Philips 233V5 User manual

www.philips.com/welcome

233V5

EN User manual 1

Customer care and warranty 28

Troubleshooting & FAQs 33

Table of Contents

1. Important ................................................1

1.1 Safety precautions and maintenance ...1

1.2 Notational Descriptions .............................2

1.3 Disposal of product and packing

material ................................................................3

2. Setting up the monitor .........................4

2.1 Installation ...........................................................4

2.2 Operating the monitor ...............................6

2.3 Remove Base Stand and Base .................9

3. Image Optimization .............................10

3.1 SmartContrast ..............................................10

3.2 Philips SmartControl Lite .......................10

4. Technical Specifications ......................17

4.1 Resolution & Preset Modes...................20

5. Power Management ............................21

6. Regulatory Information ......................22

7. Customer care and warranty ...........28

7.1 Philips’ Flat Panel Monitors Pixel

Defect Policy ..................................................28

7.2 Customer Care & Warranty .................30

8. Troubleshooting & FAQs ...................33

8.1 Troubleshooting ...........................................33

8.2 General FAQs ...............................................34

1

1. Important

This electronic user’s guide is intended for

anyone who uses the Philips monitor. Take time

to read this user manual before you use your

monitor. It contains important information and

notes regarding operating your monitor.

The Philips guarantee applies provided the

product is handled properly for its intended use,

in accordance with its operating instructions and

upon presentation of the original invoice or cash

receipt, indicating the date of purchase, dealer’s

name and model and production number of the

product.

1.1 Safety precautions and mainte-

nance

Warnings

Use of controls, adjustments or procedures

other than those specified in this documentation

may result in exposure to shock, electrical

hazards and/or mechanical hazards.

Read and follow these instructions when

connecting and using your computer monitor.

Operation

• Please Keep the monitor out of direct

sunlight, very strong bright lights and

away from any other heat source. Lengthy

exposure to this type of environment may

result in discoloration and damage to the

monitor.

• Remove any object that could fall into

ventilation holes or prevent proper cooling

of the monitor’s electronics.

• Do not block the ventilation holes on the

cabinet.

• When positioning the monitor, make sure

the power plug and outlet are easily ac-

cessible.

• If turning off the monitor by detaching the

power cable or DC power cord, wait for 6

seconds before attaching the power cable

or DC power cord for normal operation.

• Please use approved power cord provided

by Philips all the time. If your power cord

is missing, please contact with your local

service center. (Please refer to Customer

Care Consumer Information Center)

• Do not subject the monitor to severe

vibration or high impact conditions during

operation.

• Do not knock or drop the monitor during

operation or transportation.

Maintenance

• To protect your monitor from possible

damage, do not put excessive pressure on

the LCD panel. When moving your moni-

tor, grasp the frame to lift; do not lift the

monitor by placing your hand or fingers on

the LCD panel.

• Unplug the monitor if you are not going to

use it for an extensive period of time.

• Unplug the monitor if you need to clean it

with a slightly damp cloth. The screen may

be wiped with a dry cloth when the power

is off. However, never use organic solvent,

such as, alcohol, or ammonia-based liquids

to clean your monitor.

• To avoid the risk of shock or permanent

damage to the set, do not expose the

monitor to dust, rain, water, or excessive

moisture environment.

• If your monitor gets wet, wipe it with dry

cloth as soon as possible.

• If foreign substance or water gets in your

monitor, please turn the power off immedi-

ately and disconnect the power cord. Then,

remove the foreign substance or water, and

send it to the maintenance center.

• Do not store or use the monitor in loca-

tions exposed to heat, direct sunlight or

extreme cold.

• In order to maintain the best performance

of your monitor and use it for a longer life-

time, please use the monitor in a location

that falls within the following temperature

and humidity ranges.

2

1. Important

• Temperature: 0-40°C 32-95°F

• Humidity: 20-80% RH

Important information for Burn-in/Ghost

image

• Always activate a moving screen saver

program when you leave your monitor

unattended. Always activate a periodic

screen refresh application if your monitor

will display unchanging static content.

Uninterrupted display of still or static

images over an extended period may

cause “burn in”, also known as “after-

imaging” or “ghost imaging”, on your

screen.

"Burn-in", "after-imaging", or "ghost imag-

ing" is a well-known phenomenon in LCD

panel technology. In most cases, the

“burned in” or “after-imaging” or “ghost

imaging” will disappear gradually over a

period of time after the power has been

switched off.

Warning

Failure to activate a screen saver, or a periodic

screen refresh application may result in severe”

burn-in” or “after-image” or “ghost image”

symptoms will not disappear and cannot be

repaired. The damage mentioned above is not

covered under your warranty.

Service

• The casing cover should be opened only

by qualified service personnel.

• If there is any need for any document for

repair or integration, please contact with

your local service center. (please refer to

the chapter of "Consumer Information

Center")

• For transportation information, please

refer to "Technical Specifications".

• Do not leave your monitor in a car/trunk

under direct sun light.

Note

Consult a service technician if the monitor

does not operate normally, or you are not sure

what procedure to take when the operating

instructions given in this manual have been

followed.

1.2 Notational Descriptions

The following subsections describe notational

conventions used in this document.

Notes, Cautions and Warnings

Throughout this guide, blocks of text may be

accompanied by an icon and printed in bold or

italic type. These blocks contain notes, cautions

or warnings. They are used as follows:

Note

This icon indicates important information and

tips that help you make better use of your

computer system.

Caution

This icon indicates information that tells you

how to avoid either potential damage to

hardware or loss of data.

Warning

This icon indicates the potential for bodily harm

and tells you how to avoid the problem.

Some warnings may appear in alternate formats

and may not be accompanied by an icon. In such

cases, the specific presentation of the warning is

mandated by the relevant regulatory authority.

3

1. Important

1.3 Disposal of product and packing

material

Waste Electrical and Electronic Equipment-

WEEE

This marking on the product or on its

packaging illustrates that, under European

Directive 2002/96/EC governing used electrical

and electronic appliances, this product may

not be disposed of with normal household

waste. You are responsible for disposal of

this equipment through a designated waste

electrical and electronic equipment collection.

To determine the locations for dropping off

such waste electrical and electronic, contact

your local government office, the waste disposal

organization that serves your household or the

store at which you purchased the product.

Your new monitor contains materials that can

be recycled and reused. Specialized companies

can recycle your product to increase the

amount of reusable materials and to minimize

the amount to be disposed of.

All redundant packing material has been

omitted. We have done our utmost to make the

packaging easily separable into mono materials.

Please find out about the local regulations on

how to dispose of your old monitor and packing

from your sales representative.

Taking back/Recycling Information for

Customers

Philips establishes technically and economically

viable objectives to optimize the environmental

performance of the organization's product,

service and activities.

From the planning, design and production

stages, Philips emphasizes the important of

making products that can easily be recycled. At

Philips, end-of-life management primarily entails

participation in national take-back initiatives

and recycling programs whenever possible,

preferably in cooperation with competitors,

which recycle all materials (products and related

packaging material) in accordance with all

Environmental Laws and taking back program

with the contractor company.

Your display is manufactured with high quality

materials and components which can be

recycled and reused.

To learn more about our recycling program

please visit

http://www.philips.com/sites/philipsglobal/

about/sustainability/ourenvironment/

productrecyclingservices.page

4

2. Setting up the monitor

2.1 Installation

Package contents

VGA (optional)

DVI (optional)

Audio cable (optional)Power cable

Register your product and get support at

www.philips.com/welcome

233V5

Quick

Start

SmartControl software

Monitor drivers

M

5

2

3

V

1

L

F

7

0

G

2

3

C

1

8

1

3

1

5

A

使用产品前请阅读使用说明

保留备用

Install base stand

1. Place the monitor face down on soft

and smooth surface taking care to avoid

scratching or damaging the screen.

2. Attach/Slide the base column with the

monitor until it clicks into position.

3. Hold the monitor base stand with both

hands and firmly insert the base stand into

the base column.

5

2. Setting up the monitor

Connecting to your PC

233V5LSB

4

AC power input

VGA input

DVI-D input (available for selected models)

Kensington anti-theft lock

233V5LAB

6

4

5

AC power input

VGA input

DVI-D input

Earphone output

Audio input

Kensington anti-theft lock

233V5LHAB

6

4

5

AC power input

VGA input

HDMI input

Earphone output

Audio input

Kensington anti-theft lock

Connect to PC

1. Connect the power cord to the back of

the monitor firmly.

2. Turn off your computer and unplug its

power cable.

3. Connect the monitor signal cable to the

video connector on the back of your

computer.

4. Plug the power cord of your computer and

your monitor into a nearby outlet.

5. Turn on your computer and monitor. If the

monitor displays an image, installation is

complete.

6

2. Setting up the monitor

2.2 Operating the monitor

Front view product description

233V5LSB

5

6 2347

Switch monitor’s power ON and

OFF.

