Silvercrest 287316 Owner's manual

WIRELESS OPTICAL MOUSE

RATÓN ÓPTICO INALÁMBRICO

SFM 4 A1

IAN 287316

WIRELESS OPTICAL MOUSE

Operating instructions

RATÓN ÓPTICO INALÁMBRICO

Instrucciones de uso

US - EN Operating instructions Page 1

US - ES Instrucciones de uso Página 25

Before reading, unfold the page containing the illustrations and

familiarise yourself with all functions of the appliance.

Antes de empezar a leer abra la página que contiene las

imágenes y, en seguida, familiarícese con todas las funciones

del dispositivo.

SFM 4 A1 – Software CD

US-EN │ 1 ■SFM 4 A1

Contents

Introduction ..........2

Copyright .............2

Limitation on liability .....3

Intended use ...........3

Warning types .........4

Notes on trademarks ....5

Safety ...............5

Basic safety guidelines . . .5

Package contents .....9

Initial operation .......9

Check package contents .9

Disposal of packaging

materials .............10

Inserting/replacing the

batteries .............11

Connecting the

Nano USB receiver .....11

Power saving mode .....12

Changing

operating modes .......12

Installing the software . . .13

Conﬁguration of the mouse

buttons ..............14

Troubleshooting .... 16

Cleaning ........... 17

Storage ........... 17

Disposal ........... 18

Disposal of the device . . .18

Disposal of batteries . . . .18

Appendix .......... 19

Technical speciﬁcations . .19

FCC Compliance

Statement ............20

3 year limited warranty . .22

Distributor ............24

■ 2 │ US-EN SFM 4 A1

READ AND SAVE THESE

INSTRUCTIONS!

Introduction

Congratulations on the purchase of your new device.

You have selected a high-quality product. The operating

instructions are part of this product. They contain impor-

tant information on safety, usage, and disposal. Before

using the product, please familiarize yourself with all

operating and safety instructions. Use the product only

as described and for the speciﬁed range of applications.

Keep these operating instructions in a safe place. Please

also pass these operating instructions on to any future

owner(s).

Copyright

This documentation is subject to copyright protection.

Any copying or reproduction, including extracts thereof,

as well as the reproduction of images, even in a modiﬁed

state, is only permitted with the expressly written authori-

zation of the manufacturer.

US-EN │ 3 ■SFM 4 A1

Limitation on liability

All the technical information, data and instructions

regarding installation, connection and operation con-

tained in these operating instructions corresponds to the

latest information available to us at the time of printing

and takes our previous experience and know-how into

account.

No claims may be derived from the speciﬁcations,

ﬁgures and descriptions in these operating instructions.

The manufacturer assumes no responsibility for damage

caused by failure to observe these instructions, improper

use, incompetent repairs, unauthorized modiﬁcations, or

by the use of non-approved replacement parts.

Intended use

This wireless mouse is an information technology device

designed as an input device for a computer. The device

must not be used outside of enclosed spaces. This device

is not intended for use in companies or for other com-

mercial uses (e.g. oﬃce applications). This device is

intended only for domestic use. It is not intended for

any other use. Claims of any kind for damage resulting

from incorrect use will not be accepted. The risk shall be

borne solely by the user.

■ 4 │ US-EN SFM 4 A1

Warning types

The following warning types are used in these operating

instructions:

► WARNING indicates a hazardous situation that, if

not avoided, could result in death or serious injury.

► CAUTION indicates a hazardous situation that, if not

avoided, could result in minor or moderate injury.

► NOTICE indicates information that is considered im-

portant, but not hazardous (e.g. messages related to

property damage).

t "5JQJOEJDBUFTBEEJUJPOBMJOGPSNBUJPOUIBUXJMMBTTJTU

ZPVJOVTJOHUIFEFWJDF

Terminology

As used in this instruction manual in general and with

regard to safety information and warnings, the following

words are assumed to mean:

ŶMay: This word is understood to be permissive.

ŶShall: This word is understood to be mandatory.

ŶShould: This word is understood to be advisory.

US-EN │ 5 ■SFM 4 A1

Notes on trademarks

- USB® is a registered trademark of USB Implementers

Forum, Inc.

- Microsoft®, Windows® and other Microsoft product

names are registered trademarks of the Microsoft

Corporation.

- Intel® and Pentium® are registered trademarks of the

Intel Corporation.

- AMD® and AMD® Athlon™ are registered trademarks

of Advanced Micro Devices, Inc.

All other names and products may be trademarks or

registered trademarks of their respective owners.

Safety

This section contains important safety instructions for

using the device. Improper use may result in personal

injury and property damage.

