YeStarry WeChef 3/8 inch Pex Pipe Crimping Tool Crimper User manual

PEX Crimper

User Manual

Warnings

1. This clamp tool should be used only for its intended purpose. Do not

use it for other purposes for safety concern.

2. Keep this product out of reach of children.

Adjusting Pressure

Unclench the clip from the back of the pressure rod to release the

pressure rod.

Adjust the pressure.

Push back the clip onto the

pressure rod.

Operation Instructions

Slide the PEX clamp ring over the

tubing.

Fully insert the PEX fitting into

the PEX tubing until the fitting’s

shoulder touches the tubing.

Pull the handles of the tool to

the opposite sides.

Pull down the right handle and

then the jaw will open.

Make sure the jaw of the tool is

centered over the clamp ring.

Press both handles of the tool

together completely.

Checking the Connection with Go / No-Go Gauge

Check if the connection is made properly by referring the image

showed below.

This manual is also suitable for

Download PDF