Suzuki LT160 User manual

Brand: Suzuki

Model: LT160

Type: User manual

This manual is also suitable for

QUADRUNNER

SUZUKI

QUAD RUNNER

LT160

Instruction Manual

ATV BLADE HARDWARE

KIT NUMBER: 15-4540

CUSTOMER MUST RECEIVE COPY OF THIS OWNERS MANUAL/ INSTRUCTION SHEET AT TIME OF SALE

Ver: 15-4540.1

THANK YOU FOR YOUR PURCHASE OF OUR

SNOW PLOW

ENCLOSED IN THIS KIT IS THE

ATTACHING HARDWARE KIT

TO HAVE A COMPLETE PLOW ASSEMBLY, YOU MUST HAVE AT LEAST FOUR

BOXES:

1. MODEL SPECIFIC ATTACHING HARDWARE KIT. TO

ATTACH UNIVERSAL PUSH TUBE TO ATV.

2. UNIVERSAL PUSH TUBE #15-0001

3. BLADE OF YOUR CHOICE (COLOR, STYLE, & SIZE)

4. YOUR CHOICE OF BLADE LIFT METHODS,

a. UNIVERSAL MANUAL LIFT #15-0010

b. ELECTRIC BLADE LIFT #10-0100

c. USE YOUR WINCH TO RAISE AND LOWER YOUR

BLADE.

FOR SERVICE OR TECHNICAL SUPPORT CALL 1-800-841-2222

15-4540

Attaching Bracket Kit

Parts List

FRONT OF ATV

ITEM NO. PART NO. QTY. DESCRIPTION

1 S1800 1 Attaching Bracket

2 S1801 2 Support Bar

3 S1803 2 Attaching Bracket Strap

4 UB516-1142 2 5/16" x 1-1/4" x 2" U-Bolt

5 CB516-1 4 5/16" x 1" Carriage Bolt

LN516NY 8 5/16" Nylock Nut

6 MB8-30 4 8 x 30 Metric Bolt

7 CP38-1 2 3/8" Clevis Pin

8 HP3 2 #3 Hair Pin

WARNING

¾ Due to reduced ground clearance remove plow Mount Brackets before trail riding.

¾ Do not exceed 5 MPH with the blade or its brackets installed

♦ Periodically check for wear and tightness of all bolts, nuts and

fasteners. Replace or tighten as necessary

All directions referring to the right and the left are when the

operator is sitting on the ATV.

Attaching Bracket Installation Instructions

1. Using the four 5/16” x 1” Carriage Bolts (#5) secure the Bracket Straps (#3) and the Support

Bars (#2) to the Attaching Bracket (#1). See Parts Breakdown. Position the Support Bars

toward the front of the machine and angled slightly toward the center. Do Not tighten

Carriage bolts at this time.

2. Remove the Bolts from the foot pegs; retain bolts for use when Attaching Kit is not installed.

Position the Attaching Bracket against the mainframe tubes directly under the foot pegs.

Using the Provided 8 x 30mm Bolts, attach the Bracket Straps to the foot peg. Tighten Fully.

3. Using the two 5/16” x 1 1/4” x 2” U-Bolts (#5) secure the two Support Bars (#2) to the

ATV’s outside mainframe tubes. Do not over tighten the U-bolts, damage to frame may

occur. Tight Carriage Bolts fully at this time.

Left Side Shown

Suzuki LT160 User manual

Brand: Suzuki

Model: LT160

Type: User manual

This manual is also suitable for

QUADRUNNER

Download PDF

report

Suzuki LT160 User manual

This manual is also suitable for

Suzuki LT160 User manual

Other documents