HzMMB-UT
INSTALLATION GUIDE
Call Customer Service
1.888.213.5015
Mon-Fri 8am-6pm EST
Questions?
Visit us online for product support, guides and videos
www.leonspeakers.com/support
Completed Install
HzMMB-UT : Horizon Ultra-Thin MatchMount Bracket
Leon’s Horizon Ultra-Thin MatchMount Bracket can be used to mount your
Leon Horizon speaker directly to the wall, above or below any TV. This versatile
bracket offers multiple points of adjustment for a perfect fit, every time.
Template
1x
Ultra-Thin MatchMount Bracket : HzMMB-UT
Bracket Hardware
*Not to scale
Bracket
2x
Foam Tape
1x
1x
Hex Key
4x4x 4x
Wood Screw
Bonded Washer
Drywall Anchor / Screw
For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
Parts List
*Not to scale
Mounting Bolt ~
Lock Nut ~
Drywall Anchor ~
~ Bonded Washer
~ Bracket
~ Bracket
~ Drywall Screw
~ Template
~ Speaker
Ultra-Thin MatchMount Bracket : HzMMB-UT
- 6 -
Mount TV level to wall
and draw Guide Line level with TV edge*
*Top or Bottom dependent on speaker position
2 people suggested for TV mounting
For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
- 7 -
Align Template level with TV edge*
or Guide Line and secure to wall
Template can be secured with masking tape (not provided)
1x
Template
Guide Line
Ultra-Thin MatchMount Bracket : HzMMB-UT
- 8 -
Place Brackets in Template
and mark Pilot Holes*
*Mark holes towards top of Bracket
2x
Bracket
For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
- 9 -
Remove Brackets and drill* Pilot Holes
at mark locations
*3/32” bit for Wood Screws
*5/16” bit for Drywall Anchors
Ultra-Thin MatchMount Bracket : HzMMB-UT
- 10 -
Attach Bracket to wall using Bonded Washers
with Wood Screws or Drywall Anchors
2x 4x 4x 4x
Wood Screw Bonded WasherBracket Drywall Anchor
Wall
TV Face
Speaker Face
Measure depth from face of TV to the Wall
and adjust speaker Mounting Bolts to match
Mounting Bolts come pre-installed
For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
- 11 -
Front View
Side View
Remove Template and hang speaker
by securing Top Mounting Bolts in Brackets
Top Mounting Bolts come pre-installed
Ultra-Thin MatchMount Bracket : HzMMB-UT
- 12 -
flush
Adjust Mounting Bolts to align
Speaker flush with TV
Bottom Mounting Bolts can adjust speaker tilt
Front of speaker aligned with front of TV
Side View
For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
- 13 -
Adjust Lock Nuts to secure assembly
Lock Nuts come pre-installed
Side View
Ultra-Thin MatchMount Bracket : HzMMB-UT
- 14 -
For assistance, call: 1.888.213.5015 | Mon-Fri 8am-6pm EST
- 15 -
Tighten all Screws & Connections
and connect Wiring to Speaker
*Ensure flush TV/Speaker alignment before tightening
*You can adjust vertical alignment by sliding the mounting plates
715 W. Ellsworth Road Ann Arbor, Michigan 48108 | 1.888.213.5015 | www.leonspeakers.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Mounting Dream MD2413-KT User manual
-
-
Mounting Dream MD2295 User manual
-
-
PERLESMITH PSLFK5 User manual
-
-
-
-
-
Wilson Electronics 304451 User manual