AzureWave Technologies TLZ-CM389NF User manual

Brand: AzureWave Technologies

Model: TLZ-CM389NF

Type: User manual

AzureWave Technologies TLZ-CM389NF is an FCC-compliant device that operates within specific guidelines. While the manual does not explicitly state the capabilities of the device, it does mention that it complies with Part 15 of the FCC Rules, which pertain to unintentional radiators. This suggests that the device may be capable of transmitting and receiving radio frequency signals for various purposes, such as wireless communication or data transfer. However, the specific use cases and functionalities of the device will depend on how it is integrated into an end product by the OEM integrator.

ONE-YEAR-LIMITED WARRANTY

Owner:!______________________________!

Model:!______________________________!

Serial!Number:!________________________!

Date!of!Purchase:!_____(D)_____(M)_____(Y)!

The limited warranty set forth below is provided by XXXXX, Inc.. The Warranty shall not

extend to anyone other than the original purchaser of the product.

This product is warranted against defective materials or workmanship for one year from the date

of original purchase, and is limited to repair, adjustment and/or replacement of defective parts.

This Warranty covers all defects encountered in normal use of the product but not normal wear

and tear such as scratches, etc.

This Warranty does not apply to defects due to abuse, mishandling, repair by a non-authorized

agent, unsuitable storage, or unauthorized modification.

This Warranty also does not cover defects due to the use of accessories, attachments, parts or

devices that do not conform to the product’s specifications.

Warranty Claim Instruction:

While the product is under the term of this warranty, if you have a claim, please return the

product to the dealer where you purchased it (if that is not possible, return it to us.) along with the

bill of sale from an authorized dealer, this Warranty card, and a description of the defect claimed.

If we determine your product to be defective, we will repair or replace it at NO CHARGE.

Shipping Instruction Policy:

If you return the product by mail or delivery service, be sure to pack it in its original box or

comparable packaging and insure it. You must pre-pay all shipping charges and insurance costs

when returning it to the dealer or us (address listed below.) If we determine that the warranty has

been voided, we will notify you with a repair cost estimate. Your authorization will be necessary

before any repairs are made at your expense.

FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

This device must accept any interference received, including interference that may

cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital

device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiated radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible

for compliance could void the user‘s authority to operate the equipment.



RF Exposure Information

This device complies with FCC radiation exposure limits set forth for an uncontrolled

environment. In order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches)

during normal operation.

IMPORTANT NOTE:

This module is intended for OEM integrator. The OEM integrator is still responsible for

the FCC compliance requirement of the end product, which integrates this module.

20cm minimum distance has to be able to be maintained between the antenna and

the users for the host this module is integrated into. Under such configuration, the

FCC radiation exposure limits set forth for an population/uncontrolled environment

can be satisfied.

Any changes or modifications not expressly approved by the manufacturer could void

the user's authority to operate this equipment.

USERS MANUAL OF THE END PRODUCT:

In the users manual of the end product, the end user has to be informed to keep at

least 20cm separation with the antenna while this end product is installed and

operated. The end user has to be informed that the FCC radio-frequency exposure

guidelines for an uncontrolled environment can be satisfied. The end user has to also

be informed that any changes or modifications not expressly approved by the

manufacturer could void the user's authority to operate this equipment. If the size of

the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is

required to be available in the users manual: This device complies with Part 15 of

FCC rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference and (2) this device must accept any interference received,

including interference that may cause undesired operation.

LABEL OF THE END PRODUCT:

The final end product must be labeled in a visible area with the following " Contains

Transmitter Module FCC ID: TLZ-CM389NF". If the size of the end product is larger

than 8x10cm, then the following FCC part 15.19 statement has to also be available on

the label: This device complies with Part 15 of FCC rules.

Operation is subject to the following two conditions: (1) this device may not cause

harmful interference and (2) this device must accept any interference received,

including interference that may cause undesired operation.



AzureWave Technologies TLZ-CM389NF User manual

AzureWave Technologies TLZ-CM389NF User manual

AzureWave Technologies TLZ-CM389NF User manual

Other documents