JasonL BJF1407PT Operating instructions

Brand
JasonL
Model
BJF1407PT
Type
Operating instructions

This manual is also suitable for

ASSEMBLY INSTRUCTIONS
Flip Top / Folding Mobile
Meeting Room Table
Page 1 of 6
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver.
2 persons required for installation
Special Note: No pre-drilled holes or nut inserts are provided.
Wood screws will be required to be drilled directly into underside of desk top.
1
2
3
4
5
6
7
COMPONENTS
Page 2 of 6
Uni Flip Table Frame Leg x2
Drop-rail Cross Tube x1
Pullbar x1
Side-handle x2
M8 x 80 Bolt x2
M5 x 30 Wood Screw x20
Table Top x1
ASSEMBLY INSTRUCTIONS
Flip Top / Folding Mobile
Meeting Room Table
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Note: To prevent possible scratches or damage, assemble the table upside
down on a soft surface such as a blanket, carpet or packaging.
Note: Attach Leg to the Top assembly by using Bolts, spring washer, flat
washer. Tighten using Allen Wrench provided.
Place the drop-rail cross tube (45mm diameter) between the
legs and fully tighten the M8x80 bolts through the plugs into the
drop-rail. Making sure the notch in the end of the drop-rail cross
tube is in-line with the bumps on the frames.
Fit the pullbar into the side-handles. Hook the side-handle wires into the flip mechanism.
Pencil mark the centre-line of table top underside. Locate the
frame in the centre of worksurface and fully tigthen using the
M5x30 screws.
Page 3 of 6
ASSEMBLY INSTRUCTIONS
Flip Top / Folding Mobile
Meeting Room Table
Need help!
Call us on
1300 527 665
www.jasonl.com.au
01 02
03 04
Screw fix the side-handles using M5x30 wood screws.
Page 4 of 6
ASSEMBLY INSTRUCTIONS
Flip Top / Folding Mobile
Meeting Room Table
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05
Page 5 of 6
ASSEMBLY INSTRUCTIONS
Flip Top / Folding Mobile
Meeting Room Table
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Holes position for mechanism
and side-handles
Locked connector link Unlocked connector link
Page 6 of 6
ASSEMBLY INSTRUCTIONS
Flip Top / Folding Mobile
Meeting Room Table
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Holes position for Optional
connector links
Install optional
connector links to
enable you to join
multiple tables
together.
Statement of use:
Uni flip tables are designed for general
commercial use in boardrooms, conference
rooms & training rooms.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

JasonL BJF1407PT Operating instructions

Brand
JasonL
Model
BJF1407PT
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents