Sinn Diving Watch U1 B Product information

Sinn
Brand
Sinn
Model
Diving Watch U1 B
Type
Product information
U1 B
THE DIVING WATCH MADE OF
GERMAN SUBMARINE STEEL WITH BLUE DIAL.
U1 B: solid stainless steel bracelet with an expandable
folding safety clasp. ø 44 mm (Fig.: 1:1)
U1 B: blue silicone strap with an expandable folding
safety clasp. ø 44 mm (Fig.: 1:1)
Large picture on the front:
U1 B: silicone strap with an expandable folding safety
clasp.
U1 B – luminous. (Fig.: 1:1)
DNV GL verifies and certifies the pressure resistance
of our U1 B to a diving depth of 1,000 m as well as
temperature resistance and function based on EN250
and EN14143, the European standards for diving
equipment.
Back and side views. (Fig.: 1:1)
Striking lines, minimalistic displays and clear readability define the diving watches in the U1
series. A special feature of the U1 B is the blue electroplated dial.
The luminous white indices and hands provide a strong contrast to the blue dial, ensuring
outstanding readability at all times. The distinctive colours of the U1 B are further emphasised
by a blue silicone strap.
The case made of high-strength German Submarine Steel is extremely seawater-resistant
and also possesses the highest level of non-magnetic properties. Hardened using TEGIMENT
Technology and therefore especially scratch-resistant, the captive diver’s bezel with minute
ratcheting is virtually impossible to detach by being knocked off.
DNV GL verifies and certifies the pressure resistance of the U1 B to a diving depth of
1,000metres and its temperature resistance and functionality in accordance with the
European diving device standards. Users of the U1 B can thus be assured that they are
wearing a precise and reliable diving watch on their wrist.
Model
The Diving Watch made of
German Submarine Steel with blue dial.
Blue electroplated dial
Case and crown made of high-strength seawater-resistant German Submarine Steel
Tested based on European diving equipment standards and certified by DNV GL
Pressure-resistant to 1,000 m diving depth (100 bar), certified by DNV GL
Captive diver's bezel with minute ratcheting
Bezel with TEGIMENT Technology and therefore especially scratch-resistant
Sapphire crystal glass
Resistant to low pressure
Prices
With leather strap with toothed buckle EUR 1,650
With silicone strap with folding safety clasp EUR 1,820
With solid bracelet with folding safety clasp EUR 1,820
As at: October 2018 As at: October 2018
Sinn Spezialuhren GmbH ∙ Wilhelm-Fay-Straße 21 · 65936 Frankfurt am Main · Tel +49 (0)69 97 84 14-200 · Fax +49 (0)69 97 84 14-201 · www.sinn.de/en · [email protected]
  • Page 1 1
  • Page 2 2

Sinn Diving Watch U1 B Product information

Sinn
Brand
Sinn
Model
Diving Watch U1 B
Type
Product information
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents