Mitsubishi Electric FR-F8AT User manual

Brand: Mitsubishi Electric

Model: FR-F8AT

Type: User manual

Mitsubishi Electric FR-F8AT is an intercompatibility attachment that enables the use of existing mounting holes when replacing the FR-F520L-75K and the FR-F720(P)-75K with the FR-F820-75K inverter. It is designed to make the installation process easier and more efficient. The FR-F8AT comes with a detailed instruction manual that provides clear guidelines for unpacking, checking, and installing the attachment to the inverter. For safety reasons, it is crucial to follow these instructions carefully to avoid any potential hazards during the installation process.

1/4 IB-0600557ENG-A

INVERTER

Intercompatibility attachment

<FR-F8AT01>

Thank you for choosing this Mitsubishi inverter option unit.

This Instruction Manual provides handling information and precautions for use of the equipment.

Incorrect handling might cause an unexpected fault. Before using this product, always read this

Instruction Manual carefully to use this product correctly.

Please forward this Instruction Manual to the end user.

This product is the attachment for replacing the FR-F520L-75K and the FR-F720(P)-

75K with the FR-F820-75K.

The product enables the use of the existing mounting holes as it is.

1 Unpacking and checking the product

Take the product out of the package, and confirm that the product is as you ordered

and intact.

The product is an option for the FR-F820-75K.

SAFETY INSTRUCTIONS

While power is ON or for some time after power-OFF, do not touch the inverter and the

attachment as they will be extremely hot. Touching these devices may cause a burn.

The product must be transported in correct method that corresponds to the weight. Failure

to do so may lead to injuries. Special attention must be paid to the edges of the product.

FR-F8AT (upper side)

FR-F8AT (lower side)

2/4 IB-0600557ENG-A

2 Installing the intercompatibility attachment to the

inverter

(1) Remove the wiring of the existing inverter.

(2) Remove the existing inverter.

(3) Installing the attachment

Replace the upper and lower installation frames of the inverter being replaced with

the upper and lower parts of FR-F8AT respectively.

Use the screws of the upper and lower installation frames to install the FR-F8AT.

(Tightening torque: 22.5 to 30.5 Nm)

(4) Install the inverter equipped with the attachment to the existing mounting holes.

(5) Perform wiring to the installed inverter.

NOTE

• To remove or install the inverter, refer to the inverter Instruction Manual.

FR-F8AT (upper side)

Upper

installation frame

FR-F8AT (lower side)

Lower installation

frame

3/4 IB-0600557ENG-A

3 Outline dimensions

2- 12 hole

4- 25 hole

3.2

Inverter

400

465

Inverter

(250)

65 (610) 65

715 (15)

740

[screw size M10]

FR-F8AT

(upper side)

FR-F8AT (lower side)

4/4 IB-0600557ENG-A

REVISIONS

Print date * Manual number Revision

Oct. 2014 IB(NA)-0600557ENG-A First edition

Mitsubishi Electric FR-F8AT User manual

Mitsubishi Electric FR-F8AT User manual

Mitsubishi Electric FR-F8AT User manual

Related papers

Other documents