Access the OSD menu

.

Confirm the OSD adjustment.

Return to previous OSD level.

Adjust the brightness level.

Adjust the OSD menu.

Change display format.

Automatically adjust the monitor.

233V5LAB, 233V5LHAB

5

6 2347

Switch monitor’s power ON and

OFF.

Access the OSD menu

.

Confirm the OSD adjustment.

Return to previous OSD level.

Adjust the brightness level.

Adjust the OSD menu.

Adjust the speaker volume.

Automatically adjust the monitor.

7

2. Setting up the monitor

Description of the On Screen Display

What is On-Screen Display (OSD)?

On-Screen Display (OSD) is a feature in all

Philips LCD monitors. It allows an end user to

adjust screen performance or select functions

of the monitors directly through an on-screen

instruction window. A user friendly on screen

display interface is shown as below:

233V5LAB:















233V5LSB:













 

233V5LSB (for Analog only model):







 



 







 







233V5LHAB:















Basic and simple instruction on the control

keys

In the OSD shown above, you can press

buttons at the front bezel of the monitor

to move the cursor, and press OK button to

confirm the choice or change.

8

2. Setting up the monitor

The OSD Menu

Below is an overall view of the structure of

the On-Screen Display. You can use this as a

reference when you want to work your way

around the different adjustments later on.

Main menu Sub menu

Picture

Wide Screen, 4:3

0~100

Picture Format

Brightness

Contrast

OSD Settings

0~100

Off, 1, 2, 3, 4

5s, 10s, 20s, 30s, 60s

Horizontal

Vertical

Transparency

OSD Time Out

Setup

0~100

On, Off

Yes, No

0~100

H. Position

Auto

V. Position

Phase

Clock

Resolution Notification

Reset

Information

Language

English,Español,Français,Deutsch,Italiano,

Nederlands, Svenska, Suomi, Polski, Čeština

한국어,

日本語, Maryar, Українська,

Português do Brazil, Ελληνική , 繁體中文

Português,Русский,简体中文,

Türkçe,

Color

6500K, 9300K

Red: 0~100

Green: 0~100

Blue: 0~100

Color Temperature

sRGB

User Define

Audio

0~100

On, Off

Volume

Mute

(available for selective models)

VGA

HDMI

DVI

Input

On, Off

SmartContrast

On, Off

Over scan

1.8, 2.0, 2.2, 2.4, 2.6

Gamma

Resolution notification

This monitor is designed for optimal

performance at its native resolution, 1920 ×

1080 @ 60 Hz. When the monitor is powered

on at a different resolution, an alert is displayed

on screen: Use 1920 × 1080 @ 60 Hz for best

results.

Display of the native resolution alert can be

switched off from Setup in the OSD (On

Screen Display) menu.

Physical Function

Tilt

9

2. Setting up the monitor

2.3 Remove Base Stand and Base

Remove the Base Stand

Before you start disassembling the monitor

base, please follow the instructions below to

avoid any possible damage or injury.

1. Place the monitor face down on a smooth

surface, taking care to avoid scratching or

damaging the screen.

2. Press the locking clips to detach the base

stand away from the base column.

1

3. Press the release button to detach the base

column.

2

Note

This monitor accepts a 100mm x 100mm VESA-

Compliant mounting interface.

Caution

For use only with UL Listed Wall Mount Bracket

with minimum weight/load 3.5Kg

100mm

10

3. Image Optimization

3.1 SmartContrast

What is it?

A unique technology that dynamically analyzes

displayed content and automatically optimizes

an LCD monitor's contrast ratio for maximum

visual clarity and viewing enjoyment, stepping

up backlighting for clearer, crisper and brighter

images or dimming backlighting for clear display

of images on dark backgrounds.

Why do I need it?

You want the very best visual clarity and

viewing comfort for every type of content.

SmartContrast dynamically controls contrast

and adjusts backlighting for clear, crisp, bright

gaming and video images or displays clear,

readable text for office work. By reducing your

monitor's power consumption, you save on

energy costs and extend the lifetime of your

monitor.

How does it work?

When you activate SmartContrast, it will analyse

the content you are displaying in real time to

adjust colors and control backlight intensity. This

function will dynamically enhance contrast for a

great entertainment experience when viewing

videos or playing games.

3.2 Philips SmartControl Lite

The new SmartControl Lite software by Philips

allows you to control your monitor via an easy

to use on-screen graphic interface. Complicated

adjustments are a thing of the past as this user

friendly software guides you through fine-

tuning resolution, Color calibration, Clock/Phase

adjustments, RGB White point adjustment, etc.

Equipped with latest technology in core

algorithm for fast processing and response, this

Windows 7 compliant eye catching animated

Icon based software is ready to enhance your

experience with Philips monitors!

Installation

• Follow the instruction and complete the

installation.

• You can launch after installation is

completed.

• If you want to launch later, you can either

click the shortcut on desktop or toolbar.

First launch -Wizard

• The first time after installation of

SmartControl Lite, it will automatically go

to Wizard for first time launch.

• The wizard will guide you through adjusting

your monitor performance step by step.

• You can go to Plug-in menu to launch

wizard later on as well.

• You can adjust more options without

wizard by Standard pane.

11

3. Image Optimization

Start with Standard pane:

Adjust menu:

• Adjust Menu allow you to adjust Brightness,

Contrast, Focus, Position and Resolution.

• You can follow the instruction and do the

adjustment.

• Cancel prompts user if you want to cancel

installation.

12

3. Image Optimization

Color menu:

• Color Menu allow you to adjust RGB, Black

Level, White Point, and Color Calibration.

• You can follow the instruction and do the

adjustment.

• Refer to below table for sub-menu item

base on your input.

• Example for Color Calibration:

13

3. Image Optimization

1. "Show Me" starts color calibration tutorial.

2. Start - starts the 6-step color calibration

sequence.

3. Quick View loads the before/after images.

4. To return to Color home pane, click the

Cancel button.

5. Enable color calibration - by default is on.

If unchecked, does not allow for color

calibration to happen, dimes out start and

quick view buttons.

6. Must have patent info in calibration screen.

First color Calibration Screen:

• Previous button is disabled until the second

color screen.

• Next goes to the succeeding target

(6-targets).

• Final next goes File>Presets pane.

• Cancel closes the UI and returns to the

plug in page.

Options>Preferences - Will only be active

when selecting Preferences from the drop-

down Options menu. On a non-supported

display capable of DDC/CI, only the Help and

Options tabs are available.

• Displays current preference settings.

• A checked box enables the feature. The

check box is a toggle.

• Enable Context Menu on desktop is

checked (On) by default. Enable Context

menu displays SmartControl Lite selections

for Select Preset and Tune Display in the

desktop right-click context menu. Disabled

removes SmartControl Lite from the right

click context menu.

• Enable Task Tray icon is checked (On) by

default. Enable context menu shows the

task tray menu for SmartControl Lite. A

right click on the task tray icon displays the

menu options for Help, Technical Support,

Check for Upgrade, About, and Exit. When

Enable task tray menu is disabled, the task

tray icon will only display EXIT.

• Run at Startup is checked (On) by default.

When disabled, SmartControl Lite will not

launch at start or be in the task tray. The

only way to launch SmartControl Lite is

either from the desktop short cut or from

the program file. Any preset set to run

14

3. Image Optimization

at startup will not load when this box is

unchecked (Disabled).

• Enable transparency mode (Windows 7,

Vista, XP). Default is 0% Opaque.

Options>Input - Will only be active when

selecting Input from the drop-down Options

menu. On a non-supported display capable of

DDC/CI, only the Help and Options tabs are

available. All other SmartControl Lite tabs are

not available.

• Display the Source instruction pane and

current input source setting.

• On single input displays, this pane will not

be visible.

Options>Audio - Will only be active when

selecting Audio from the drop-down Options

menu.

On a non-supported display capable of DDC/

CI, only the Help and Options tabs are available.

Help>User Manual - Will only be active when

selecting User Manual from the drop-down

Help menu. On a non-supported display

capable of DDC/CI, only the Help and Options

tabs are available.

Help>Version - Will only be active when

selecting Version from the drop- down Help

menu. On a non-supported display capable of

DDC/CI, only the Help and Options tabs are

available.

15

3. Image Optimization

Context Sensitive menu

The Context Sensitive menu is Enabled by

default. If Enable Context Menu has been

checked in the Options>Preferences pane, then

the menu will be visible.

The Context Menu has three entries:

• SmartControl Lite - When selected the

About Screen is displayed.

• Select Preset - Provides a hierarchical

menu of saved presets for immediate use.

A check mark shows the currently selected

preset. Factory Preset can also be called

from the drop down menu.

• Tune Display - Opens the SmartControl

Lite control panel.

Task Tray Menu Enabled

The task tray menu can be displayed by right-

clicking on the SmartControl Lite icon from the

task tray. Left Click will launch the application.

The task tray has five entries:

• Help - Access to User Manual file: Open

User Manual file using the default browser

window.

• Technical Support - displays the tech

support page.

• Check for Update - takes the user to PDI

Landing and checks the user’s version

against the most current available.

• About - Displays detailed reference

information: product version, release

information, and product name.

• Exit - Close SmartControl Lite.

To run SmartControl Lite again either select

SmartControl Lite from Program menu, double-

click the desktop PC icon or restart the system.

Task Tray Menu Disabled

When the Task Tray is disabled in the preference

folder, only the EXIT selection is available.

To completely remove SmartControl Lite

from the task tray, disable Run at Startup in

Options>Preferences.

16

3. Image Optimization

Note

All the illustrations in this section are for

reference only. SmartControl software version

might be changed without notification. Please

always check official Portrait website

www.portrait.com/dtune/phl/enu/index

to download the latest version of SmartControl

software.

17

4. Technical Specications

4. Technical Specifications

Picture/Display

Monitor Panel Type TFT-LCD

Backlight LED

Panel Size 23" W (58.4cm)

Aspect Ratio 16:9

Pixel Pitch

0.265x 0.265 mm

Brightness 250 cd/m²

SmartContrast 10,000,000:1

Contrast Ratio (typ.) 1000:1

Response Time (typ.) 5ms

Optimum Resolution 1920 x 1080 @ 60Hz

Viewing Angle 170° (H) / 160° (V) @ C/R > 10

Display Colors 16.7M

Vertical Refresh Rate 56Hz - 76Hz

Horizontal Frequency 30kHz - 83kHz

sRGB YES

Connectivity

Signal Input

233V5LSB, 233V5LAB: VGA(Analog), DVI(Digital,HDCP)

(available for selected models)

233V5LHAB:VGA(Analog), HDMI(Digital,HDCP)

Audio In/Out 233V5LAB, 233V5LHAB: PC audio-in, Earphone out

Input Signal Separate Sync, Sync on Green

Convenience

User Convenience

233V5LSB:

233V5LAB, 233V5LHAB:

OSD Languages

English, French, German, Spanish, Italian, Russian,

Simplified Chinese, Portuguese, Turkish, Dutch, Swedish, Finnish,

Polish, Czech, Korean, Japanese, Hungarian, Ukraine, Brazil

Portuguese, Greek, Traditional Chinese

Other Convenience Kensington Lock

Plug & Play Compatibility

DDC/CI, sRGB, Windows 7/Windows 8/Vista/XP, Mac OSX,

Linux

VESA mount 100x100 mm

Stand

Tilt -5 / +20

233V5LAB:

Power

On Mode 21.31 W (typ.), 26.15 W (max.)

Sleep (Standby) 0.5W

18

4. Technical Specications

Off 0.5W

Power LED indicator On mode: White, Standby/Sleep mode: White (blinking)

Power Supply Built-in, 100-240VAC, 50-60Hz

233V5LSB:

Power

On Mode

21.55 W (typ.), 22.22 W (max.)

or 21.55 W (typ.), 24.23W (max.) (for Analog only model)

Sleep (Standby) 0.5W

Off 0.5W

Power LED indicator On mode: White, Standby/Sleep mode: White (blinking)

Power Supply Built-in, 100-240VAC, 50-60Hz

233V5LHAB:

Power

On Mode 21.02 W (typ.), 28.51 W (max.)

Sleep (Standby) 0.5W

Off 0.3W

Power LED indicator On mode: White, Standby/Sleep mode: White (blinking)

Power Supply Built-in, 100-240VAC, 50-60Hz

Dimension

Product with stand (WxHxD) 547 x 416 x 219 mm

Product without stand

(WxHxD)

547 x 340 x 53 mm

Weight

Product with stand 3.5kg

Product without stand 3.13kg

Product with packaging 4.985kg

Operating Condition

Temperature range (operation) 0°C to 40 °C

Temperature range

(Non-operation)

-20°C to 60°C

Relative humidity 20% to 80%

MTBF 30,000hrs

Environmental

ROHS YES

EPEAT Silver (www.epeat.net)

Packaging 100% recyclable

Energy Star YES

Compliance and standards

Regulatory Approvals

CE Mark, FCC Class B, CU, SEMKO, BSMI, ETL,

ISO9241-307, TCO Certified, SASO, EPA, CB, PSB, KUCAS

Page is loading ...

Philips 233V5 User manual

This manual is also suitable for

Philips 233V5 User manual

Related papers

Other documents