Digital Projection E-Vision 6900 User manual

Rev A February 2017

E-Vision 6900 Series

High Brightness Digital Video Projector

4INSTALLATION AND QUICK-START GUIDE

4CONNECTION GUIDE

4OPERATING GUIDE

4REFERENCE GUIDE

118-049A

page i

Digital Projection E-Vision 6900 Series

Rev A February 2017

About This Document

Please follow the instructions in this manual carefully to ensure safe and long-lasting use of the projector.

Keep this manual handy for future reference.

Symbols used in this manual

Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:

ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock unless the instructions are closely

followed.

WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless

the instructions are closely followed.

NOTE: this symbol indicates that there is some important information that you should read.

Product revision

Because we at Digital Projection continually strive to improve our products, we may change specications and designs, and add new features

without prior notice.

Legal notice

Trademarks and trade names mentioned in this document remain the property of their respective owners.

Digital Projection disclaims any proprietary interest in trademarks and trade names other than its own.

Notes

page ii

Digital Projection E-Vision 6900 Series

Rev A February 2017

Introduction

Congratulations on your purchase of this Digital Projection product.

Your projector has the following key features:

• Support for Side by Side, Frame Packing, Frame Sequential and Top Bottom 3D formats.

• HDBaseT® for reception of uncompressed High Denition Video up to 100 m from the source.

• Swappable color wheels for high brightness and color critical applications.

• DynamicBlack™ for improved black levels in dark scenes.

• Independent control of hue, saturation and gain for primary and secondary colors.

• Vertical and horizontal keystone correction.

• Control via LAN and RS232.

• Motorized lens mount.

A serial number is located on the product label. Please record it here:

Notes

page iii

Digital Projection E-Vision 6900 Series

Rev A February 2017

CONTENTS

INSTALLATION AND QUICK-START GUIDE ..............................1

PROJECTOR OVERVIEW ............................................................... 3

Front and rear views ............................................................................. 3

CONNECTING THE POWER SUPPLY ............................................. 4

Voltage selection ................................................................................... 4

REMOTE CONTROL ....................................................................... 5

Infrared reception .................................................................................. 8

CONTROL PANEL .......................................................................... 9

Indicators............................................................................................. 10

CHANGING THE LENS, LAMPS, FILTER AND COLOR WHEEL .... 11

Inserting a new lens ............................................................................ 11

Removing the lens .............................................................................. 11

Changing the lamps ............................................................................ 12

Changing the lter ............................................................................... 13

Changing the color wheel.................................................................... 14

POSITIONING THE SCREEN AND PROJECTOR ........................... 15

OPERATING THE PROJECTOR .................................................... 16

Switching the projector on ................................................................... 16

Selecting an input signal or test pattern .............................................. 16

Input signal ........................................................................................ 16

Test pattern ........................................................................................ 16

Adjusting the lens ................................................................................ 17

Zoom ................................................................................................ 17

Focus ............................................................................................... 17

Shift ................................................................................................. 17

Adjusting the image............................................................................. 17

Orientation ......................................................................................... 17

Aspect ratio ........................................................................................ 17

Picture .............................................................................................. 17

Switching the projector off ................................................................... 18

CONNECTION GUIDE ............................................................................19

SIGNAL INPUTS AND OUTPUTS .................................................. 21

CONTROL CONNECTIONS ........................................................... 22

page iv

Digital Projection E-Vision 6900 Series

Rev A February 2017

OPERATING GUIDE ................................................................................23

USING THE PROJECTOR ............................................................. 25

Main menu .......................................................................................... 25

Lens menu .......................................................................................... 26

Lens Memory ...................................................................................... 27

Image menu ........................................................................................ 28

Image Mode ....................................................................................... 28

Brightness and Contrast ........................................................................ 28

Gamma ............................................................................................. 29

Dynamic Black .................................................................................... 29

Saturation, Hue, Sharpness and Noise Reduction ........................................ 29

Position and Phase .............................................................................. 30

Resync ............................................................................................. 30

Color menu.......................................................................................... 31

Color Space ....................................................................................... 31

Color Temperature ............................................................................... 32

Trim ................................................................................................. 33

Hue / Saturation / Gain .......................................................................... 33

