ICP LP-8821 Quick Start

Type
Quick Start

This manual is also suitable for

Copyright©2017ICPDASCo.,Ltd.AllRightsReserved.Email:ser[email protected]om 1
Q
Q
u
u
i
i
c
c
k
k
S
S
t
t
a
a
r
r
t
t
f
f
o
o
r
r
L
L
P
P
-
-
8
8
x
x
2
2
1
1
English / Mar 2017/ Ver 1.1
1 Shipping Package
This shipping package contains the following items:
1xLP8121/8421/88211xmicroSDcard1xSoftwareCD
1xmicroSD/SDadapter
1xScrewDriver2.4mm 1xQuickStart(ThisDocument)
2 Preparations for Devices
; Powersupply+10~+30V
DC
.Forexample:DP665(optional)
DP665Î
http://www.icpdas.com/products/Accessories/power_supply/dp665.htm
; EthernetHub.Forexample:NS205(optional)
NS205Î
http://www.icpdas.com/products/Switch/industrial/ns205.htm
; MakesureyourPChasworkableserialportandnetworksettings.
3 Hardware Introduction
Copyright©2017ICPDASCo.,Ltd.AllRightsReserved.Email:ser[email protected]om 2
LP8421/LP8821
LP8121
RotarySwitch
MicroSDSocket
VGA
1Slot
USB
TerminalBlock
Ethernet
PowerIndicator
PowerIndicator
RotarySwitch
ttyS1:COM3(RS23
2
/RS485)
ttyO5:Console
MicroSDSocket
DIPSwitch
ttyS34:COM36
(RS232)
Ethernet
USB
LP8421:I/OSlotx4
LP8821: I/OSlotx8
VGA
(
RS232
)
TerminalBlock
4 Console/Ethernet Connection
1. ConnectboththeLP8x21and your computerthroughthe“Console”or“LAN
1/2 .Usercanchoose the terminal softwar e(e.g., Puttyorothers)to connect
theLP8x21.
2. If user chose the COM1 (“Console”), user can set the baud rate “115200” to
connectthedevice.
Fig41:ConsoleConnection
3.IfuserusedtheLAN1/2 , usercanrefertobelowdefaultnetworkconfiguration,
thenusingtheterminalsoftware(e.g.,Puttyorothers)toconnecttheLP8x21.
IP 192.168.0.1
LAN1
Netmask 255.255.255.0
IP 192.168.0.2
LAN2
Netmask 255.255.255.0
Fig42:SSHConnection
4. After user connect to the LP8x21, user can input default ID “root” and
passwordicpdas”tologin.
5. Formoredetailedinformation,pleaserefertoLP8x21Document:
http://ftp.icpdas.com/pub/cd/linpac/napdos/lp8x2x/user_manual/
Copyright©2017ICPDASCo.,Ltd.AllRightsReserved.Email:ser[email protected]om 3
5 Network Configuration
1. After user follow Chapter 4 “Console/Ethernet Connection” to connect to the
devicebashterminal,usercanchangethedefaultnetworksetting.
2. If user wants to change the network configuration, user can use the Linux
command“vitomodifytheconfigurationfile“/etc/network/interfaces”.
3.Usingthe‘#’tomarkthedefaultconfiguration.PleaserefertotheFig51:
Fig51:networkconfiguration
4. After user save the file and reboot device, user can use the new network
configurationtoconnecttotheLP8x21.
6 Application Support
1. WebServer
Thewebserverdaemon“apache2hasbeenbuiltintheLP8x21anditwillbe
startedautomaticallyatboottime.
2. SoftwarePackageManager
The “aptget utility is a package manager used to download and install
packagesfromlocalpackagerepositoriesoroneslocatedintheInternet.
3. XFCEGUIDesktop
LP8x21providestheXFCEpackage,afterusertype“roottologinLP8x21,the
localterminalwouldex ecutetheXFCEDe sktop.
Copyright©2017ICPDASCo.,Ltd.AllRightsReserved.Email:ser[email protected]om 4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

ICP LP-8821 Quick Start

Type
Quick Start
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI