Device Setup
Pairing the device with your phone:
Note: You can pair the device with your phone through Bluetooth® Technology or using
NFC® (Only for phones that support NFC® function). After the pairing is successful, the
device will automatically connect to the phone as soon as the device is turned on and within
range of the phone.
To manually pair using Bluetooth® Technology:
1. Make sure your mobile phone has Bluetooth® technology function activated.
2. Turn on the device by pressing and holding the Multifunction button until the LED
indicator flashes blue and red alternatively, and a ‘beep’ sound is heard.
3. On your phone, scan for nearby Bluetooth® technology devices, and select “AA2087”
in the available devices list.
4. Follow the pairing instructions that appear on your phone. If a passcode is required,
enter “0000”.
To pair the device using NFC®:
1. Make sure that the NFC® function of your phone is turned on and that the phone
screen is active.
2. Turn on the device by pressing and holding the Multifunction button until the LED
indicator flashes blue and red alternatively, and a ‘beep’ sound is heard.
3. Place your phone over the device so that the NFC® detection area of the device is
touching the NFC® detection area of your phone.
4. Follow the pairing instructions that appear on your phone. If a passcode is required,
enter “0000”.
Note:
- The battery meter of the device will be displayed automatically on the status bar of your
phone (only for iPhone, iPod, iPad).
- The device will automatically turn off if it is not paired to a phone within 5 minutes.
- All the pairing information will be stored even after the device is turned off.
Adjusting the Volume
To change the call or music volume:
1. During a call or while listening to music, press and hold the Track Backward (Volume
Decrease) button to decrease the volume.
2. To increase the volume, press and hold the Track Forward (Volume Increase) button.