Geometry menu .................................................................................. 35

Aspect Ratio ....................................................................................... 35

Keystone ........................................................................................... 36

Corner Adjustment ............................................................................... 38

Overscan ........................................................................................... 39

3D menu.............................................................................................. 40

The 3D Swap setting explained ............................................................... 40

3D types ............................................................................................ 41

Frame rate multiplication in 3D images ...................................................... 42

Lamps menu ....................................................................................... 43

Setup menu ......................................................................................... 44

Network ............................................................................................ 45

RS232 .............................................................................................. 45

Security ............................................................................................. 46

Filter ................................................................................................. 46

EDID Mode ........................................................................................ 47

Projector ID Control .............................................................................. 47

System ............................................................................................. 48

Information menu ................................................................................ 49

Source information ............................................................................... 49

Factory Reset ..................................................................................... 49

MENU MAP .................................................................................. 50

CONTENTS (continued)

page v

Digital Projection E-Vision 6900 Series

Rev A February 2017

CONTENTS (continued)

REFERENCE GUIDE ................................................................................55

THE DMD™ .................................................................................. 57

SCREEN REQUIREMENTS ........................................................... 59

Fitting the image to the DMD™ ........................................................... 59

WUXGA images displayed full width ......................................................... 59

WUXGA images displayed with a height of 1080 pixels .................................. 60

WUXGA images displayed full height ........................................................ 61

Diagonal screen sizes ......................................................................... 62

Fitting the image to the screen ............................................................ 63

Positioning the screen and projector ................................................... 64

POSITIONING THE IMAGE ........................................................... 65

FRAME RATES AND PULLDOWNS EXPLAINED ........................... 67

Interlaced and progressive scan ......................................................... 67

Frame rates of image sources ............................................................ 67

Pulldowns - conversion into destination formats ................................. 68

2:3 (normal) pulldown ........................................................................... 68

2:3:3:2 (advanced) pulldown ................................................................... 69

APPENDIX A: LENS PART NUMBERS .......................................... 70

APPENDIX B: SUPPORTED SIGNAL INPUT MODES .................... 71

2D formats........................................................................................... 71

3D formats........................................................................................... 73

APPENDIX C: WIRING DETAILS .................................................. 74

RS232 ................................................................................................. 74

Trigger 1 & Trigger 2 ........................................................................... 75

Wired remote control ........................................................................... 75

3D Sync IN / OUT ............................................................................... 75

APPENDIX D: GLOSSARY OF TERMS ......................................... 76

Rev A February 2017

E-Vision 6900 Series

High Brightness Digital Video Projector

INSTALLATION AND QUICK-START GUIDE

4

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

IN THIS GUIDE

Rev A February 2017

IN THIS GUIDE

Projector Overview ............................................................................................. 3

Front and rear views ...................................................................................................3

Connecting The Power Supply ........................................................................ 4

Voltage selection .........................................................................................................4

Remote Control .................................................................................................... 5

Infrared reception ........................................................................................................8

Control Panel ........................................................................................................ 9

Indicators ...................................................................................................................10

Changing The Lens, Lamps, Filter And Color Wheel ............................. 11

Inserting a new lens .................................................................................................. 11

Removing the lens ....................................................................................................11

Changing the lamps ..................................................................................................12

Changing the lter ....................................................................................................13

Changing the color wheel ........................................................................................14

Positioning The Screen And Projector ....................................................... 15

Operating The Projector ................................................................................. 16

Switching the projector on .......................................................................................16

Selecting an input signal or test pattern .................................................................16

Input signal ......................................................................................................................16

Test pattern .....................................................................................................................16

Adjusting the lens .....................................................................................................17

Zoom ...............................................................................................................................17

Focus ..............................................................................................................................17

Shift .................................................................................................................................17

Adjusting the image ..................................................................................................17

Orientation ......................................................................................................................17

Aspect ratio .....................................................................................................................17

Picture .............................................................................................................................17

Switching the projector off .......................................................................................18

page 3

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

PROJECTOR OVERVIEW

Rev A February 2017

Projector Overview

Front and rear views

1 Connection panel

2 Rear infrared window

3 Color wheel door

4 Control panel

5 Power switch and power connection

6 Front infrared window

7 Air inlet

8 Indicators

9 Lens mount

10 Adjustable foot

11 Lamp compartment with air outlets

12 Lamp compartment door

13 Air outlet

14 Air inlet and lter

15 Adjustable feet

Notes

14 15

131211

5 9

12

8

3

76 104

page 4

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

CONNECTING THE POWER SUPPLY

Rev A February 2017

Connecting The Power Supply

Adjust the VOLTAGE SELECT switch 1 to

the required voltage, then rmly push the mains

connector into the socket 2.

Voltage selection

The VOLTAGE SELECT switch must be set to match the power supply you are using:

Voltage of power supply used Position of VOLTAGE SELECT switch

AC 100 - 130 V outlet

AC 200-240 V (single phase) outlet

Notes

Use only the power cable

provided.

Ensure that the power outlet

includes a ground connection as

this equipment MUST be earthed.

Handle the power cable carefully

and avoid sharp bends. Do not

use a damaged power cable.

1

2

page 5

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

REMOTE CONTROL

Rev A February 2017

Remote Control

1 Power ON / OFF

Turns power on and off.

2 Pic Mute ON / OFF

Shows and hides the projected image.

When OFF, the light source is completely switched off and the screen is black.

2 OSD ON / OFF

Enable and disable screen timeout messages and control whether to show the OSD

during projection.

4 MENU

Access the OSD. If the OSD is open, press this button to go back to the previous menu.

5 Navigation (arrows and OK)

Navigate through the menus with the arrows, conrm your choice with OK.

In lens adjustment modes, the arrows are used to move, zoom or focus the lens. See 11

below.

In lens adjustment modes, or when the OSD is not showing, the OK button switches

between modes: Shift Adjustment and Zoom / Focus Adjustment.

6 EXIT

Go up one level in the OSD. When the top level is reached, press to close the OSD.

7 FREEZE

Freeze the current frame.

8 DEFAULT

When editing a parameter, press this button to restore the default value.

9 INFO

Access information about the projector.

10 RE-SYNC

Re-synchronise with the current input signal.

continues on next page...

Pic Mute

OFF ON

MENU

EXIT INFO

HDMI1

OK

OFF ON

ALT

LENS

FOCUS ZOOM

IN

OUT

IN

OUT

SHIFT

21 3

HDMI2 DVI

DISPLAYPORT

HD-T 3GSDI

VGA COMP1 COMP2

BRI

TEST

CON GAMMA

R G B ALL

3D EYE PIP SWAP

456

7 8 9 0

ALT

ADDR

OSD

OFF ON

DEFAULT

FREEZE RE-SYNC

A B C D

USER PRESET

1

2

5

6

8

4

9

7

3

10

Notes

page 6

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

REMOTE CONTROL

Rev A February 2017

11 LENS adjustment

FOCUS IN / OUT: adjust focus.

SHIFT: press and hold this button, then use the Navigation arrow

buttons to move the lens.

ZOOM IN / OUT: adjust zoom.

12 USER PRESET A, B, C, D

This featrure is not supported.

13 ALT

Press and hold this button to access alternative functions for all

buttons with a green label.

14 DVI / GAMMA / numeric input 3

Select the DVI input.

Use with ALT to switch to the next Gamma value:

...1.0, 1.8, 2.0, 2.2, 2.35, 2.5...

15 HDMI 2 / CON / numeric input 2

Select the HDMI 1 input.

Use with ALT to bring up the Contrast control, then adjust the value

with the LEFT and RIGHT arrow buttons.

16 HDMI 1 / BRI / numeric input 1

Select the HDMI 1 input.

Use with ALT to bring up the Brightness control, then adjust the

value with the LEFT and RIGHT arrow buttons.

17 TEST / SWAP / numeric input 0

Show a test pattern. Press again to show the next test pattern:

...Off, White, Black, Red, Green, Blue, CheckerBoard,

CrossHatch, V Burst, H Burst, ColorBar...

The SWAP function is not supported.

continues on next page...

Notes

Remote control

Pic Mute

OFF ON

MENU

EXIT INFO

HDMI1

OK

OFF ON

ALT

LENS

FOCUS ZOOM

IN

OUT

IN

OUT

SHIFT

21 3

HDMI2 DVI

DISPLAYPORT

HD-T 3GSDI

VGA COMP1 COMP2

BRI

TEST

CON GAMMA

R G B ALL

3D EYE PIP SWAP

456

7 8 9 0

ALT

ADDR

OSD

OFF ON

DEFAULT

FREEZE RE-SYNC

A B C D

USER PRESET

13

11

12

14

15

16

17

page 7

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

REMOTE CONTROL

Rev A February 2017

17 DISPLAYPORT / R / numeric input 4

DisplayPort is not supported.

18 HD-T / G / numeric input 5

Select the HDBaseT input.

19 3GSDI / B / numeric input 6

3G-SDI is not supported.

20 VGA / 3D / numeric input 7

Select the VGA input.

Use with ALT to toggle the 3D Format setting between Off and Auto.

21 COMP1 / EYE / numeric input 8

Select the Component 1 input.

Use with ALT to switch between left and right eye 3D dominance.

22 COMP2 / PIP / numeric input 9

Component 2 and PIP are not supported.

23 ADDR / ALL (with red indicator at the top)

Assign and unassign an IR remote address.

To assign an address:

1. Press and hold this button until the indicator starts ashing.

2. Release this button and while the indicator is still ashing, enter

a two-digit address using the numeric input buttons. The indicator

will ash three times quickly to conrm the change.

To unassign an address and return to the default address 00,

• Press and hold ALT and this button simultaneously until the

indicator ashes to conrm the change.

Notes

Remote control bottom

Pic Mute

OFF ON

MENU

EXIT INFO

HDMI1

OK

OFF ON

ALT

LENS

FOCUS ZOOM

IN

OUT

IN

OUT

SHIFT

21 3

HDMI2 DVI

DISPLAYPORT

HD-T 3GSDI

VGA COMP1 COMP2

BRI

TEST

CON GAMMA

R G B ALL

3D EYE PIP SWAP

456

7 8 9 0

ALT

ADDR

OSD

OFF ON

DEFAULT

FREEZE RE-SYNC

A B C D

USER PRESET

23

18

19

17

20

21

22

Pic Mute

OFF ON

MENU

EXIT INFO

HDMI1

OK

OFF ON

ALT

LENS

FOCUS ZOOM

IN

OUT

IN

OUT

SHIFT

21 3

HDMI2 DVI

DISPLAYPORT

HD-T 3GSDI

VGA COMP1 COMP2

BRI

TEST

CON GAMMA

R G B ALL

3D EYE PIP SWAP

456

7 8 9 0

ALT

ADDR

OSD

OFF ON

DEFAULT

FREEZE RE-SYNC

A B C D

USER PRESET

Remote control top

page 8

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

REMOTE CONTROL

Rev A February 2017

Infrared reception

The projector has infrared sensors at the front and back.

The angle of acceptance is 40°. Make sure that the remote control is within the angle of

acceptance when trying to control the projector.

40°

Infrared reception

Notes

page 9

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

CONTROL PANEL

Rev A February 2017

Control Panel

1 POWER

Switches the projector on and off

(STANDBY).

2 INPUT

Switches to the next input source.

3 AUTO SYNC

Re-synchronises with the current input

signal.

4 ASPECT

Changes the aspect ratio.

5 CENTER LENS

Centers the lens.

6 SHUTTER

Shows and hides the projected image.

When OFF, the light source is completely

switched off and the screen is black.

7 MENU

Displays and exits the OSD.

8 Arrow buttons & ENTER

Navigation buttons used to highlight menu

entries in the OSD.

Press ENTER to open or execute the

highlighted menu entry.

9 EXIT

Exits the current OSD page and enters the

level above.

10 LENS SHIFT arrow buttons

Each of these buttons moves the lens in the specied direction.

11 FOCUS plus and minus buttons

Used to move the focus in and out.

12 ZOOM plus and minus buttons

Used to zoom in and out.

POWER

INPUT AUTO

SYNC ASPECT CENTER

LENS SHUTTER

1 2 3 4 5 6

7 8 9 10 11 12

Notes

page 10

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

CONTROL PANEL

Rev A February 2017

Indicators

SHUTTER

Behavior Meaning

Off The shutter is open.

Steady green The shutter is closed.

LAMP 2 / LAMP 1

Behavior Meaning

Off The lamp is switched off.

Flashing green The lamp is preparing to switch on.

Steady green The lamp is switched on.

One red ash, pause No lamp.

Six red ashes, pause The lamp failed to switch on.

Steady red The lamp is end-of-life.

STATUS

Behavior Meaning

Off No error.

One red ash, pause Cover error.

Two red ashes, pause Temperature error.

Three red ashes, pause System error.

Four red ashes, pause Fan error.

POWER

Behavior Meaning

Off The projector is switched off.

Flashing green The projector is warming up.

Steady green The projector is switched on.

Flashing amber The projector is cooling down.

One amber ash, pause Keypad Lock warning.

Steady amber The projector is in Network STANDBY mode (<3W).

Steady red The projector is in Eco STANDBY mode (<0.5W).

Notes

STAT U SLAMP 1LAMP 2SHUTTER POWER

page 11

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

CHANGING THE LENS, LAMPS, FILTER AND COLOR WHEEL

Rev A February 2017

Changing The Lens, Lamps, Filter And Color Wheel

Inserting a new lens

1. Remove the front and rear lens caps.

2. Position the lens so that the labels are at the top, and gently insert it

all the way into the lens mount.

3. Push the lens in rmly and turn it clockwise until it clicks into place.

Removing the lens

1. Push in the lens release lever, and turn the lens anti-clockwise.

2. Remove the lens..

Notes

Always allow the lamp to cool for

5 minutes before:

- disconnecting the power

- moving the projector

Before changing the lens,

always make sure the projector

is switched off and fully

disconnected from its power

supply.

When changing the lens, avoid

using excessive force as this may

damage the equipment.

The lens is shipped separately.

Take care to preserve the original

lens packaging and protective caps

for future use.

page 12

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

CHANGING THE LENS, LAMPS, FILTER AND COLOR WHEEL

Rev A February 2017

Changing the lamps

1. Unscrew the captive screw holding the lamp compartment

door.

2. Remove the door to reveal the lamp modules.

3. Unscrew the three captive screws holding each lamp

module in its place.

4. Pull out the old lamp modules and insert the new ones.

5. Use the three captive screws on each module to hold it into

position, then replace the lamp compartment cover and

secure it with the screw.

Notes

Always allow the lamp to cool for

5 minutes before:

- disconnecting the power

- moving the projector

The lamp must be changed only

by suitably qualied personnel.

The projector will shut down if the

cover is opened whilst in operation.

 Theltersshouldbechangedatthe

same time as the lamp is changed.

page 13

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

CHANGING THE LENS, LAMPS, FILTER AND COLOR WHEEL

Rev A February 2017

Changing the lter

1. Loosen the captive screw at the bottom of the

lter door.

2. Remove the door and the lter as shown in the

illustration.

3. Replace the lter, then close the door and

tighten the screw to secure it in place.

Notes

Always allow the lamp to cool for

5 minutes before:

- disconnecting the power

- moving the projector

The lamp must be changed only

by suitably qualied personnel.

The projector will shut down if the

cover is opened whilst in operation.

 Theltersshouldbechangedatthe

same time as the lamp is changed.

page 14

Digital Projection E-Vision 6900 Series

Installation and Quick-Start Guide

CHANGING THE LENS, LAMPS, FILTER AND COLOR WHEEL

Rev A February 2017

Changing the color wheel

1. Slide open the lamp compartment cover as shown in the

picture.

2. Unscrew the two captive screws securing the color wheel.

3. Lift and pull the color wheel handle to remove the color

wheel.

4. Insert a new color wheel, lower the handle, fasten the

screws and replace the lamp compartment cover.

Notes

Always allow the lamp to cool for

5 minutes before:

- disconnecting the power

- moving the projector

The color wheel must be changed

only by suitably qualied

personnel.

The projector will shut down if the

cover is opened whilst in operation.

Page is loading ...

Digital Projection E-Vision 6900 User manual

This manual is also suitable for

Digital Projection E-Vision 6900 User manual

Related papers

Other documents