Sharp SMD3070AS User guide

SMD3070AS
Sharp
Brand
Sharp
Model
SMD3070AS
Category
Wall & ceiling mounts accessories
Type
User guide

This manual is also suitable for

Sharp SMD3070AS: Experience Culinary Excellence with Advanced Features

The Sharp SMD3070AS Microwave Drawer is designed to bring convenience and versatility to your kitchen. With its sleek design and advanced features, this microwave offers a wide range of cooking options to suit your culinary needs. Enjoy the ease of sensor cooking, allowing you to effortlessly prepare delicious meals with precise results. The spacious interior and turntable provide ample room for various dishes, ensuring even cooking and heating.

Sharp SMD3070AS: Experience Culinary Excellence with Advanced Features

The Sharp SMD3070AS Microwave Drawer is designed to bring convenience and versatility to your kitchen. With its sleek design and advanced features, this microwave offers a wide range of cooking options to suit your culinary needs. Enjoy the ease of sensor cooking, allowing you to effortlessly prepare delicious meals with precise results. The spacious interior and turntable provide ample room for various dishes, ensuring even cooking and heating.

E 1
C
N
H
E
F
D
A
B
J
L
I
M
K
G
Note: the face of the shelf must
sit 1
3
/4" (44.45 mm) back from
the face of the cabinet.
cabinet face
shelf face
O
24" Flush Mount DeFlector Vent: sKMD24F0As
INSTALLATION INSTRUCTIONS
1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C.
C
L
Top view
A
Anti-Tip block
Mounting cleat
B
C
Drawer face
Cabinet
face
Note: the mounting surface of the finished cleat must sit 1
1
/16" (26.97 mm) back
from the face of the cabinet [pushing the face of the drawer out
1
/4" (6.35 mm)].
Figure 1
Figure 2A
Important notes to the Installer
• Read all of the Installation Manual that is included with
the Microwave Drawer before installing in the ush mount
conguration.
• Observe all governing codes, ordinances, and safety
instructions.
•Be sure to leave these instructions with the consumer.
Parts includes:
Qty. Part number
1
PREF-B019MRP0
Flush Mount
Deector Vent
2
LX-CZB055MRE0
Mounting screws
TINSEB541MRR1
A. 6" (152.40 mm)
B. Suggested electrical outlet location
C. Anti-Tip block
D. 5" (127 mm)
E. 3-1/2" (88.90 mm)
F. 4" (101.60 mm)
G. 24-3/16" (614.35 mm) minimum
24-1/2" (622.3 mm) maximum
H. 14-13/16" (376.24 mm) to bottom of
Anti-Tip block
I. 1-1/16" (26.97 mm)
J. 23-1/2" (596.90 mm) minimum depth
K. 22" (558.8 mm)
L. 1-3/4" (44.45 mm)
M. 16-7/8" (428.62 mm) opening
N. Floor must support 100 lb (45.4 kg)
O. 1-3/4" (44.45 mm)
A. 22" (558.8 mm) mounting cleat opening width
B. 1/4" (6.35 mm)
C. 1-1/16" (26.97 mm)
E 2
Shelf detail showing the deflector vent installed.
Shelf detail showing the deflector vent during installation.
Position deflector vent and mark holes. Pre drill using a
1
/16" (1.57 mm) bit before mounting.
C
Front view
No oven
B
A
Suggested electrical
outlet location
Anti-Tip block
3
/4" (19.05 mm)
shelf
Side view
1
3
/4" (44.45 mm)
front face of shelf
Front face of cabinet
16
7
/8"
(428.62 mm)
flush opening
height
Move oven location
downward for extended
countertops for better
viewing angle.
Anti-Tip
block
3. Place the drawer adjacent to the wall or cabinet opening. Plug
the power supply cord into the electrical outlet.
4. Carefully guide the drawer into the prepared opening. Avoid
contact with the sides of the cutout opening and also pinching
the cord between the oven and the wall.
5. Slide the drawer all the way back until the mounting anges
touch the cleats mounted in the cabinet opening.
6. Open the drawer. Using the 4 holes on the drawer as a template,
pre drill the cabinet using a 1/16” (1.57 mm) bit. See Figure 4.
Figure 3A
Figure 4
Figure 3B
2. Install deector as shown in Figure 3A.
7. Secure the drawer with the 4 screws supplied.
Mounting
flange
Figure 2B
Figure 2C
