Omcan HLC300 User manual

Brand: Omcan

Model: HLC300

Type: User manual

Vegetable Cutter

Model HLC300

Instruction Manual

Version 1

1-800-465-0234

www.omcan.com

3115 Pepper Mill Court, Mississauga, ON, L5L 4X5

4450 Witmer Industrial Estates, Unit 4, Niagara Falls, NY, 14305

Page

-------------------------------------------------------------------------------- 3

------------------------------------------------------------------------------ 3 - 4

-------------------------------------------------------------------------- 4

--------------------------------------------------------------------------------------- 4 - 5

----------------------------------------------------------------------------------------- 5 - 7

------------------------------------------------------------------------------------- 7 - 8

------------------------------------------------------------------------------------- 8

---------------------------------------------------------------------------- 9 - 10

---------------------------------------------------------------------------- 11

---------------------------------------------------------------------------- 13

Table of Contents

Section

General Information

Safety & Warranty

Technical Specications

Installation

Operation

Maintenance

Troubleshooting

Parts Breakdowns

Electrical Schematics

Warranty Registration

Model HLC300

General Information

Safety and Warranty

Omcan Manufacturing and Distributing Company Inc. and Food Machinery Of America, Inc. dba Omcan

are not responsible for any harm or injury caused due to any person’s improper or negligent use of

this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and

not under the inuence of any drugs or alcohol, who has been trained in the correct operation of this

machine, and is wearing authorized, proper safety clothing. Any modication to the machine voids any

warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while

in operation.

• Thevegetablecuttingmachinemustbeoperatedbyskilledpersonnelwhoarefamiliarwiththeinstructions

containedinthismanual.

• Inthecaseofachangeinpersonnel,trainingisnecessary.

• Donottouchanymovingpartsorthecuttingdisc.

• Beforeanycleaningormaintenance,turnthemachineoffanddisconnectitfromtheelectricalsocket.

• Periodicallycheckthecablesandelectriccomponentsofthemachine.

• Nevercutfrozenfood.

• Allrepairsaretobedonebyqualiedtechnicians.

• Onlyuseoriginalspareparts.

MECHANICAL SAFETY FEATURES

ThevegetablecuttingmachinecomplieswiththeregulationsissuedbyGB4706.38-2003.

ELECTRICAL SAFETY FEATURES

TheunitcomplieswiththeregulationsCenelecGB4706.38-2003.Amicroswitchismountedonthemachineto

stopoperationwhenthecoverisopened.Anothermicroswitchisplacedontheinletoftheunit.Restartingthe

machinemustbeperformedbytheoperatorwhenthemicroswitchistripped,shuttingoffthemachine.

Pic.1

Safety and Warranty

Technical Specications

Installation

HP 0.75

DiscSpeed 270RPM

MouthOpening 5.11”×2.16”

Electrical 110V/60/1

Weight 50.6lbs.

Dimensions(DWH) 19”×9”×19.70”

1 YEAR WARRANTY

WARNING:

Thepackagingcomponentsareclassiedasnormalsolidurbanwasteandcanthereforebedisposedof

withoutdifculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Themachineconnectionandthesettingatworkmustbemadebyskilledpersonnel.

WARNING

Boththesystemandlocationwheretheequipmentishastocomplywithalllocalregulations.Omcandenies

anyandallresponsibilityfordirectorindirectdamagedorinjurywhichmayensuefromnotcomplyingwiththe

abovementionedregulations.Settheequipmentonawide,level,dryandxedarea.Theunitmustbefarfrom

heatandwatersources.

ELECTRIC CONNECTIONS

Theequipmentissuppliedwithanelectriccabletobeconnectedtoamagentothermicmainswitch.Itis

imperativethattheequipmentisproperlygroundedaccordingandcomplieswithallregulations.

Installation

Operation

OMCAN DECLINES ANY AND ALL RESPONSIBILITY FOR DIRECT AND INDIRECT

DAMAGES WHICH MAY ENSUE FROM NOT COMPLYING WITH THE REGULATIONS.

THE CUTTING MACHINE IS MANUFACTURED INTO 110V/1/60HZ SETTINGS.

WARNING: OPEN THE COVER, ROTATE THE SIDE HANDLE AND REMOVE THE

CUTTING DISC (IF ANY) WITH THE MACHINE STOPPED, (OR WITH THE WHITE

PLASTIC EJECTOR ONLY), THROUGH THE UPPER (ROUND) OPENING. BY PRESSING

THE START GREEN BUTTON FOLLOWED BY THE RED STOP BUTTON, CHECK TO

MAKE SURE THE CENTRAL PIN DIRECTION OF ROTATION IS COUNTERCLOCKWISE.

IF THE DIRECTION OR ROTATION IS NOT CORRECT, REVERSE THE SUPPLY WIRES.

SAFETY MEASURES AND TRAINING

Theskilledpersonnelinchargeoftheinstallationandelectricconnectionsoftheequipmentisresponsiblefor

thetrainingoftheoperatorandinformingtheoperatorofallsafetymeasurestocomplywith.Thisinstruction

manualcomeswitheachunit.

CONTROLS

Thecontrolsandpilotlightareontherightsideofthebasewhenthe

machineislocatedinfrontoftheoperator.

1. Greenbuttonforstartingthemachine.

2. Redbuttonforstoppingthemachine.

Pic.2

Pic.3

Operation

SETTING THE DISCS ON THE MACHINE

Rotatetheknobasshownbelowandopenthecover.Firstsettheplasticejectingdisc(Pic.5),thenthe

discselectedforthecutting.Closethecoverandreversetherotationofthehandle.Usethestartbuttonto

automaticallyhookthediscsinthecorrectposition.

SETTING AND CUTTING THE FOOD

Liftthehandleandsetthefoodinsidetheproductopening,thenclosethehandle.Pressthegreenstartbutton

withyourrighthandandwithyourlefthand,lightlypushthehandledownwardsuntilfoodisfullyused.Lift

thehandletoputinmorefood.Themachinestartsautomaticallywhenthehandleisclosed.Repeatthese

operationsuntilallfoodisused.Itispossibletousethetwoopeningswithasingledisc.Whentwodiscsare

usedforcuttingsticksandmatch-lifefood,theinletopeningsetoverthegridmustbeused.Thesmallerround

openingisusedtocutvegetableslikecarrots,vegetablemarrows,etc.

WARNING: NEVER USE THE HAND TO PRESS DOWN THE PRODUCT, BUT USE THE

PESTLE SUPPLIED.

Pic.6

Pic.4-CoverOpening Pic.5-DiscPosition

Operation

Maintenance

REPLACEMENT OF THE DISCS

Turnoffandunplugthemachine.TurntheknobandliftthecovershowninPic.4.Turnthedisc

counterclockwiseandcoverthecuttingedgewithappropriatematerial(rubber,fabric,etc.).Thenliftitby

settingyourhandunderthedisc.Liftthediscstoremoveit(Pic.7and8).

Pic.7

Pic.9

Pic.8

Beforecarryingoutanycleaningormaintenanceoperations,turnthemachineoffandunplugitfromthe

socket.Cleantheunitanddiscseveryday.Thediscs,gridandplasticejectorcanberemovedforwashing

underawarmwaterjet.Cleanthemachineandallotherareaswithawetclotheorspongeandwarmwater.

Removeallwastesfromthemachineduringcleaning.Openthecoverandloosenthetwopins,asshown

before,toremovethecoverandwashitunderawaterjet.

Maintenance

Troubleshooting

Cleanthesurfaceswithwater,alcoholordetergentsthatarenotabrasive.Neverusedamagingtoolstoassist

inthecleaningofthemachine(suchassteelwool).Thismaycausedamagetothemachine.Useofnon-toxic

productswhichwillproducethebestresults.

PERIODS OF INACTIVITY

Shouldthemachinebeidleforalongperiodoftime,disconnectthemainwallswitchandcleanthemachine

anditsaccessoriesthoroughly.Usefoodgrademineraloil(27336)toprotectallthemachine’scomponents.

Thishelpspreventmoistureanddirtfromgettinginsidethemachine.Itisadvisedtocoverthemachinewitha

nylon(orsimilar)cloth.

