V
Specifications ColorPASS 8000:
Hardware Fiery XJ+ Motherboard • MIPS R5000 200MHz CPU • 512MB RAM SDRAM • 512 K Secondary cache
• 4GB hard disk
Networking Auto sensing ports: AUI • RJ45 • Parallel • Auto Switching Protocols • AppleTalk®• TCP/IP • Novell IPX
• Support for 10/100Base-T standard • Optional support for Token Ring
Document Set Printing (Fiery DocBuilder™Technology) Continuous Print™• Document RIP-While-Print®
• Electronic collation • Reverse order printing • Auto duplexing support • Sorting/stapling support
Command Workstation Fiery Spooler™• Job Log • Fast reprint • Error-Free printing • Document preview, Merging
and Editing
WebTools Fiery WebStatus™• Fiery WebSpooler™• Fiery WebInstaller™(for downloading printer drivers and Utilities)
• Fiery WebLink™
Page Description Adobe Postscript®Level 2
Utilities Fiery Downloader™• Fiery Scan™• Fiery Print Calibrator™• Fiery Print™drivers for Macintosh and Windows
Canon reserves the right to change specifications without notice.
™All company and/or product names are trademarks and/or registered trademarks of their respective manufacturers in their markets and/or countries.
Specifications ColorPASS V80:
Hardware Fiery VX Motherboard • DEC Alpha @ 533MHz CPU • 512MB RAM SDRAM • 1.5 MB Cache memory
• High-speed, 128-bit bus • 4GB hard disk • CD-ROM drive • Zip-drive
Document Set Printing (Fiery DocBuilder™Technology) Continuous Print™• Document RIP-While-Print®• Electronic
collation • Reverse order printing • Fast reprint • Error-free printing • Document preview, merging and editing
• Auto duplexing support • Sorting/stapling support • Archiving via Command WorkStation • Load Balancing via
Command WorkStation • Fiery Free Form™- variable data solution
Page Description Adobe Postscript®3
Color Management PANTONE®spot color matching • Automatic black overprinting • Trapping and overprinting
• Combine separations mode • Built-in Color Rendering Dictionaries (CRD’s) • CMYK and PANTONE color reference pages
• RGB color palettes form Microsoft Word™and PowerPoint™• Apple Monitor and EFI™RGB profiles • Support for
ICC/ICM color profiles
Press Simulation Quick Simulation - adjusts toner density • Full Simulation - adjusts toner density and hue • Support for
SWOP, Euroscale, DIC printing standards • Support for custom simulation targets • Simulation on a per-job basis
Calibration Default calibration for great out-of-the-box color • Fiery Print Calibrator™• AutoCal 2 • Calibration on a per-
job-basis
Mode and features:
• Two-sided mode • One Touch Color • Color Balance • Zoom Functions
• Frame Erase mode • Two-page Separation mode
• Shift mode • Color Creation mode • Image Creation mode
• Marker Editing • Area Designation mode • Composition mode
• Cover mode • Transparency Interleaving mode
Options:
• RDF-E1 • Stapler Sorter F1 • Buffer Pass Unit • 2,000 sheet paper deck (A3)
• Film Projector B1 • Editor F1 and ED board • Film Scanner III • Monitor
Controller Board • ColorPASS Z90, ColorPASS 8000 or ColorPASS V80
Mode and features:
• Two-sided mode • One Touch Color • Color Balance • Zoom Functions
• Frame Erase mode • Two-page Separation mode
• Shift mode • Color Creation mode • Image Creation mode
• Marker Editing • Area Designation mode • Composition mode
• Cover mode • Transparency Interleaving mode
Options:
• RDF-E1 • Stapler Sorter F1 • Buffer Pass Unit • 2,000 sheet paper deck (A3)
• Film Projector B1 • Editor F1 and ED board • Film Scanner III • Monitor
Controller Board • ColorPASS Z90, ColorPASS V80 or ColorPASS 8000
Specifications CLC 1000
Name:
Copying colour:
Copying method:
Developing method:
Fixing system:
Resolution:
Gradation:
Zoom ratio:
Production ratio:
Reduction copying:
Enlargement copying:
Copy speed:
First Copy Time:
Warm-up time:
Multiple copy runs:
Paper feeding:
Duplex Tray capacity:
Copy size:
Non-image areas (mm):
Copy paper:
Power requirement:
Power consumption:
Dimensions (W x D x H):
Weight:
Canon Colour Laser Copier 1000
full colour, mono colour and black
Dry Electrostatic Transfer
two-component toner projection develop-
ment (yellow, magenta, cyan and black)
heated rollers
400 dpi
256 tones
25 - 400%
direct copying 1:1
1:0.250; 1:0.500; 1:0.707
1:1.414; 1:2.000; 1:4.000
A4: 31 cpm; A3: 12 cpm
15 sec.
approx. 8 min.
1 - 999
2 cassettes of 500 sheets each, 4,000 sheet
paper deck, 250 sheets by multifeeder
50 sheets (A5 - A3)
A5 - A3+ (max. printable area
297 x 432 mm +/- 0,5%)
leading edge: 2.5 +/- 1.5 mm
trailing edge: 2.5 +/- 1.5 mm
left and right sides: 2.0 +/- 1.0 mm
80 - 209 g/m2
240 V, 50/60 Hz
2.6 kW
1640 x 730 x 1000 mm
487 kg
Specifications CLC 1000S
Name:
Copying colour:
Copying method:
Developing method:
Fixing system:
Resolution:
Gradation:
Zoom ratio:
Production ratio:
Reduction copying:
Enlargement copying:
Copy speed:
First Copy Time:
Warm-up time:
Multiple copy runs:
Paper feeding:
Duplex Tray capacity:
Copy size:
Non-image areas (mm):
Copy paper:
Power requirement:
Power consumption:
Dimensions (W x D x H):
Weight:
Canon Colour Laser Copier 1000S
full colour, mono colour and black
Dry Electrostatic Transfer
two-component toner projection develop-
ment (yellow, magenta, cyan and black)
heated rollers
400 dpi
256 tones
25 - 400%
direct copying 1:1
1:0.250; 1:0.500; 1:0.707
1:1.414; 1:2.000; 1:4.000
A4: 24 cpm; A3: 12 cpm
16 sec.
approx. 8 min.
1 - 999
2 cassettes of 500 sheets each, 4,000 sheet
paper deck, 250 sheets by multifeeder
50 sheets (A5 - A3)
A5 - A3+ (max. printable area
297 x 432 mm +/- 0,5%))
leading edge: 2.5 +/-1.5 mm
trailing edge: 2.5 +/- 1.5 mm
left and right sides: 2.0 +/- 1.0 mm
80 - 209 g/m2
240 V, 50/60 Hz
2.6 kW
1640 x 730 x 1000 mm
487 kg