2. Howdens Joinery
  3. HKE0054

Howdens Joinery HKE0054 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Howdens Joinery HKE0054 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Hob Wall/Half Height Wall
Bridging Cabinets
Assembly
1
600mm Hob Cabinet
(Flapstay not required)
Mark out the cabinet end fixing
positions and secure bracket
using the screws
3
2
Mark out the frontal and fit the bracket
using the screws to secure
137mm
Door Top Edge
32mm
141mm
32mm
32mm
37mm
500/600/800mm
Half Height Cabinet
1000mm Bridging Cabinet
Fit the door to the cabinet
using the hinges
4
Clip on the flapstay
to the brackets,
clicking into position
CLICK
CLICK
Adjustment setting
number
ADJUSTMENT
Adjust the tension in the
flapstay +/- to frontal weight
(if applicable with handle fitted)
Note: A power driver
with a PZ-2 bit can be used
HD414011
/