Nissan Sentra User guide

Brand: Nissan

Model: Sentra

Type: User guide

2019

NISSAN TOWING GUIDE

Table of Contents

Introduction ____________________________________________________ 1

Towing Equipment

_______________________________________________ 2

What Is Right for You

_____________________________________________ 3

Preparing Your Vehicle

____________________________________________ 10

Towing Safety

__________________________________________________ 15

Towing Tips

___________________________________________________ 18

Towing Glossary

________________________________________________ 22

Protection

____________________________________________________ 25

Commitment

__________________________________________________ 26

The 2019 NISSAN Towing Guide provides information for currently available

2019 NISSAN vehicles. This publication will be amended as new vehicles are introduced.

For important safety warnings, please read and follow your vehicle owner’s manual.

2019 NISSAN Towing Guide

INTRODUCTION

SAFETY IS PRIORITY ONE

Obviously, your first concern should be safety. Your vehicle was designed to be used

primarily to carry passengers and cargo. Always remember that towing a trailer places

additional loads on your vehicle’s engine, drivetrain, suspension, and steering, braking,

and other systems. Therefore, be certain that your vehicle can meet the demands of the

towing application you have in mind.

Rent or purchase towing equipment that complies with established industry standards

and state and federal safety regulations. Reinforced tow hitches designed especially for

certain NISSAN vehicles are available from your NISSAN dealer. Hitches for other NISSAN

models – if Nissan recommends towing with that vehicle - should be bought from and

installed by a professional supplier of towing equipment. Carefully review all information

and literature provided with any hitch you purchase for safety and proper use

information.

Finally, it is important to follow the towing capacity limit set for your specific vehicle,

and to ensure that your vehicle is in top mechanical condition, especially the tires, brakes,

suspension, and engine cooling system. See your vehicle owner’s manual for details.

WHAT IS THE ESTABLISHED TOWING CAPACITY FOR YOUR VEHICLE

Towing capacities vary from vehicle to vehicle. See the towing information in your

vehicle owner’s manual to confirm whether your NISSAN vehicle can be used to tow and if

so, what its towing capacity rating is. Use this data to help select the proper NISSAN

vehicle to meet your anticipated towing needs, and refer to it when renting a trailer or

other piece of towing equipment.

EQUIP YOUR NISSAN FOR TOWING

The frequency and type of towing dictate the manner in which you equip your vehicle.

If you plan to tow often, for either recreation or work, select the engine size, transmission

type, suspension, and towing capacity that are best suited to your requirements. This

guide can help you select that equipment.

If, on the other hand, your towing will be infrequent, choose the NISSAN vehicle and

equipment that best meets your day-to-day needs. Be careful not to exceed the towing

capacity on those few occasions when you do tow.

READ THIS GUIDE BEFORE YOU TOW

This guide was designed to provide an overview of safe towing practices. Here, you will

find information on towing equipment, safety, proper loading and driving techniques,

towing tips, and much more.

2019 NISSAN Towing Guide

It is also a good idea to discuss your towing requirements with either your NISSAN dealer

or a professional supplier of towing equipment before you equip your NISSAN vehicle for

towing. Finally, there are state and local laws on towing that you should review to ensure

compliance with all regulations.

CAUTION- Do not use your new vehicle to tow a trailer or haul a heavy load for

the first 500 miles (800 km) of use. Your engine, axle or other parts could be

damaged. For the first 500 miles that you tow a trailer, do not drive over 50 mph and do

not make starts at full throttle. This helps your engine and other parts of your vehicle

wear in at heavier loads.

TOWING

EQUIPMENT

RENTING

The first thing to keep in mind when renting any type of tow equipment, trailer, or tow

dolly, is to rent only from professional companies that specialize in towing and towing

equipment. More than likely, specialized companies hire professional staff that can assist

you in selecting and installing the proper towing equipment for your NISSAN vehicle.

When renting, make sure you have your vehicle owner’s manual on hand so that you

can reference the towing capacities for your specific vehicle. Make certain that the tow

equipment and components you rent does not exceed your vehicles maximum towing

capacity. Make sure that any related towing equipment you rent has the proper weight

class rating for your maximum intended towed load weight; do not exceed the maximum

Gross Combined Weight Rating.

While you are there, ask questions. How much does the empty trailer weigh? How

much weight will the trailer hold? What is the trailer’s tongue load? What type of brakes is

it equipped with (if any)? All of these factors have an effect on whether your NISSAN

vehicle is capable of safely pulling that type of trailer, dolly, or tow equipment.

Make certain that the trailer stoplights, taillights, turn signals, and brakes (if equipped)

are connected and operating correctly, and all safety equipment is properly installed.

Check the safety chains/cables, tie-downs, etc.

For safer operation, carefully inspect the condition of the trailer and towing equipment.

Specifically, check to make sure the tires are not worn excessively and are properly

inflated. Make sure there are not any broken welds, missing bolts, and that the hitch

components are not damaged. Towing safety should be a high priority when choosing

and renting towing equipment, including hitches.

WARNING: NEVER RENT A CLAMP-ON-TYPE HITCH. The hitch should not be

attached to or affect the operation of the impact-absorbing bumper. Use only a

permanent-type hitch properly attached to the vehicle to help avoid personal injury or

property damage

2019 NISSAN Towing Guide

PURCHASING

If you are buying a travel or boat trailer, be sure that your NISSAN vehicle has the towing

capacity to pull it. Refer to your vehicle owner’s manual for detailed information regarding

the towing capacity of your specific vehicle. Your vehicle owner’s manual should ALWAYS

be referenced before making any towing decisions.

Naturally, you will want to select the towing and safety equipment that adheres to your

states and federal safety regulations. Moreover, if you plan to tow often, consider

convenience. Quick-disconnect trailer light connectors and ratchet-type tie-downs, for

example, make the job go faster and easier and are usually worth the extra small

investment. Purchase towing items such as hitches and hitch balls only from your NISSAN

dealer or a professional supplier of towing equipment.

If you are intending to use your vehicle to tow a trailer you already own, you must

ensure that your loaded trailer remains well within your vehicle's towing capacity as

specified in the vehicle owner's manual. In addition, you should purchase the right type

style, and class* of hitch and towing equipment to properly adapt the trailer to your

vehicle.

WHAT IS

RIGHT FOR YOU

TYPES OF EQUIPMENT

Towing requires a variety of equipment, and, depending upon the application, there can

be several types or styles of each piece of equipment. Working with your NISSAN dealer or

a professional supplier of towing equipment, it should be relatively simple to determine

the proper type of equipment for your specific vehicle given the intended application. This

section explains the most common pieces of towing equipment available.

HITCHES

Whichever type of hitch you use, it should be firmly bolted to your vehicle, and should be

of the appropriate weight class for the trailer, tow dollies, or towing equipment you intend

to tow. In addition, keep the following in mind:

WARNING - Never modify the vehicle’s brake or exhaust systems or its body

structure/frame when installing the hitch. Modifying the exhaust system structure on a

vehicle could result in improper vehicle operation not covered by the vehicle’s warranty. It

may also lead to carbon monoxide leaking into the passenger compartment. Altering the

brake system can adversely affect vehicle handling, braking and performance and could

increase the likelihood of an accident or personal injury or death.

* Refer to your owner’s manual for the equipment class information specific to your

vehicle.

2019 NISSAN Towing Guide

● Installing an aftermarket hitch may affect the rear crash performance of your vehicle.

Changing the crash performance of a vehicle could lead to more severe vehicle damage,

personal injury or death in a crash. Be sure that the hitch does not interfere in any way

with the vehicle’s impact-absorbing bumper.

● Never attach a hitch or towing device to the vehicle bumper. This may affect the

operation of the impact-absorbing bumper. Use only a permanent-type hitch

properly attached to the vehicle to help avoid personal injury or property damage.

● Regularly check to see that all hitch-mounting bolts are securely fastened to ensure

the hitch will not come loose, and remains properly attached to the vehicle to help

avoid property damage, personal injury or death.

CAUTION - For receiver-type hitches using a ball mount, remove the ball mount should

when not towing, or protect it with a special cover, this will help protect it from damage,

and prevent rust from forming on it.

● If you install a hitch yourself, remember that it must be securely attached to the frame

or underbody, according to the manufacturer’s instructions. Never attach a hitch or

towing device to the vehicle axle housing. This may damage the housing, wheel

bearings, wheels, or tires.

Hitch Types

Bumper Hitch – This is a special reinforced

bumper designed to accommodate a

standard trailer hitch ball. The light-duty

bumper hitch must support the trailer

tongue weight all by itself. The maximum

towing capacity when using the Genuine

Nissan step bumper, as a ball mount hitch is

limited to 3,500 lbs. and 350 lbs. tongue

load. A Class I trailer hitch is limited to

2,000 lbs. Choose a proper class ball mount

based on the trailer weight.

Receiver Hitch – A receiver hitch is bolted

directly to the vehicle structure for added

strength and durability. NISSAN bolt-on

receiver hitches are designed for use with

NISSAN vehicles, and include the

necessary reinforcements, with ample

clearance around bumpers, and frame

members, etc. These hitches allow for the

removal of the ball mount when not

towing.

2019 NISSAN Towing Guide

Weight-Distributing Hitch System

– This type of system uses a “load-

leveling” or “equalizing” hitch. The

weight-distributing feature helps shift

trailer tongue weight to all axles of

the tow vehicle and all trailer tires.

For Armada, Frontier, Pathfinder,

Titan, and Nissan NV vehicles, a

weight-distributing hitch ball mount (Class IV) is recommended if you plan to tow

trailers with a maximum weight over 5,000 lbs. This ball mount includes a 2-5/16”

hitch ball and is available through your NISSAN dealer.

NOTE – A weight-distributing hitch system may affect the operation of trailer

surge brakes. If you are considering use of a weight-distributing hitch system

with a surge brake-equipped trailer, check with the surge brake, hitch, or trailer

manufacturer to determine if and how this can be done. Follow the instructions

provided by the equipment manufacturer for installing and using the weight-

distributing hitch system.

Clamp-On Bumper Hitch – This

temporary hitch clamps onto the

bumper assembly.

WARNING-DO NOT USE a clamp-on

bumper hitch on any NISSAN vehicle

because using it may result in the trailer

separating from the towing vehicle. If

the trailer separates from the vehicle, it

could cause a crash, resulting in

property damage and personal injury,

or death. Use of this type of hitch can

also damage the towing vehicle.

2019 NISSAN Towing Guide

5th Wheel or Gooseneck Hitch –

A 5th wheel or gooseneck hitch

mounts in the bed of a pick-up and is

designed for heavy-duty applications.

A gooseneck hitch is available from

NISSAN for the Titan XD. At this time,

the Titan XD is the only NISSAN vehicle

approved for 5th wheel and

gooseneck trailer towing

BALL MOUNT

A ball mount (also known as a

drawbar) is a bar that holds a hitch ball,

which inserts into a receiver-type hitch.

Ball mounts come in a number of weight

capacities (3,500 lbs., 5,000 lbs., etc.) and

sizes (1-1/4”, 2”, 2 1/2”, etc.), and can be

weight distributing or non-weight-

distributing. Choose a proper class ball

mount based on the trailer weight.

HITCH BALL

A hitch ball is bolted through a ball mount

or hitch hole in the tow vehicle’s rear bumper. The coupler on the trailer tongue

attaches over the hitch ball. Like ball mounts, hitch balls are available in a number

of weight capacities and sizes. Most hitch balls have the size stamped on the top

of the ball. The required hitch ball size is stamped on most trailer couplers.

Always make sure the hitch ball selected has the proper shank diameter and

weight rating for the ball mount as well as the coupler on your trailer. Using a

7/8” hitch ball in a 2” coupler, for example, could result in the trailer separating

from the tow vehicle. The diameter of the hitch ball shank must be matched to

the ball mount hole diameter. The shank should be no more than 1/16” smaller

than the hole.

Gooseneck Hitch

Hitch

Mount

Ball

2019 NISSAN Towing Guide

To keep the hitch ball in top condition, a simple maintenance routine is

recommended. Coating it with light grease will minimize wear of both the coupler and

hitch ball. In addition, removing the hitch ball when not towing, or protecting it with a

special cover will help prevent rust from forming on it.

TRAILER TONGUE

The tongue is the part of the trailer that extends forward to meet the tow vehicle, and

it carries the coupler assembly. Knowledge of the trailer minimum and maximum

tongue load (conventional trailers) and king pin load (5th wheel and gooseneck

trailers) is critical as it can have a significant effect on the handling and capacity of

the tow vehicle. Refer to your vehicle owner’s manual to view the maximum

conventional trailer tongue load listed for your vehicle. Trailer tongue weight is the

amount of downward pressure exerted onto the hitch ball. Keep the tongue load

between 10-15% of the total trailer weight. DO NOT exceed the maximum tongue

load specification. If the tongue weight is below the recommended amount, you

must move some of the load forward or add weight to the front frame of the trailer.

SAFETY CHAINS/CABLES

Always use suitable safety chains/cables

between the tow vehicle and the trailer. If

the hitch should break or become

disengaged while towing, these

chains/cables will help provide an

emergency connection between the

vehicle and the trailer.

When installed properly the chains/cables

should be crossed under the trailer

tongue, and attached to the hitch or

vehicle frame. Crossing the chains/cables

under the tongue will help prevent the

tongue from hitting the ground should

the trailer become disconnected. Be sure

to leave enough slack in the

chains/cables to turn corners without

binding; however, note that excessive

slack will allow the chains/cables to drag

on the ground.

WARNING- DO NOT use S-hooks for attaching the safety chains as they may

become un-hooked while towing. If the S-hook unhooks, the emergency

chains/cables will become detached, so if the tow hitch breaks or becomes

disengaged, it will allow the trailer to completely break away causing property

damage and possibly personal injury or death.

The use of S-hooks is illegal in

many states.

Not OK

2019 NISSAN Towing Guide

CAUTION- To avoid damage to the bumper and chains/cables when making a sharp

turn, do not attach the chains/cables too close to the coupler. Consult your trailer

manufacturer for the proper location of the chain/cable attachment to the trailer.

REAR VIEW MIRRORS

WARNING- In many cases, a trailer can block your rear vision when you are using only

the standard NISSAN rear view and outside mirrors. Be careful when changing lanes or

turning. Using only these mirrors could cause an accident as they were not designed for

towing.

Trailer tow mirrors specifically designed for trailer towing can be adjusted for better

visibility when your rearward vision is obstructed while towing a trailer. Trailer Tow

Mirrors are available as an accessory for certain Nissan vehicles. Before using these

mirrors, make certain that they comply with state and local regulations. It is

recommended you contact your NISSAN dealer for details.

BREAKAWAY SWITCH

On a trailer with electric brakes, a breakaway switch can automatically activate the

trailer brake system if the trailer becomes separated from the tow vehicle. Should the

trailer become detached, a breakaway switch may help prevent the trailer from

wandering into another lane.

WARNING - A breakaway switch relies on the power of a trailer battery, so make sure

to maintain the battery’s charge. Never use the breakaway switch to “park” the trailer on

a grade. The battery would eventually discharge and release the brake, allowing the trailer

to roll, which may cause property damage, serious injury or death. Be sure to leave

enough slack in the tether on the breakaway switch to turn corners without binding. If

you do not, the electric trailer brakes will lock-up and not release. See your trailer

manufacturer for proper installation of a breakaway switch that is compatible with your

trailer braking system.

TRAILER LIGHTS

Trailer lights should comply with all applicable federal, state, and local regulations,

and should be in proper working order at all times. A trailer’s taillights, stoplights, and

turn signal lights must be wired into the tow vehicle’s electrical system.*/**

Most trailers operate on a four-wire system in which the stoplights and turn signal

lights utilize the same wire. Most all NISSAN vehicles have separate wires for the

stoplights and turn signal lights, therefore a device called a “converter” is needed.***

Specifically, a “powered converter” must be used to provide power for all trailer

* Vehicles equipped with LED taillights require that wiring be connected at a specific location. For

assistance in hooking up trailer lights, contact your NISSAN dealer or a professional supplier of

towing equipment.

** Vehicles not equipped with the factory tow package need a trailer tow harness and relays

installed in the passenger kick panel and the trailer plug installed at the hitch.

*** If the vehicle is factory equipped with a trailer wiring connector, then no convertor is necessary.

If your trailer is equipped with a 4-pin connector, an adapter will be needed to connect the trailer

lights to the vehicle. Vehicles equipped with the optional trailer tow package can be equipped with

a 7-pin trailer harness connector.

2019 NISSAN Towing Guide

This type of converter creates only minimal additional electrical demand (draw) on

the vehicle lighting circuits, which provides protection for the vehicle’s sensitive

electronics. Always check for correct operation of the taillights, stoplights, and turn

signal lights every time you connect a trailer for towing. Never replace vehicle fuses

with fuses of a higher amperage rating than the original.

CAUTION – Improperly installed or poor quality trailer harness wiring may

adversely affect your vehicle’s electrical system. Use only a NISSAN approved

wiring harness, or equivalent, and consult your dealer or a professional supplier of

towing equipment to obtain the proper equipment and to have it installed.

BRAKES

As with hitches, several types of braking systems are available. Most states

require a separate braking system on trailers with a loaded weight above a

specific amount, therefore you should check to ensure you comply with all

regulations and laws. Have a professional supplier of towing equipment

demonstrate proper brake function testing.

Never connect a trailer brake system directly to the vehicle brake system.

Most states require a separate braking system on trailers with a loaded

weight of 1,500 lbs. (680 kg) or more.

Surge Brakes – The surge brake actuator is mounted on the trailer tongue with

a hydraulic line running to each trailer wheel equipped with disc brakes. Surge

brakes are activated by the trailer pushing against the hitch ball when the tow

vehicle is braking. Hydraulic surge brakes are common on rental trailers and some

boat trailers. In this type of system, there is no hydraulic or electric connection for

brake operation between the tow vehicle and the trailer.

Electric Trailer Brakes – Electric braking systems are activated by an electronic

signal sent from a trailer brake controller (special brake-sensing module). If

electric trailer brakes are used and the vehicle is not equipped with an integrated

trailer brake controller, NISSAN recommends the installation of an aftermarket

trailer brake controller. For adjustment specifications, refer to the manufacturer’s

instructions of the brake controller being installed. For your convenience,

Armada, Frontier, Pathfinder, Titan, and NV vehicles are pre-wired to

accommodate most popular electric trailer brake controllers. A wiring harness* is

either included with your vehicle or available from your NISSAN dealer. This

harness provides electric trailer brake controller input and output connections to

the vehicle wiring. See a professional supplier of towing equipment for electric

trailer brake controller availability.

Contact a NISSAN dealer or a professional supplier of towing equipment for information on trailers

equipped with electric brakes and for Genuine NISSAN jumper harness availability for your specific

vehicle.

2019 NISSAN Towing Guide

CAUTION - The NISSAN trailer brake controller has been verified to be

compatible with trailers having electric actuated drum brakes (one to four axles)

and electric- over-hydraulic brakes. It will not activate hydraulic surge-style trailer

drum brakes.

SWAY CONTROL DEVICE

Sudden maneuvers, wind gusts, and buffeting caused by other vehicles can affect

trailer handling. Sway control devices may be used to help control these effects. If

you choose to use one, contact a reputable trailer hitch supplier to make sure the

sway control device will work with the vehicle, hitch, trailer and the trailer’s brake

system. Trailer sway control is a function of vehicles equipped with the Vehicle

Dynamic Control (VDC) system and is active when the VDC function is enabled

GENUINE NISSAN PARTS AND ACCESSORIES

Whether you will be towing occasionally or on a regular basis, NISSAN offers a full

range of Genuine NISSAN Parts and Accessories to help you tow with confidence.

Every Genuine NISSAN Parts and Accessory is thoroughly tested and inspected for

fit and workmanship. Therefore, you can be certain that every item is designed to

be compatible with the standard features of your vehicle and designed to assist

you with your towing needs. It is recommended you contact your NISSAN dealer

for more information on accessories or towing-related parts for your NISSAN

vehicle.

PREPARING

YOUR VEHICLE

BREAK-IN AND MAINTENANCE SCHEDULE

CAUTION - NISSAN recommends that you allow a sufficient “break-in” (500

miles) of both the engine and drivetrain before towing with your new NISSAN

vehicle. Do not tow a trailer or haul a heavy load for the first 500 miles. For the

first 500 miles that you tow a trailer, do not drive over 50 mph and do not make

starts at full throttle. This helps the engine and other parts of your vehicle wear in

at heavier loads.

Keep in mind, too, that towing places higher demands and added loads on vehicle

components, so more frequent maintenance is called for. Your NISSAN Service &

Maintenance Guide provides the accelerated maintenance schedule for towing

purposes. Engine oil, filter, transmission fluid, and possibly other fluids should be

changed more frequently when towing.

2019 NISSAN Towing Guide

MEASURING VEHICLE WEIGHT

The key to safer, efficient towing has to do with weight. Your vehicle — SUV,

crossover, or truck — is capable of carrying and towing only a certain amount of

weight. You must compare your vehicle’s tow weight ratings with the combined

weight of the vehicle, trailer, and their contents. This will help ensure that the total

weight does not exceed any of your vehicle’s tow weight ratings.

There are four weights to consider when towing:

 Gross Vehicle Weight

 Gross Axle Weight (Front or Rear)

 Gross Combined Weight

 Trailer Tongue/King Pin Load

These ratings are based upon normal highway driving and may be reduced if

operating in reduced-traction situations, (for example, slippery boat ramps).

WARNING – Attempting to tow loads greater than the GVWR, GAWR, GCWR,

overloading and/or improperly loading the trailer tongue/king pin load specified

could adversely affect vehicle handling, braking, and performance. This may

result in unsafe vehicle handling and longer braking distance, which could result

in a serious accident and personal injury. Failures to your vehicle caused by

overloading are not covered by your vehicle’s warranty.

GROSS VEHICLE WEIGHT (GVW)

The Gross Vehicle Weight (GVW) is the actual weight as weighed on a scale -

including passengers, cargo, fuel, hitch, trailer tongue/king pin load, and any

optional equipment.

The best way to determine the GVW is by having the vehicle — loaded and ready

to tow — weighed at a public scale. That figure must include the combined weight

of all passengers and cargo that are normally in the vehicle when towing a trailer.

The GVW you come up with must not exceed the Gross Vehicle Weight Rating

(GVWR) for your vehicle.

2019 NISSAN Towing Guide

On all NISSAN vehicles, the GVWR is shown on

the Federal Motor Vehicle Safety Standard

(F.M.V.S.S.) certification label located in the

driver’s-side door area.

Weigh your vehicle on the scale with all of the

passengers and cargo that are normally in the

vehicle when pulling a trailer. Subtract the

actual vehicle weight from the GVWR. The

remaining amount is the available maximum

tongue/king pin load.

To avoid overloading the vehicle, be sure

to include the trailer tongue/king pin load as a

part of the cargo when determining how much

weight can be safely carried inside the vehicle.

GROSS AXLE WEIGHT (GAW)

The Gross Axle Weight (GAW) is the maximum weight placed on a single axle (front

and rear) that it is designed to safely carry.

To determine the GAW, load the vehicle as you would for towing and attach the

loaded trailer. At a public scale, with the loaded trailer attached, place only the

tow vehicle's front wheels on the scale to determine the actual front axle GAW.

To obtain the rear axle GAW, place all four tow vehicle's wheels on the scale. From

that figure, subtract the front GAW and you will have the rear GAW amount. The

cargo in the trailer and the vehicle may have to be distributed, or some removed

to meet the specified rating.

The GAW you come up with must not exceed the Gross Axle Weight Rating

(GAWR) for your vehicle. On NISSAN vehicles, the GAWR for both axles is listed on

the F.M.V.S.S. certification label.

MFD BY NISSAN MOTOR CO., LTD

DATE

GVWR

GAWR FR.

WITH

GAWR RR.

WITH

THIS VEHICLE CONFORMS TO

ALL APPLICABLE FEDERAL

MOTOR VEHICLE SAFETY

STANDARDS IN EFFECT ON

THE DATE OF MANUFACTURE

SHOWN ABOVE.

SEE OWNERS MANUAL FOR

ADDITIONAL INFORMATION.

TIRES

TYPE: TRUCK

MODEL: 3B000

COLOR TRIM TRANS

AXLE ENGINE

RIMS AT PSI

COLD SINGLE

RIMS AT PSI

COLD SINGLE

F.M.V.S.S.

Certification Label

2019 NISSAN Towing Guide

GROSS COMBINED WEIGHT (GCW)

The Gross Combined Weight (GCW) is the total weight of the tow vehicle with all

passengers, cargo, and fuel, plus the total weight of the trailer and all its cargo.

To determine the GCW, simply weigh your vehicle when fully loaded and ready to

tow, and add in the weight of the loaded trailer.

The GCW you come up with must not exceed the Gross Combined Weight

Rating (GCWR) for your vehicle. Refer to your vehicle owner’s manual to view the

maximum GCWR specification listed for your vehicle.

TRAILER TONGUE/KING PIN LOAD

The amount of trailer’s weight pressing down on the tow vehicle hitch ball is

called

trailer tongue load

(conventional trailer) or

king pin load

(5th wheel and

gooseneck trailers).

To measure trailer tongue/king pin load, place the tongue of the trailer on a scale

when the trailer is not

attached to the vehicle.

A separate vehicle jack —

not the trailer jack —

should be used, as the

location of the trailer jack

is rearward of the trailer

tongue and will not give

you an accurate

measurement of the true

tongue/king pin load.

Make sure the vehicle jack

is placed directly under the trailer tongue coupler, and the tongue is set at the

height/level of the tow vehicle hitch.

For proper handling, you must keep conventional trailer tongue load between

10-15% of the actual trailer weight, within the limits of the maximum trailer tongue

load allowable.

2019 NISSAN Towing Guide

For example, to determine the proper trailer tongue load for a 1,500-lb. trailer,

multiply the weight of 1,500 lbs. by 10% to arrive at a figure of 150 lbs. 5th wheel

and gooseneck trailer king pin load must be kept between 15-25% of the actual

trailer weight, within the limits of the king pin load allowable.

Some trailer types may require different trailer tongue loads for safe towing.

Always follow the trailer manufacturer’s recommendations for proper trailer set-

up and trailer tongue load. Keep the trailer tongue load within the maximum

trailer tongue load allowable. Additionally, make sure the vehicle has the payload

capacity available for the trailer tongue load.

Refer to your vehicle owner’s manual to view the maximum conventional trailer

tongue load listed for your vehicle.

WARNING – DO NOT exceed any of the individual vehicle weight ratings (GVWR,

GAWR, GCWR, etc.), regardless of trailer or hitch type. Overloading or improper

loading of a trailer can cause unsafe vehicle handling, braking and performance

and may lead to a serious accident and personal injury or death.

HITCH & TRAILER HEIGHT

It is important that your trailer floor and tongue ride as level as possible. This will

help prevent over-angling, bottoming-out, and improper tongue load and load

transfer. Therefore, the hitch or trailer tongue must be adjusted during the initial

vehicle/trailer fit-up to ensure a level ride. On some tandem axle trailers an

incorrect hitch height can result in uneven trailer axle loading. Ball mounts are

available in different configurations to adjust the hitch ball height.

TIRE PRESSURE

When towing a trailer, ensure that the tow vehicle’s tire pressures are inflated to

the recommended cold tire specification. You will find these figures in the vehicle

owner’s manual and on the tire pressure chart located in the vehicle. Trailer tire

condition, size, load rating, and tire pressure must be in accordance with the

trailer and tire manufacturer’s specifications.

2019 NISSAN Towing Guide

TOWING

SAFETY

Towing can significantly have an effect in altering the handling and performance

characteristics of your vehicle. Moreover, it puts increased strain on the engine and

drivetrain. Therefore, it is always a good idea to approach towing from the standpoint

of safety — whether you are purchasing equipment or actually pulling the trailer. Buy

or lease only quality equipment. You should follow a more frequent maintenance

schedule and check fluid levels, proper tire pressures, tire condition, etc., more often

when on the road to protect your vehicle.

WARNING - Always make sure your vehicle’s towing capacity is adequate for the

trailer you intend to tow. Be certain that you have all of the proper equipment needed

for safe towing, such as safety chains/cables, electric trailer brakes, electric trailer

brake controller, breakaway switch, and extended rear view mirrors to help ensure

against the possibility of a serious accident and personal injury or death.

LOADING YOUR TRAILER

WARNING - Taking the time to load and balance your trailer properly, will improve

overall handling and minimize the strain on your tow vehicle. Incorrectly, loaded

trailers tend to sway or swing from side to side, upsetting vehicle handling which

could result in a serious accident and personal injury or death. Careful loading and

balancing can help eliminate these problems.

As mentioned earlier, conventional trailer tongue load must fall between 10-15% of

the total trailer weight, or within the limits of the maximum trailer tongue load

specified by the trailer manufacturer. King pin load — if using a 5th wheel or

gooseneck trailer — must be between 15-25% of the total trailer weight.

WARNING - Excessive tongue/king pin

load can actually push down the tow vehicle

in back, lifting the front wheels to a point

where traction, steering response, and

braking may be severely reduced. Too little

tongue/king pin load can cause instability,

which may lead to swaying, “tail wagging” or

jackknifing which could result in a serious

accident or personal injury or death .

With this in mind, proper loading is extremely important. When loading a trailer,

60% of the total cargo weight should be positioned in the front portion of the

trailer and 40% in the back. Then, adjust the load until the proper tongue/king pin

load ratio is achieved.

60%

40%

2019 NISSAN Towing Guide

WARNING -The trailer load should be

balanced equally from side-to-side. Unequal

side-to-side loading can negatively affect

handling and braking. Once in place, all cargo

should be firmly secured to prevent shifting.

If the load should shift abruptly during

braking or cornering, it could quickly affect

the handling of your vehicle and cause a very

unsafe situation, loss of control or serious

accident or death.

● Do not carry flammable materials, such as

gasoline, in your trailer. In the event of an

an explosion or fire could occur, causing

personal injury or death.

PROVIDING FOR VEHICLE/TRAILER STABILITY

WARNING - Improper loading, excessive or insufficient trailer tongue/king pin

load, overloading, excessive trailer weight, poorly designed trailer suspensions,

crosswinds, and poor maintenance are all things that can affect the stability of

your vehicle and trailer combination. Vehicle instability may result in loss of

vehicle control and cause an accident, personal injury or death.

If swaying does occur, check the cargo load for proper balance and distribution to

ensure proper trailer tongue/king pin load. In addition, check the condition of the

suspension and shocks, as well as the tires, tire pressures, and wheel bearings on

both the tow vehicle and the trailer. If the swaying continues and your trailer is

suitably balanced and within the towing capacity limits of your vehicle, discontinue

towing and consult your NISSAN dealer or trailer manufacturer to determine the

cause.

VEHICLE SPEED

Please note that some states have specific regulations and speed limits for

vehicles that are towing trailers. Remember to reduce your speed in unsafe or

less-than-ideal road conditions or weather. When towing a trailer, braking

distances increase while handling agility decreases. Always leave yourself an extra

margin of distance to respond to emergencies.

PASSENGERS

WARNING - Never allow passengers to ride inside a trailer while it is being

towed because there

are not any passenger restraints in a trailer. Not only is this

unlawful in most areas, passengers could be seriously injured or killed during

sudden trailer movement or in an accident. In addition, trailers may allow fumes

from the tow vehicle to leak inside. This could result in carbon monoxide

poisoning from the engine exhaust.

2019 NISSAN Towing Guide

VEHICLE MODIFICATIONS

WARNING - DO NOT modify your vehicle beyond those required for proper

hitch installation, wiring hook-up, or adding extended mirrors on any NISSAN

vehicle being used for towing purposes. Changes to the drivetrain, suspension,

exhaust systems, frame structure/unibody, or other vehicle components are not

necessary for towing within the limits described in this guide. The towing limits of

your vehicle cannot be increased beyond the published limits described in this

guide or in your owner’s manual. Any changes may diminish the reliability and

longevity of your vehicle, void warranty coverage or possibly result in loss of

vehicle control and cause an accident, personal injury or death.

TOOL KIT

When towing, bring tools including, lugwrench for the trailer wheels, flares, a

flashlight, emergency reflectors, jumper cables, extra fuses, extra radiator coolant,

oil, and easily replaced spare parts such as taillight bulbs. You should also carry

spare tires for your tow vehicle and trailer, as well as a jack suitable for use on the

trailer. A trailer jack is an important part of safe towing. Choose a jack that can

raise and lower the trailer so that you can connect the coupler to and disconnect

it from the ball of your hitch. Choose one with a weight capacity that matches or

surpasses your trailer tongue weight.

WARNING - Be aware that your automotive jack is designed for lifting only your

vehicle during a tire change. Using an automobile jack to lift a trailer-bearing load

may be unstable possibly causing it to fall off the jack stand which may result in

property damage or serious injury or death.

BEFORE STARTING OUT

Before starting out on a trip, make one last inspection of the tow vehicle and

the trailer. Are the tire pressures correct? Are the safety chains/cables securely in

place? Has the cargo been tied down securely? Do all the lights work? Is the

coupler properly attached over the hitch ball and secured using a locking pin? Is

the breakaway switch hooked up and functioning properly? Are vehicle and

electric trailer brakes working properly?

Make a checklist of key items to inspect. Before towing, always check the tow

vehicle’s engine oil, transmission oil, and coolant before starting out. Finding a

potential problem while in your driveway is better than discovering it miles from

home.

2019 NISSAN Towing Guide

TOWING TIPS/ CAUTIONS & WARNINGS

If you have never towed a trailer before, be aware that it does take getting used

to. To begin with, towing noticeably affects your vehicle’s performance:

 It will not accelerate as quickly — an important point to keep in mind when

merging onto a highway.

 It will not stop as quickly. Leave more room than usual between you and the

traffic ahead, and brake sooner when coming to a stop.

 Abrupt maneuvering can unbalance the load and reduce the handling and

stability of your tow vehicle. Always be aware and plan ahead to make lane

changes and turns smoothly.

If possible, before you actually hit the open road, practice towing in a large

uncrowded area such as a safe, open place with minimal traffic. Become

especially familiar with backing up a trailer — the maneuver many people find

most difficult.

BRAKE SOONER

The combination of your tow vehicle and trailer obviously requires a greater

distance to stop. A good rule of thumb to remember is that for each 10 mph of

speed, allow yourself one tow vehicle and trailer length of distance between the

front of your vehicle and the vehicle ahead.

When braking, use firm but gradual pressure on the pedal rather than panic

braking.

WARNING - Applying the brakes abruptly or with too much force can cause a

sudden shift in weight which can cause the trailer to skid or jackknife at its point

of attachment with the vehicle. This, in turn, can throw the tow vehicle out of

control resulting in an accident, property damage or serious injury. If equipped

with an electric trailer brake controller, follow the recommended operational

instructions.

PASS CAREFULLY

As mentioned in the introduction to this section, because of the added weight of

the trailer, acceleration capability is reduced and you will require a longer

distance to pass another vehicle. Be certain you have sufficient time and space to

pass safely.

WARNING - Never attempt to pass on hills or when going around curves. This

could possibly result in loss of vehicle control and cause an accident, personal

injury or death.

CORNER MORE SLOWLY

Know your vehicle and trailer capabilities.

2019 NISSAN Towing Guide

WARNING - Entering a sharp corner too quickly or abruptly can “crack the

whip,” whereby the trailer can actually pull the tow vehicle off the road. Doing so

could cause a loss of vehicle control and result in accident, property damage or

personal injury.

Therefore, when approaching a relatively sharp corner, begin braking sooner than

you would when not towing. Do your braking in a straight line prior to the corner,

and turn smoothly into it. In addition, remember to make a wider turn than

normal to ensure that the trailer safely clears the inside of the turn.

WARNING - When towing a 5th wheel or gooseneck trailer, do not make sharp

turns while driving or backing as the trailer may contact the vehicle and cause

damage to both the trailer and vehicle, or result in an accident leading to

property damage or personal injury.

A special extended 5th wheel pin box or sliding hitch may be required to provide

additional trailer-to-truck clearance for tight maneuvering.

BACK UP WITH CAUTION

Backing up with a trailer is a difficult maneuver. The best way to steer is by

placing one hand at the bottom of the steering wheel to direct the trailer. The

trailer will go in the same direction your hand moves. If you want to turn the

trailer to the left, you will turn the steering wheel to the left. To turn the trailer to

the right, move the wheel to the right. All movements of the wheel should be

done in small increments. Of course, backing up should be done only at very slow

speeds. For large trailers that obstruct your rearward vision, have someone

outside the vehicle act as a “spotter” to guide you along.

PARK SMART

A tow vehicle and trailer can be an unwieldy combination in a small area, so

always try to park where you will have a relatively easy time maneuvering. Once

parked, always block the wheels on both the tow vehicle and the trailer.

Parking on a slope is not recommended. If, however, you must park on a slope

and your vehicle is equipped with an automatic transmission, there are some

precautions you should take:

 Have someone block the wheels once the tow vehicle and trailer are in position

and are being held by the vehicle’s brake.

 Next, apply the parking brake and only then move the gear lever into PARK.

CAUTION - If you move the lever into PARK before blocking the wheels and

applying the parking brake, it may be difficult later to shift out of PARK.

Transmission damage could also occur.

Page is loading ...

Nissan Sentra User guide

Nissan Sentra User guide

Related papers

Other documents