Infinity Smart Chair X3 3D/4D, IT-8500 X3 3D/4D, IT-8500™ X3 3D/4D, IT-8500™ X3 3D/4D Massage Chair, Smart Chair X3 3D/4D Massage Chair Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Infinity Smart Chair X3 3D/4D Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Smart Chair X3
Massage Chair
Airbag IntensityIn-Use Screen
Quick Start
Guide
72 Stard Road, Seabrook, NH 03874
603-910-5000
www.infinitymassagechairs.com
Version 1.0
After a Massage program is selected, In-use
screen displays all settings to that program.
Share a photo and tag us:
Don’t forget to use #lovemyinfinitychair
@Infinitymassagechairs
@infinity_chairs
While in-use screen is showing
- Press OK for shortcut to zero gravity
- Press Up on directional button to
increase back roller speed
- press Down on directional button to
decrease back roller speed
Press arrow keys to select Press arrow keys to select
1
2
3
4
5
O
FORCE
PART
AIRBAG
1
2
3
4
Indicators
Back-roller position & direction
Bluetooth connected
3D intensity level
Active airbags
Active rollers
Time left
1
2
3
5
6
7
1
2
3
4
5
7
6
@Infinitymassagechairs
Multi-Functional Screen
Use the directional buttons
below to navigate these
menu screens. Then press
OK to select
On/Off – Powers up the
remote or returns the chair
to the exit position and
powers down remote
Menu – Shortcut to the
home page of all menu
screens
OK – After navigating to the
command desired on the
display, push OK to select
Heat – Press to start the
heating function. The
indicator screen will light up.
Press again to turn off the
heating function. The
indicator will turn off
Feet Adjust – Press and hold
up arrow to bring foot rest
up, press and hold down
arrow to bring foot rest down
3D – Press to increase or
decrease 3D intensity of
back mechanism. In-use
screen displays intensity dial
3D
Auto – Select from seven pre-set
massage programs:
Directional Buttons – Press up, down,
left or right to navigate the display
screen
Seat Back Position – Press and hold
down arrow to recline the seat back,
press and hold the up arrow to
upright the seat back
Back Adjustment – Back mechanism
position adjustment; press and hold
up to raise, press and hold down to
lower. Use during initial body scan
fine tuning or in manual point zone
mode
Airbags – Shortcut button to Airbag
intensity settings
Sports Refresh
Extension
Rest & Sleep
W orking & Relief
Neck & Shoulder
Waist & Spine
SWAY
When in-use screen is showing:
Use directional buttons
- Right side to increase intensity
- Left side to decrease intensity
When main menu is showing:
Navigate to AIRBAG and press OK
navigate to FORCE select OK
Set intensity desired by selecting 1 (lowest)
through 5 (highest) and pressing OK
Note: Airbags must be active to set intensity level
/