CLS Luxo 3 Basic CoB Owner's manual

Type
Owner's manual
www.cls-led.com www.cls-led.com
CLS LUXO 3 BASIC COBCLS LUXO 3 BASIC COB
h
CeilingWall 350º 30º 10 cm 150 cm 220 gr 50.000 h28º 37,5º 62º1 x CoB
IP40 3000K2700K Max.
700 mA
Max.
10 Watt
Phase
dimmable
1-10V
dimmable
DMX
dimmable
7,5 cm
ø
DRIVER
EXCLUDED
DRIVER
External
2
Manual V2.7 - November 2020
INDEX
Index 2
Safety information 2
Content 2
Technical 3
Specifications 3
CONTENT
SAFETY INFORMATION
Always switch o mains power
of the driver before connecting
or maintaining any fixtures!
Qualified
technician
Ambiance
Max. 40º
Do not stare
into the LED
Block access
below the work
area when
maintaining
the unit
Use a source
of AC power
that complies to
local electrical
codes
Make sure all
connectors are
connected
properly
Don’t install in
a flammable
or explosive
area
Warning!
Some surfaces
can be hot
Don’t modify
or install
genuine parts
on this product
Installation 4
Accessories 4
Lensplate replacement 5
Wiring diagram Non dim drivers 6
Wiring diagram Mains dim drivers 8
Wiring diagram 1-10V dim drivers 9
Wiring diagram Casambi Bluetooth 10
Wiring diagram DALI dim drivers 11
Wiring diagram LDC-41 driver 12
List of symbols 13
h
CeilingWall 350º 30º 10 cm 150 cm 220 gr 50.000 h28º 37,5º 62º1 x CoB
IP40 3000K2700K Max.
700 mA
Max.
10 Watt
Phase
dimmable
1-10V
dimmable
DMX
dimmable
7,5 cm
ø
DRIVER
EXCLUDED
DRIVER
External
www.cls-led.com www.cls-led.com
3 4
Ø90 mm
Ø75 mm
Cut-out size
- 15º / +15º
ø 90 mm
55 mm
Tools
TECHNICAL
SPECIFICATIONS
LED: 1 x CoB
Available colours: 2700K & 3000K
Lenses: 28º, 37,5º, 62º
Power supply: Max. 700mA
Power consumption: Max. 10 Watt
Housing: Aluminum brushed, white coated or
black coated
Weight: 220 gr
IP value: IP40
Cable length: 150 centimeter
Swivel angle: +15º / -15º, rotate 350º
Measurements: ø 70 x 55 mm (øxh)
Ambient temperature: -10º C till +40º C
min. 100 mm ø 75mm
Suspended
ceiling:
100 mm space
is required for
ventilation
Cut-out size
INSTALLATION
ACCESSORIES
ACCESSORIES
113002 CLS LDC-41 GIII DMX LED dimmer 4 channels 0.35-1A per channel
87129900 CLS SmartConnect 2-fold junction box & shortcircuit connect.
87129901 CLS SmartConnect 2-fold junction box with 5 metre cable. 87129905
CLS SmartConnect, 6-fold junctionbox & shortcircuit connect.
87129915 CLS SmartConnect short circuit plugs (10pcs)
872010 CLS Dimmer electr. 1-10V for MT35/MTD44 LED driver
872019 CLS Dimmer Jung phase cut max. 270VA 230-240VAC
874001 CLS ND 001 non dim, 100 - 240 V, 700mA driver
874004 CLS ND 004 non dim, 198 - 264 V, 250-1050mA driver
874003 CLS ND UNI non dim driver, 220 - 240 V, 300-1050mA driver
874101 CLS MD 001 mains dim. 198-264V, 700mA driver
874104 CLS MD 004 mains dim. 198-264V, 250-700mA driver
874201 CLS VD 001, 1-10V dim, 99-264 V, 350-900mA driver
874204 CLS VD 004, 1-10V dim, 99-264 V, 350-900mA driver
874208 CLS VD 008, 1-10V dim, 99-264 V, 250-700mA driver
874301 CLS DD 001, DALI dim, 99-264 V, 250-700mA driver
874304 CLS DD 004, DALI dim, 99-264 V, 350-700mA driver
875014 CLS CD UNI driver, 230 V, Casambi Bluetooth control, 300-700mA driver
911367 CLS LDC SmartConnect block LDC to SmartConnect system
Y103001 CLS Luxo 3 Basic Cob reflector spot 28º
Y103002 CLS Luxo 3 Basic Cob reflector medium flood 37,5º
Y103003 CLS Luxo 3 Basic Cob reflector flood 62º
www.cls-led.com www.cls-led.com
65
REFLECTOR REPLACEMENT
1
4
5 6
2
3
Make sure
the reector falls
straight over the
LED, in the 2
indicated holes
Do not use
any force
while
setting the
reector
Handle all
parts with care
during the next
steps. Make sure
not to touch
the LED!