Basic safety guidelines

To ensure safe handling of the device, follow the safety

guidelines set out below

LED radiation!

► Avoid damage to eyes. Do not stare into the LED

beam. Do not look directly at the LED beam using

optical instruments.

■ 6 │ US-EN SFM 4 A1

ŶThis device may be used by children who are 8 years

of age or older and by persons with reduced physical,

sensory or mental capabilities, or lack of experience

and knowledge, provided that they are under super-

vision or have been told how to use the device safely

and are aware of the potential risks. Children must not

play with the device. Cleaning and user maintenance

tasks must not be carried out by children unless they

are supervised.

ŶPrior to use, check the device for visible external

damage. Do not operate a device that has been

damaged or dropped.

ŶAlways place the device on a stable and level

surface. It can be damaged if dropped.

ŶDo not expose the device to direct sunlight or high

temperatures. Otherwise it may overheat and be

irreparably damaged.

ŶDo not place the product near heat sources, such

as radiators or other heat-generating devices.

ŶNever attempt to open the device.

ŶDo not make any unauthorized modiﬁcations or

alterations to the device.

US-EN │ 7 ■SFM 4 A1

ŶDo not expose the device to spraying or dripping

water and do not place liquid-ﬁlled objects, such

as vases or open drink containers, on or near the

device.

Risk of suﬀocation!

► Packaging materials, such as plastic ﬁlm, must not

be used as toys.

Mishandling the batteries

can cause ﬁres, explosions, leakages, or other

hazards!

► Do not throw the batteries into a ﬁre and do not

subject them to high temperatures.

► Do not open, deform, or short-circuit batteries, since

this can lead to chemical leakage.

► Do not mix old and new batteries.

► Do not mix alkaline, standard (carbon-zinc), or re-

chargeable (Ni-Cd, Ni-MH, etc.) batteries.

► Do not attempt to recharge non-rechargeable batteries.

Do not charge batteries unless they are explicitly

labeled as "rechargeable". There is a risk of explosion!

► Check the condition of the batteries at regular intervals.

Leaking chemicals can cause permanent damage to

the device. Take particular care when handling dam-

aged or leaking batteries. Risk of chemical burns!

Wear protective gloves.

■ 8 │ US-EN SFM 4 A1

► Leaking chemicals from a battery can cause skin

irritation. In event of contact with the skin, rinse with

copious amounts of water. If the chemicals come into

contact with your eyes, rinse them thoroughly with

water, and do not rub them. Consult a physician im-

mediately.

► Keep batteries out of the reach of children. Children

might put batteries into their mouth and swallow them.

If a battery has been swallowed, seek medical assis-

tance immediately as this can lead to severe internal

burns (or even death) within two hours.

► Always insert the batteries the right way (observe

correct polarity); otherwise there is a risk that they

could explode.

► If you do not intend to use the device for a long time,

remove the batteries.

US-EN │ 9 ■SFM 4 A1

Package contents

 Left mouse button

 Right mouse button

 Scroll wheel

 DPI button

 Back button

 Forward button

 Optical sensor

 Battery compartment

 Storage compartment for the Nano USB receiver

 Nano USB receiver

- Software CD

3 2 x 1.5V batteries

! Operating instructions

Initial operation

Check package contents

The following components are included in delivery:

● Wireless mouse SFM 4 A1

● Nano USB receiver 

● Software CD -

● 2 x 1.5V batteries 3(AA)

● These operating instructions !

■ 10 │ US-EN SFM 4 A1

t $IFDLUIFQBDLBHFGPSDPNQMFUFOFTTBOEGPSTJHOTPG

WJTJCMFEBNBHF

t *GUIFEFMJWFSZJTJODPNQMFUFPSEBNBHFIBTPDDVSSFE

BTBSFTVMUPGEFGFDUJWFQBDLBHJOHPSEVSJOHUSBOTQPSU

DPOUBDUUIFDVTUPNFSTFSWJDFIPUMJOF

♦ Remove all parts of the device from the packaging

and remove all packaging materials.

Disposal of packaging materials

The packaging protects the device from damage during

transport. The packaging materials have been selected

for their environmental friendliness and ease of disposal,

and are therefore recyclable.

Returning the packaging to the material cycle conserves

raw materials and reduces the amount of waste that is

generated.

Dispose of packaging materials that are no longer needed

in accordance with applicable local regulations.

US-EN │ 11 ■SFM 4 A1

Inserting/replacing the batteries

► Always use batteries from the same manufacturer and

of the same type. Always replace both batteries at

the same time.

♦ Open the battery compartment  on the underside

of the wireless mouse.

♦ Insert 2 x 1.5V AA batteries into the battery com-

partment  (observe correct polarity). Insert the ﬁrst

battery in the lower compartment followed by the

second battery in the higher compartment. Ensure

that the plastic strip is positioned under the batteries;

this will make future battery exchanges easier.

♦ Close the battery compartment .

Connecting the Nano USB receiver

♦ Remove any other mouse that is connected to your

computer and restart the computer.

♦ Remove the Nano USB receiver  from the storage

compartment  on the bottom of the wireless mouse.

♦ Connect the Nano USB receiver  to a free USB

port on your computer while it is running.

■ 12 │ US-EN SFM 4 A1

The operating system recognizes the new hardware and

automatically installs the necessary drivers. After the

installation of the driver is complete, the wireless mouse

is ready for operation and can be used.

Power saving mode

The wireless mouse features a power saving mode.

ŶIf you turn the computer oﬀ, the wireless mouse auto-

matically turns oﬀ after approximately 8 minutes in

order to save power.

ŶIf you disconnect the Nano USB receiver  from

the computer, the wireless mouse automatically turns

oﬀ after approximately 8 minutes in order to save

power.

ŶIf you do not click, scroll, or move the wireless mouse,

it turns oﬀ after approximately 8 minutes. As soon as

you press any button on the wireless mouse or use the

scroll wheel, the wireless mouse turns back on.

Changing operating modes

You can use the DPI button  to switch the sampling

rate sensitivity between 1,000 dpi, 1,500 dpi, and

2,000 dpi. A higher DPI setting helps your mouse detect

and respond to smaller movements.

US-EN │ 13 ■SFM 4 A1

Installing the software

To be able to use the full functionality of the mouse, you

must install the supplied software.

♦ Insert the supplied software CD - in the CD-ROM

drive of your computer.

The installation process should start automatically.

♦ If this is not the case, start the "setup.exe" ﬁle on the

CD-ROM manually by double-clicking it.

♦ Install the software as described in the on-screen

instructions.

■ 14 │ US-EN SFM 4 A1

Conﬁguration of the mouse buttons

You can use the software to customize the mouse

functions according to your personal preferences.

t 5IFGPMMPXJOHJMMVTUSBUJPOBOEEFTDSJQUJPOBSFCBTFE

POUIFPQFSBUJOHTZTUFN.JDSPTPGU®8JOEPXT®

5IFTDSFFOEJTQMBZNBZEJéFSGPSPUIFSPQFSBUJOH

TZTUFNT

♦ Double-click this icon in the system tray (bottom

right of your screen, next to the clock) or click on

the icon with the right mouse button and select

"Mouse properties" from the context menu.

US-EN │ 15 ■SFM 4 A1

The conﬁguration menu for the mouse appears.

♦ Select the tab "Conﬁguration of mouse button".

This allows you to set a function for each of the ﬁve

mouse buttons.

♦ Click on the drop-down menu for the corresponding

mouse button and select a function from the menu.

♦ To apply the changes, click on "Apply" (the window

remains open) or on "OK" (the window closes).

■ 16 │ US-EN SFM 4 A1

♦ Select "Restore to default" to return the buttons to

their original functions.

The other tabs in this conﬁguration menu contain settings

for the respective operating system.

Troubleshooting

If the wireless mouse is not recognized after installation

or does not respond to input, check the following:

♦ Check to ensure that the batteries have been inserted

the right way.

♦ Check that the Nano USB receiver  is properly

connected to the computer.

♦ Try using a diﬀerent USB port on your computer.

♦ Check the capacity of the batteries and, if necessary,

replace them.

♦ Note: You should use a mouse pad or similar if you

are using the wireless mouse on a glass surface or

any other reﬂective surface.

t *GUIFBCPWFNFOUJPOFETPMVUJPOTEPOPUSFTPMWFUIF

QSPCMFNQMFBTFDPOUBDUDVTUPNFSTFSWJDF

US-EN │ 17 ■SFM 4 A1

Cleaning

► Moisture penetrating the device can cause a short-cir-

cuit and damage the equipment. To avoid irreparable

damage, ensure that no moisture penetrates the

device during cleaning.

♦ Clean the housing only with a soft damp cloth and

a mild detergent.

Storage

If you are not going to use the device for a long period

of time, remove the Nano USB receiver  from your

computer and store it in the storage compartment

on the underside of the wireless mouse.

Remove the batteries from the device and store them in

a clean, dry location, away from direct sunlight.

Page is loading ...

Silvercrest 287316 Owner's manual

Related papers

Other documents