Whenthepilotlightison,butthemachinedoesnotstart,checktomakesurethatthehandleandcoverare

closed.Thesearethelocationsofthemicroswitchesandthemachinewillnotstartiftheyarenotcorrectly

xed.Intheeventofotherproblems,turnthemachineoffandunplugit.Donottrytostartortamperwiththe

equipment.Letaqualiedtechniciansolvetheproblem.ContacttheOmcanServiceCenterat1-800-465-0324

tondaqualiedtechnician.

Parts Breakdown

Model HLC300 19476

HLC-300

Parts Breakdown

Model HLC300 19476

Item

No. Description Position Item

No. Description Position

24493 Bolt 1 27179 Isolated Sheath 17 24525 Magnet Steel 33

24494 Handle Bar 2 27179 Gear 18 24526 Knife 34

24495 Nylon Gasket 3 27179 Block Circle 19 24527 Body 35

24496 Pressing Piece 4 27179 Anchor Sheath 20 24528 Microswitch 36

24497 Input Body 5 24513 Belt Wheel 21 24529 Waved Bolt 37

24498 Anchor Knob 6 24514 Seat of Body 22 24530 Switch 38

24499 Spring 7 24515 Electric Box 23 24531 Strapped Wheel 39

24500 Gasket 8 24516 Bottom Board of Electric Box 24 24532 Belt 40

24501 Pin 9 24517 Bottom Board of Body 25 24533 Motor 41

24502 Anchor Spindle 10 24518 Magnet Steel 26 24534 Gasket 42

24503 Knife Disc 11 24519 Umbrella Bolt 27 24535 Gasket 43

24504 Drain Disc 12 24520 Steel Sheath 28 24536 Bolt 44

27179 Anchor Board 13 24521 Nut 29 24537 Gear Cover 45

27179 Pin 14 24522 Adjusting Bolt 30 24538 Bolt 46

27179 Oil Envelope 15 24523 Plastic Pressing Stick 31 Microswitch 47

27179 Central Spindle 16 24524 Seat of Magnet 32

Electrical Schematics

Model HLC300 19476

Warranty Registration

ThankyouforpurchasinganOmcanproduct.Toregisteryourwarrantyforthisproduct,completetheinformationbelow,tearoffthecardat

theperforationandthensendtotheaddressspeciedbelow.Youcanalsoregisteronlinebyvisiting:

OMCAN INC.

PRODUCTWARRANTYREGISTRATION

3115PepperMillCourt,

Mississauga,Ontario

Canada,L5L4X5

OMCAN

PRODUCTWARRANTYREGISTRATION

1889MarylandAvenue,

NiagaraFalls,NewYork

USA,14305

www.omcan.com/warrantyregistration.html

Thank you for choosing Omcan

Purchaser’sInformation

Name: CompanyName:

Address:

Telephone:

City: ProvinceorState: PostalorZip: EmailAddress:

Country: TypeofCompany:

Restaurant Bakery Deli

DealerfromwhichPurchased: Butcher Supermarket Caterer

DealerCity: DealerProvinceorState: Institution(specify):

Invoice: Other(specify):

ModelName: ModelNumber: SerialNumber:

MachineDescription:

DateofPurchase(MM/DD/YYYY): DateofInstallation(MM/DD/YYYY):



For mailing in Canada For mailing in the US

Over the last 60 years, Omcan has grown to become a leading supplier to the food

service industry in Canada and the USA. Our success over these many years is

directly attributed to our established relationships with all of our valued customers

and through providing them with Diverse, Dependable and Proven products.

Omcan continues to help our customers remain competitive.

With associates in North America, Europe, and Asia, our global footprint continues

to expand as we hold to the principle that clients benet from the accessibility

and familiarity of our sales team. In 2013 as our geography and brand recognition

continued to grow, we changed to one name Omcan Food Machinery.

In over 200,000 sq ft of warehouse space we stock over 2,500 quality food

equipment and supplies for the food preparation market.

Omcan HLC300 User manual

Omcan HLC300 User manual

Related papers

Other documents