Playing Music with a Bluetooth Connection
1. Move the “On / Off” switch to the “On” position.
2. The BlueROCK will make a loud beep and the LED
indicator light will flash, indicating that the speaker
is in pairing mode. If a device is not connected
after 30 seconds, the speaker will leave pairing
mode and enter sleep mode. Turn the speaker off
and then on again to re-enter pairing mode.
3. On your mobile device: Turn Bluetooth on, search
for Bluetooth devices, and select the speaker.
4. If you are prompted to enter a password to complete
pairing, enter 0000. The BlueROCK will beep,
indicating that it has successfully paired with your
device and is ready for use.
Note: If the BlueROCK is moved out of range or runs
out of power and drops the connection to your
portable device, then you will need to recharge or
move the BlueROCK closer to your portable
device and return to step 1 above to re-establish the
Bluetooth connection.
Playing Music with a Line In Connection
1. Move the “On / Off” switch to the “Off” position.
2. Plug the provided audio cable into the BlueROCK
and then into your portable device.
3. Move the “On / Off” switch to the “On” position.
The BlueROCK is now ready for use.