Unscrew
the front of
the heat sink
in an upwards
facing position
WIRING DIAGRAM NON DIM DRIVER
CLS ND 001, non dimmable, 700mA driver
19 x 115 x 34 mm (hxwxd)
120 ~180 cm cable
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
120 ~ 180 cm cable
115 mm
34 mm
Always use 1 piece of Luxo 3 CoB on the CLS ND 001
CLS Luxo 3 CoB
# L-3-X-XX-3
CLS ND 004
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS ND 004, non dimmable, 250-1050mA driver
30 x 129,5 x 42 mm (hxwxd)
Always use 2 - 4 pcs of Luxo 3 CoB on the CLS ND 004
120 ~180 cm cable
120 ~ 180 cm cable
129,5 mm
42 mm
CLS Luxo 3 CoB
# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com
7 8
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS ND UNI, non dimmable, 300-1050mA driver
22 x 146 x 43 mm (hxwxd)
Always use 1 - 4 pcs of Luxo 3 CoB on the CLS ND UNI
120 ~180 cm cable
120 ~ 180 cm cable
146 mm
43 mm
CLS ND UNI
CLS Luxo 3 CoB
# L-3-X-XX-X
Always switch off mains power of the driver before connecting any fixtures!
WIRING DIAGRAM MAINS DIM DRIVER
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS MD 001, mains dimmable, 700mA driver
21 x 94 x 38 mm (hxwxd)
Always use 1 piece of Luxo 3 CoB on the CLS MD 001
CLS MD 001
120 ~180 cm cable
94 mm
38 mm
CLS Dimmer Jung phase cut
max. 270VA 230-240VAC
# 872019
80,5 mm (w)
80,5 mm (h)
L
N
Max. 12 pieces of MD 001 on
1 CLS dimmer Jung phase-cut
CLS Luxo 3 CoB
# L-3-X-XX-3
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS MD 004, mains dimmable, 250-700mA driver
34 x 166 x 46 mm (hxwxd)
Always use 1 - 4 pcs of Luxo 3 CoB on the CLS MD 004 120 ~180 cm cable
CLS Dimmer Jung phase cut
max. 270VA 230-240VAC
# 872019
80,5 mm (w)
80,5 mm (h)
L
N
Max. 12 pieces of MD 004 on
1 CLS dimmer Jung phase-cut
CLS MD 004
46 mm
166 mm
CLS Luxo 3 CoB
# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com
9 10
WIRING DIAGRAM 1-10V DIM DRIVER
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB
total cable length is max. 10 m
CLS VD 001, 1-10V dimmable, 350-900mA driver
22 x 100 x 52 mm (hxwxd)
CLS VD 001
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V
# 872010
L
N
120 ~180 cm cable
* 150 cm cable
Max. 12 pieces of VD 001 on
1 CLS Dimmer electr. 1-10V
Always use 1 - 2 pcs of Luxo 3 CoB on the CLS VD 001
52 mm
100 mm
CLS Luxo 3 CoB
# L-3-X-XX-3
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB
total cable length is max. 10 m
CLS VD 004, 1-10V dimmable, 350-900mA driver
21 x 103 x 67 mm (hxwxd)
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V
# 872010
L
N
120 ~180 cm cable
* 150 cm cable
Max. 12 pieces of VD 004 on
1 CLS Dimmer electr. 1-10V
Always use 1 - 4 pcs of Luxo 3 CoB on the CLS VD 004
CLS VD 004
67 mm
103 mm
CLS Luxo 3 CoB
# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
CLS
VD 008, 1-10V dimmable, 250-700mA driver
22 x 124 x 79 mm (h
xwxd)
120 ~180 cm cable
Max.
12 pieces of VD 008 on
1 CLS Dimmer elec
tr. 1-10V
Always use 1 - 6 pcs of Luxo 3 CoB on the CLS VD 008
CLS VD 008
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB
total cable length is max. 10 m
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer elec
tr. 1-10V
# 872010
L
N
* 150 cm cable
79 mm
124 mm
CLS Luxo 3 CoB
# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS CD UNI, Casambi Bluetooth, 350-700mA driver
30 x 108 x 44 mm (hxwxd)
Always use 2 - 4 pcs of Luxo 3 CoB on the CLS CD UNI
120 ~180 cm cable
120 ~ 180 cm cable
108 mm
44 mm
CLS Luxo 3 CoB
# L-3-X-XX-X
CLS CD UNI
WIRING DIAGRAM CASAMBI BLUETOOTH CONTROL
www.cls-led.com www.cls-led.com
11 12
WIRING DIAGRAM DALI DIM DRIVER
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total
cable length is max. 10 m
CLS DD 001, DALI dimmable, 250-700mA driver
22 x 100 x 52 mm (hxwxd)
CLS DD 001
120 ~180 cm cable
120 ~180 cm cable
* 150 cm cable
Always use 1 - 2 pcs of Luxo 3 CoB on the CLS DD 001
DA1DA2
Controller
Supporting DALI
CLS Luxo 3 CoB
# L-3-X-XX-3
52 mm
100 mm
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB
total cable length is max. 10 m
CLS DD 004, DALI dimmable, 350-700mA driver
21 x 103 x 67 mm (hxwxd)
120 ~180 cm cable
* 150 cm cable
DA1DA2
Controller
Supporting DALI
CLS DD 004
Always use 1 - 4 pcs of Luxo 3 CoB on the CLS DD 004
67 mm
103 mm
CLS Luxo 3 CoB
# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
WIRING DIAGRAM LDC-41 DIMMER
CLS Luxo 3 Basic CoB
# L-3-X-XX-3
Max. 4 pcs of Luxo 3 Basic CoB on each channel.
Depends on the power consumption of the
selected BT power supply.
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 Basic CoB
total cable length is max. 10 m
24 VDC
CLS LDC-41 GIII DMX LED
dimmer 4 channels
# 113002
25 mm (w)
Make sure the LDC-41 is set to 700mA!
* 150 cm cable
CLS LDC
SmartConnect Block
# 911367
CH1 = Channel 1
CH2 = Channel 2
CH3 = Channel 3
CH4 = Channel 4
CH1
CH2 CH3
CH4
CLS SmartConnect
6-fold junction box
# 87129905
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com
13 14
LIST OF SYMBOLS
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Internal or external
Pressure
Maximum pressure on the
fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the LEDs
in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided against
the intrusion of the product
Cutting length
Indicated by the cutting
marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Performance Zoom
Adjustable beam angle
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In dierent Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
DMX input
Fixture works on DMX512
protocol or Wireless DMX
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Combined product
Compose your own fixture
Warranty
3 or 5 years warranty on
the product
Energy label
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
r
h
ø w d
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
DRIVER
INCLUDED
DRIVER
EXTERNAL
Retail & Food LED modules
Clothing, furniture, kitchens, jewellery,
shoes, bread, meat, fish and
vegetables & fruit.
Lightsource
Equipped with a CLS, Citizen or a Xicato
LED module
Bluetooth controlled
By Casambi
PWM dimming
Traditional PWM dimming, DMX analog
or DMX Hybrid dim
CLS
DYNAMIC
COLOUR
COB
2020 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all aliated companies disclaim
liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to
use or reliance on the information contained in this manual. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from CLS-LED BV. Other legal information can be found in our General conditions, found on the back of
your CLS-LED BV invoice, inside the CLS catalogue or on our website www.cls-led.com/General-Terms.pdf
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

CLS Luxo 3 Basic CoB Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI