP+ cabling. Users can select from the cables in the Table 1-7 according to their

need.

Table 1-6. SSE-X3648S/SSE-X3648SR Switch Port Description

Port Mode Spec

RJ-45 Port

• 10/100/1000Mbps Auto Negotiation

• MDI/MDI-X Cable Mode Auto Negotiation

QSFP+

• 40GBASE-CR4 Transceiver, Copper, 7m

• 40GBASE-SR4 Transceiver, 850nm, MMF, OM3/OM4, 100m

Table 1-7. Cables Supported by the SSE-X3648S/SSE-X3648SR Switch

Type Manufacturer Model Standard

40G QSFP+ Cable Tyco 2053638-3 30AWG, 3.0m

QSFP+ to 4Xsfp+

Cable

Amphenol 582410007 30AWG, 3.0m

QSFP to QSFP Cable

Molex

747571051 30AWG, 0.5m

747571101 30AWG, 1.0m

747571301 30AWG, 3.0m

1-5

Chapter 1: Introduction

1-5 Power Supply Module

460W Power Module

Figure 1-3 shows the power supply module for the SSE-X3648S/SSE-X3648SR switch.

The SSE-X3648S/SSE-X3648SR switch has two power supply modules, thus providing

redundancy. It provides airflow front to back (SSE-X3648S) or airflow back to front

(SSE-X3648SR).

The maximum power is 460W, while the input is 100VAC~240VAC, and the output is

12V +/- 5%. There is a fan and a handle for inserting or removing the module on the

back of the power supply. The power supply module supports hot-plug replacement.

Figure 1-3. 460W Power Supply Module

SSE-X3648S/SSE-X3648SR Switch Installation Manual

1-6

1-6 Fan Module

Figure 1-4 shows the fan module for the SSE-X3648S/SSE-X3648SR switch.

The SSE-X3648S/SSE-X3648SR switch has four fan modules in its standard

configuration. The rotation speed of the fan self-adjusts to adapt to system temperature,

and provides airflow front to back (SSE-X3648S) and airflow back to front

(SSE-X3648SR).

Cautions:

1. Different airflow fan modules cannot be mixed.

2. Airflow for power modules must be the same as that used for fan modules.

Figure 1-4. Fan Module

1-7

Chapter 1: Introduction

1-7 System Specifications

System specifications are shown in Table 1-8 below.

Table 1-8. System Specifications

Specification Description

Dimensions(W * H * D) (mm) 433.8 * 44 * 550

Weight 10.133 kg

Fixed Port 48 SFP+ ports; 6 QSFP+ ports

Management Port 1 RJ-45 serial console port

Power Input 100~240VAC(50~60Hz) 2.8A~5.6A

System Power Consumption <400W

Operating Temperature 0°C~40°C

Storage Temperature -40°C~75°C

Operating Relative Humidity 10%~90%, no condensate

Storage Relative Humidity 5%~95%, no condensate

SSE-X3648S/SSE-X3648SR Switch Installation Manual

1-8

Notes

2-1

Chapter 2: Standardized Warning Statements

Chapter 2

Standardized Warning Statements

2-1 About Standardized Warning Statements

The following statements are industry standard warnings, provided to warn the user of

situations which have the potential for bodily injury. Should you have questions or

experience difficulty, contact Supermicro's Technical Support department for assistance.

Only certified technicians should attempt to install or configure components.

Read this appendix in its entirety before installing or configuring components in the

Supermicro chassis.

These warnings may also be found on our web site at http://

www.supermicro.com/about/policies/safety_information.cfm.

Warning Definition

Warning!

This warning symbol means danger. You are in a situation that could cause

bodily injury. Before you work on any equipment, be aware of the hazards

involved with electrical circuitry and be familiar with standard practices for preventing

accidents.

此警告符号代表危险。

您正处于可能受到严重伤害的工作环境中。在您使用设备开始工作之前，必须充分意识到

触电的危险，并熟练掌握防止事故发生的标准工作程序。请根据每项警告结尾的声明号码

找到此设备的安全性警告说明的翻译文本。

此警告符號代表危險。

您正處於可能身體可能會受損傷的工作環境中。在您使用任何設備之前，請注意觸電的危

險，並且要熟悉預防事故發生的標準工作程序。請依照每一注意事項後的號碼找到相關的

翻譯說明內容。

SSE-X3648S/SSE-X3648SR Switch Installation Manual

2-2

Warnung

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu

Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren

elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen

vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen

Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten

Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de

manipular cualquier equipo, considere los riesgos de la corriente eléctrica y

familiarícese con los procedimientos estándar de prevención de accidentes. Al final de

cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en

el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES.

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation

pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un

équipement, soyez conscient des dangers liés aux circuits électriques et

familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents.

Pour prendre connaissance des traductions des avertissements figurant dans les

consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro

de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS.

ןןונקת תורהצהאהרהז

ןה תואבה תורהצהא ינפמ שמתשמה תא ריהזהל תנמ לע ,היישעתה ינקת יפ לע תורהז הלבח

ה וא תולאש שיו הדימב .תירשפא תיזיפי ,יהשלכ היעבב תולקתרוציל שי הכימת תקלחמ םע רשק

רידגהל וא ןיקתהל םיאשר דבלב םיכמסומ םיאנכט .ורקימרפוס לש תינכט תאה .םיביכר

אורקל שי .ורקימרפוס יזראמב םיביכרה תרדגה וא תנקתה ינפל ואולמב חפסנה תא

. ﻲﻓ ﻚﻧا نأ ﻦﻜﻤﯾ ﺔﻟﺎﺣ ﻲﻓ ﺐﺒﺴﺘﺗ ﺔﺑﺎﺻا ﺔﯾﺪﺴﺟ ﺰﻣﺮﻟا اﺬھ ﻲﻨﻌﯾ ﺮﻄﺧ !ﺮﯾﺬﺤﺗ

نأ ﻞﺒﻗ يأ ﻰﻠﻋ ﻞﻤﻌﺗ تاﺪﻌﻣ،ﻛﻢﻠﻋ ﻰﻠﻋ ﻦ ﻦﻋ ﺔﻤﺟﺎﻨﻟا ﺮطﺎﺨﻤﻟﺎﺑ ﺮﺋاوﺪﻟا

ﺔﯿﺋﺎﺑﺮﮭﻜﻟا

ﻛوﺔﯾارد ﻰﻠﻋ ﻦ رﺎﻤﻤﻟﺎﺑتﺎﺳ ﺔﯿﺋﺎﻗﻮﻟا ﻟ ﻊﻨﻤعﻮﻗو يأثداﻮﺣ

ﻢﻗر مﺪﺨﺘﺳا نﺎﯿﺒﻟا صﻮﺼﻨﻤﻟا ﺔﯾﺎﮭﻧ ﻲﻓ ﺮﯾﺬﺤﺗ ﻞﻛ رﻮﺜﻌﻠﻟ ﺎﮭﺘﻤﺟﺮﺗ

2-3

Chapter 2: Standardized Warning Statements

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwings symbool betekent gevaar. U verkeert in een situatie die lichamelijk

letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich

bewust te zijn van de bij een elektrische installatie betrokken risico's en dient u op de

hoogte te zijn van de standaard procedures om ongelukken te voorkomen. Gebruik de

nummers aan het eind van elke waarschuwing om deze te herleiden naar de

desbetreffende locatie.

BEWAAR DEZE INSTRUCTIES

Installation Instructions

Warning!

Read the installation instructions before connecting the system to the power

source.

警告

将此系统连接电源前 , 请先阅读安装说明。

警告

將系統與電源連接前，請先閱讀安裝說明。

Warnung

Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen

lesen.

¡Advertencia!

Lea las instrucciones de instalación antes de conectar el sistema a la red de

alimentación.

Attention

Avant de brancher le système sur la source d'alimentation, consulter les directives

d'installation.

אורקל שי רוקמל תכרעמה רוביח ינפל הנקתה תוארוה תאחתמ.

SSE-X3648S/SSE-X3648SR Switch Installation Manual

2-4

Waarschuwing

Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit.

Circuit Breaker

Warning!

This product relies on the building's installation for short-circuit (overcurrent)

protection. Ensure that the protective device is rated not greater than: 250 V,

20 A.

警告

此产品的短路 ( 过载电流 ) 保护由建筑物的供电系统提供 , 确保短路保护设备的额定电流

不大于 250V,20A。

警告

此產品的短路 ( 過載電流 ) 保護由建築物的供電系統提供 , 確保短路保護設備的額定電

流不大於 250V,20A。

Warnung

Dieses Produkt ist darauf angewiesen, dass im Gebäude ein Kurzschluss- bzw.

Überstromschutz installiert ist. Stellen Sie sicher, dass der Nennwert der

Schutzvorrichtung nicht mehr als: 250 V, 20 A beträgt.

¡Advertencia!

Este equipo utiliza el sistema de protección contra cortocircuitos (o sobrecorrientes) del

edificio. Asegúrese de que el dispositivo de protección no sea superior a: 250 V, 20 A.

Attention

Pour ce qui est de la protection contre les courts-circuits (surtension), ce produit dépend

de l'installation électrique du local. Vérifiez que le courant nominal du dispositif de

protection n'est pas supérieur à :250 V, 20 A.

ﻟا تادﺎﺷرإ ﺮﻗاﺐﯿﻛﺮﺘ ﻞﯿﺻﻮﺗ ﻞﺒﻗ ﻰﻟإ مﺎﻈﻨﻟا ﺔﻗﺎﻄﻠﻟ رﺪﺼﻣ

לע ךמתסמ הז רצומנגהה תעינמל םינבמב תנקתומה יכ אדוול שי .ילמשח רצק

רצקה ינפמ ןגמה רישכמה ילמשחהמ רתוי אל אוה-250 V, 20 A

2-5

Chapter 2: Standardized Warning Statements

Waarschuwing

Dit product is afhankelijk van de kortsluitbeveiliging (overspanning) van uw electrische

installatie. Controleer of het beveiligde aparaat niet groter gedimensioneerd is dan

220V, 20A.

Power Disconnection Warning

Warning!

The system must be disconnected from all sources of power and the power

cord removed from the power supply module(s) before accessing the chassis

interior to install or remove system components.

警告

在你打开机箱并安装或移除内部器件前 , 必须将系统完全断电 , 并移除电源线。

警告

在您打開機殼安裝或移除內部元件前，必須將系統完全斷電，並移除電源線。

Warnung

Das System muss von allen Quellen der Energie und vom Netzanschlusskabel getrennt

sein, das von den Spg.Versorgungsteilmodulen entfernt wird, bevor es auf den

Chassisinnenraum zurückgreift, um Systemsbestandteile anzubringen oder zu

entfernen.

ﺞﺘﻨﻤﻟا اﺬھ ﻰﻠﻋ ﺪﻤﺘﻌﯾ تاﺪﻌﻣ ﺔﯾﺎﻤﺤﻟا ةﺮﯿﺼﻘﻟاﺮﺋاوﺪﻟا ﻦﻣ ﺎﮭﺘﯿﺒﺜﺗ ﻢﺗ ﻲﺘﻟا ﻲﻓ

ﻰﻨﺒﻤﻟا

20A, 250V : ﻦﻣ ﺪﻛﺄﺗ نأ ﻢﯿﯿﻘﺗ زﺎﮭﺠﻟا ﻟاﻲﺋﺎﻗﻮ ﺲﯿﻟ ﻦﻣ ﺮﺜﻛأ

SSE-X3648S/SSE-X3648SR Switch Installation Manual

2-6

¡Advertencia!

El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico

quitado de los módulos de fuente de alimentación antes de tener acceso el interior del

chasis para instalar o para quitar componentes de sistema.

Attention

Le système doit être débranché de toutes les sources de puissance ainsi que de son

cordon d'alimentation secteur avant d'accéder à l'intérieur du chassis pour installer ou

enlever des composants de systéme.

Waarschuwing

Voordat u toegang neemt tot het binnenwerk van de behuizing voor het installeren of

verwijderen van systeem onderdelen, dient u alle spanningsbronnen en alle

stroomkabels aangesloten op de voeding(en) van de behuizing te verwijderen.

Equipment Installation

Warning!

Only trained and qualified personnel should be allowed to install, replace, or

service this equipment.

警告

只有经过培训且具有资格的人员才能进行此设备的安装、更换和维修。

警告

只有經過受訓且具資格人員才可安裝、更換與維修此設備。

יילמשח קותינ ינפמ הרהזא

!הרהזא

למשחה תורוקמ לכמ תכרעמה תא קתנל שי ריסהל שיו קפסהמ ילמשחה לבכ תא

נקתה ךרוצל זראמה לש ימינפה קלחל השיג ינפלת רסה ואת .םיביכר

ﻞﺼﻓ ﺐﺠﯾ مﺎﻈﻨﻟا ﻊﯿﻤﺟ ﻦﻣردﺎﺼﻣ ﺔﻗﺎﻄﻟا ﺔﻟازإو ءﺎﺑﺮﮭﻜﻟا ﻚﻠﺳ ﻦﻣ ةﺪﺣو داﺪﻣا

ﺔﻗﺎﻄﻟا ﻞﺒﻗ

ﻰﻟإ لﻮﺻﻮﻟا ﺔﯿﻠﺧاﺪﻟا ﻖطﺎﻨﻤﻟا ﻟﻞﻜﯿﮭﻠ ﺔﻟازإ وأ ﺖﯿﺒﺜﺘﻟ تﺎﻧﻮﻜﻣ زﺎﮭﺠﻟا

Page is loading ...

Supermicro SSE-X3648SR Installation guide

Brand: Supermicro

Model: SSE-X3648SR

Type: Installation guide

This manual is also suitable for

SSE-X3648S

Download PDF

report

Supermicro SSE-X3648SR Installation guide

This manual is also suitable for

Supermicro SSE-X3648SR Installation guide

Related papers

Other documents