A. 22" (558.8 mm) mounting cleat opening width
B. 24-3/16" (614.35 mm) minimum
24-1/2" (622.3 mm) maximum
ush opening width
C. 3/4" (19.05 mm) shelf
E 3
C
N
H
E
F
D
B
A
J
L
I
cabinet face
shelf face
O
G
K
M
Note: the face of the shelf must
sit 1
3
/4" (44.45 mm) back from
the face of the cabinet.
30" Flush Mount DeFlector Vent: sKMD30F0As
INSTALLATION INSTRUCTION
1. Prepare cabinet opening as shown in Figures 1, 2A, 2B, 2C.
C
L
Top view
A
B C
Anti-Tip block
Mounting cleat
Drawer face
Cabinet
face
Note: the mounting surface of the finished cleat must sit 1
1
/16" (26.97 mm) back
from the face of the cabinet [pushing the face of the drawer out
1
/4" (6.35 mm)].
Figure 1
Figure 2A
Important notes to the Installer
• Read all of the Installation Manual that is included with
the Microwave Drawer before installing in the ush mount
conguration.
• Observe all governing codes, ordinances, and safety
instructions.
•Be sure to leave these instructions with the consumer.
Parts includes:
Qty. Part number
1
PREF-B020MRP0
Flush Mount
Deector Vent
2
LX-CZB055MRE0
Mounting screws
A. 6" (152.40 mm)
B. Suggested electrical outlet location
C. Anti-Tip block
D. 5" (127 mm)
E. 3-1/2" (88.90 mm)
F. 4" (101.60 mm)
G. 30-5/16" (769.92 mm) minimum
30-5/8" (777.87 mm) maximum
H. 14-13/16" (376.24 mm) to bottom of
Anti-Tip block
I. 1-1/16" (26.97 mm)
J. 23-1/2" (596.90 mm) minimum depth
K. 28-1/2" (723.9 mm)
L. 1-3/4" (44.45 mm)
M. 16-7/8" (428.62 mm) opening
N. Floor must support 100 lb (45.4 kg)
O. 1-3/4" (44.45 mm)
A. 28-1/2" (723.9 mm) mounting cleat opening width
B. 1/4" (6.35 mm)
C. 1-1/16" (26.97 mm)
E 4
Shelf detail showing the deflector shield installed.
Shelf detail showing the deflector vent during installation.
Position deflector vent and mark holes. Pre drill using a
1
/16" (1.57 mm)
bit before mounting.
Front view
No oven
C
B
A
Suggested electrical
outlet location
Anti-Tip block
1 Sharp Plaza Suite 1, Mahwah, New Jersey 07495-1123, USA • 1-800-BE-SHARP (237-4277)
335 Britannia Road East, Mississauga, Ontario, L4Z 1W9, Canada
3. Place the drawer adjacent to the wall or cabinet opening. Plug
the power supply cord into the electrical outlet.
4. Carefully guide the drawer into the prepared opening. Avoid
contact with the sides of the cutout opening and also pinching
the cord between the oven and the wall.
5. Slide the drawer all the way back until the mounting anges
touch the cleats mounted in the cabinet opening.
6. Open the drawer. Using the 4 holes on the drawer as a template,
pre drill the cabinet using a 1/16” (1.57 mm) bit. See Figure 4.
Figure 3A
Figure 4
Figure 3B
2. Install deector as shown in Figure 3A.
7. Secure the drawer with the 4 screws supplied.
Mounting
flange
Figure 2B
Figure 2C
3
/4" (19.05 mm)
shelf
Side view
1
3
/4" (44.45 mm)
front face of shelf
Front face of cabinet
16
7
/8"
(428.62 mm)
flush opening
height
Move oven location
downward for extended
countertops for better
viewing angle.
Anti-Tip
block
A. 28-1/2" (723.9 mm) mounting cleat opening width
B. 30-5/16" (769.92 mm) minimum
30-5/8" (777.87 mm) maximum
ush opening width
C. 3/4" (19.05 mm) shelf
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Sharp SMD3070AS User guide

SMD3070AS
Sharp
Brand
Sharp
Model
SMD3070AS
Category
Wall & ceiling mounts accessories
Type
User guide
This manual is also suitable for

Sharp SMD3070AS: Experience Culinary Excellence with Advanced Features

The Sharp SMD3070AS Microwave Drawer is designed to bring convenience and versatility to your kitchen. With its sleek design and advanced features, this microwave offers a wide range of cooking options to suit your culinary needs. Enjoy the ease of sensor cooking, allowing you to effortlessly prepare delicious meals with precise results. The spacious interior and turntable provide ample room for various dishes, ensuring even cooking and heating.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents